1. Intel-100-Pro.zip Driver
2. HWSPECS.TXT File Contents

HWSPECS.TXT Driver File Contents (Intel-100-Pro.zip)

   Hardware Specifications 

   Hardware Specifications for the EtherExpress PRO/100 ISA Adapter 
   ================================================================
     
     System Compatibility
      -------------------
      IBM-compatible PC with 80386 CPU or higher
     
      Bus Interface
      -------------
      16 bit ISA
     
      Data Transfer Method
      --------------------
      16 bit Programmed I/O
     
      Interrupt Levels
      ----------------
      3, 4, 5, 2/9, 10, 11, 12, 15
      software configurable, edge triggered
     
      I/O Address
      -----------
      15 settings, 32 byte boundries
      200h, 220h, 240h, 280h, 2A0h, 2C0h, 2E0h, 
      300h, 320h, 340h, 360h, 380h, 3A0h, 3C0h, 
      3E0h
     
      Buffer Memory
      -------------
      8K bytes
     
      Boot Rom Socket
      ---------------
      up to 32K byte, 8K byte window into Extended ROM BIOS
     
      Ethernet controller
      -------------------
      National Semi DP83800
     
      Network Connectors
      ------------------
      RJ-45
     
      Network Compatiblity
      --------------------
      IEEE 802.3   10BASE-T   (10 Mbps Ethernet over twisted pair cable) 
      IEEE 802.3u  100BASE-TX (100 Mbps Ethernet over twisted pair cable)
     
      Network Cable
      -------------
      Category 3, 4 and 5 for 10Mbps (EIA/TIA 568 wiring practices) 
      Category 5 for 100Mbps mode    (EIA/TIA 568 wiring practices) 
      100 meters (328 ft.) maximum hub to node length
    
      Network Diagnostic LEDs
      -----------------------
      Speed
      Link
      Activity
     
      Power requirements
      ------------------
      +5vdc only
      3.5 watts typical
      4.2 watts maximum
     
      Operating temperature
      ---------------------
      operating 0 - 50 degrees C
  
      Humidity
      --------
      10% - 80% non-condensing
   
      Dimensions
      ----------
      3.4 inches by 6.4 inches
   
      Certifications
      --------------
      FCC Part 15, Class A
      VDE 0871, Class B
   
      Warranty
      --------
      Limited lifetime -- see Installation Guide for details



   

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.