1. Intel-100-Pro.zip Driver
2. LTAS60.TXT File Contents

LTAS60.TXT Driver File Contents (Intel-100-Pro.zip)

   LANtastic 6.0  

  LANtastic* installation notes for Intel's EtherExpress(TM) PRO/100 
  ISA LAN Adapter
  ==================================================================

   Location of Driver: \NDIS\E100ISA.DOS
	               \NDIS\E100ISA.NIF       
    
   GENERAL INSTALLATION
   ====================
   Run INSTALL.EXE from the LANtastic Network Software Disk 1. The LANtastic 
   Install program screen will appear. You must complete each of the 
   questions. These options are specific to your needs.

   1  Enter a unique Computer Name.

   2  Select the drive that you want LANtastic to be installed on. The 
      default is the C: drive.

   3  Specify a directory where you want the LANtastic files to be installed. 
      The default is \LANTASTI.  

   4  Select your choice for Sharing your Computers Drives or Printers.  

   5  Select the Maximum Number of Connected Computers.

   6  Select any other LANtastic features that you may want to install.

   7  A summary screen of the options you have selected will appear. If it 
      looks correct continue with the installation.

   8  You will be prompted to select a network adapter to run your LANtastic 
      software on. From the list of adapters, select 
	 
	 "NDIS SUPPORT FOR NETWORK ADAPTERS"

   9  You will be prompted to insert the manufacturers' driver diskette 
      containing the driver files. Insert the PRO/100 ISA adapter 
      driver diskette into drive A: and specify the source path 
      for driver files as
				
 	A:\NDIS 

  10  Select your Permanent Drive or Printer Connections.

  11  Another summary screen of the options you have selected will appear. 
      If this looks correct, then select Perform the Installation and 
      LANtastic will now install the program files.  

   HINTS and TIPS
   ==============
   Below are sample CONFIG.SYS, STARTNET.BAT, and PROTOCOL.INI files. 
   These are the three files with EtherExpress PRO/100 ISA adapter 
   configuration parameters.

   CONFIG.SYS: 
   -----------
   DEVICE=C:\LANTASTI\PROTMAN.DOS /I:C:\LANTASTI
   DEVICE=C:\LANTASTI\E100ISA.DOS
   FILES=100
   BFFERS=30 

   STARTNET.BAT: 
   -------------
   @echo off
   C:
   cd C:\LANTASTI
   SET LAN_CFG=C:\LANTASTI
   rem If LANtastic is disabled, skip everything.
   IF EXIST DISABLED GOTO :STARTNET_DONE
   @echo ===== Begin LANtastic configuration =====
   PATH C:\LANTASTI;C:\LANTASTI\NW;%PATH%
   SET LAN_DIR=C:\LANTASTI.NET
   SET NWDBPATH=C:\LANTASTI\NW
   LOADHIGH AI-NDIS BIND_TO=E100ISA_NIF
   AILANBIO @STARTNET.CFG
   REDIR LAB1 @STARTNET.CFG
   IF EXIST NOSHARE GOTO :NOSHARE
   SERVER C:\LANTASTI.NET @STARTNET.CFG
   NET LOGIN \\LAB1
   GOTO :CONTINUE
   :NOSHARE
   @echo LANtastic server was installed but turned off.
   :CONTINUE
   rem If CONNECT.BAT exists, run it to set up connections.
   IF EXIST CONNECT.BAT GOTO :CONNECT
   rem Otherwise set up connections specified during install.
   NET USE LPT1: \\LAB1\@PRINTER
   NET LPT TIMEOUT 10
   GOTO :CONNECT_DONE
   :CONNECT
   @echo Setting up LANtastic connections from CONNECT.BAT
   rem Build CONNECT.BAT like this: "NET SHOW/BATCH > C:\LANTASTI\CONNECT.BAT"
   rem   (or run the batch file SETNET.BAT)
   call CONNECT.BAT
   :CONNECT_DONE
   NET POSTBOX
   @echo ===== End LANtastic configuration =====
   :STARTNET_DONE
   cd \ 

  PROTOCOL.INI: 
  -------------
  ;PROTOCOL.INI for LANtastic Version 6.00
  ;------------ using the Intel EtherExpress PRO/100 NDIS 2.0.1 Driver
  ;
  [PROTMAN]
	DRIVERNAME = PROTMAN$
	DYNAMIC = YES 

  [E100ISA_NIF]
	DRIVERNAME = E100IS$

	
* Third-party trademarks are the property of their respective owners.