**
**
** VIA Rhine Family Fast Ethernet Adapter
**
** NDIS2 Driver for MS LAN MANAGER DOS Workstations
**
** v4.17 Jan , 2003
**
**
Introduction:
=============
The Ethernet NDIS2 Driver for LAN MANAGER DOS workstations confirms to the
Network Driver Interface Specification(NDIS2). This document shows you how
to setup the driver and how to use the enhanced functions by setting the
custom keywords in configuration file.
Contents of the Subdirectory:
=============================
LMDOS.TXT This file.
FETND.DOS The NDIS2 driver for Lan Requester DOS workstations.
PROTOCOL.INI Sample protocol.ini file.
..\..\NIF\FETND.NIF The installation information file.
Installation:
=============
Before starting with the installation process, make sure that the adapter
is properly installed and configured. You can use the diagnostic program
(A:\SETUP.EXE) to make sure your connection with the network is correct.
Installing driver procedure on LAN MANAGER DOS WorkStation:
-----------------------------------------------------------
1) If you install LAN Manager for the first time, you Install LAN Manager
to your HardDisk by running SETUP.EXE program from the setup diskette.
Upon completion of the workstation's last disk installation, you
will be asked if you want to import additional network drivers.
Answer "YES".
If you have already installed LAN Manager in your hard disk, run
SETUP.EXE from HardDisk and select "Actions"->"Import Network Driver"
option.
2) Insert the NDIS2 driver diskette into drive 'A' and follow the steps
on the screen. Select the "Plug&Play ETHERNET ADAPTER" card and press
"enter", then SETUP.EXE program will copy the necessary NDIS2 driver
programs from the driver diskette to your hard disk, according to LAN
MANAGER file structure.
3) Reboot your computer for the changes to take effect.
Configuration Files:
====================
Sample of configuration file:
-----------------------------
(Suppose the Lan Requester package is installed at C:\NET directory)
File Name: C:\CONFIG.SYS
----------
LASTDRIVE=Z
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\FETND\FETND.DOS
DEVICE=C:\LANMAN.DOS\DRIVERS\PROTOCOL\NETBEUI\NETBEUI.DOS
File Name: C:\AUTOEXEC.BAT
----------
(Suppose Computer name is set to AAA)
C:\LANMAN.DOS\DRIVERS\PROTMAN\NETBIND
NET START WORKSTATION AAA
File Name: C:\LANMAN.DOS\PROTOCOL.INI
----------
[PROTOCOL MANAGER]
DRIVERNAME = PROTMAN$
[NETBEUI_XIF]
Drivername = netbeui$
BINDINGS = "FETND_NIF"
[FETND_NIF]
DRIVERNAME = FETND$
Custom Keywords:
----------------
FULLDUPLEX This keyword is used to enable full
duplex mode.
(suggest use CONNECTIONTYPE instead of this keyword)
SPEED This keyword is used to force the
adapter at 10Mbps or 100Mbps speed.
(suggest use CONNECTIONTYPE instead of this keyword)
AUTO This keyword is used to force the
chip at Auto-Negotiation mode.
(suggest use CONNECTIONTYPE instead of this keyword)
CONNECTIONTYPE This keyword is used to specify duplex
and speed mode. The strings are :
AUTOSENSE
_10BaseT
_10BaseTFD
_100BaseTX
_100BaseTXFD
FLOW_CONTROL This keyword is used to specify flow contro
ability. The strings are :
HARDWARE_DEFAULT (HD)
ENABLE
DISABLE
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.