** ** ** VIA Rhine Family Fast Ethernet Adapter ** ** NDIS Driver for LANTASTIC ** ** v4.17 Jan , 2003 ** ** Introduction: ============= This document shows you how to install Lantastic NDIS driver and how to use the enhanced functions by setting the custom keywords. Contents of the Subdirectory: ============================= LANTASTI.TXT This file. FETND.DOS The NDIS2 driver. PROTOCOL.INI Sample protocol.ini file. Installation: ============= Before starting with the installation process, make sure that the adapter is properly installed and configured. You can use the diagnostic program (A:\SETUP.EXE) to make sure your connection with the network is correct. Install procedure for Lantastic 6.0 ----------------------------------- 1) Run Lantastic 6.0 install program and follow screen instructions. 2) When the "Network Adapter Setup" appears, Select "Use NDIS driver for non-Artisoft adapter" and type "A:\LANTASTI" in the search path and select "Search" button. 3) When the install program find FETND NDIS driver, select "OK" to continue. 4) Follow the screen instructions to complete the installation. 5) Restart the computer. Manual install for Lantastic 6.0/5.0 ------------------------------------ You can replace the NDIS driver by modify the following configuration files: Sample CONFIG.SYS ----------------- DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI DEVICE=C:\LANTASTI\FETND.DOS Sample STARTNET.BAT ------------------- C:\LANTASTI\AI-NDIS BIND_TO=FETND_NIF C:\LANTASTI\AILANBIO Sample PROTOCOL.INI ------------------- [PROTMAN] DRIVERNAME = PROTMAN$ DYNAMIC = YES [FETND_NIF] DRIVERNAME = FETND$ Configuration Files: ==================== You can change the configuration by modify PROTOCOL.INI file. File Name: PROTOCOL.INI ---------- Sample of configuration file: ----------------------------- ... [FETND_NIF] DRIVERNAME=FETND$ ... Custom Keywords: ---------------- FULLDUPLEX This keyword is used to enable full duplex mode. (suggest use CONNECTIONTYPE instead of this keyword) SPEED This keyword is used to force the adapter at 10Mbps or 100Mbps speed. (suggest use CONNECTIONTYPE instead of this keyword) AUTO This keyword is used to force the chip at Auto-Negotiation mode. (suggest use CONNECTIONTYPE instead of this keyword) CONNECTIONTYPE This keyword is used to specify duplex and speed mode. The strings are : AUTOSENSE _10BaseT _10BaseTFD _100BaseTX _100BaseTXFD FLOW_CONTROL This keyword is used to specify flow contro ability. The strings are : HARDWARE_DEFAULT (HD) ENABLE DISABLEDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.