1. phfcwi98.exe Driver
2. MESSAGES.INI File Contents

MESSAGES.INI Driver File Contents (phfcwi98.exe)

; Messages for SETUP
; ------------------

[Normal]
N001=Do you really want to quit Solution-Pac Setup ?
N002=Interrupted setup
N003=Successfully installed
N004=Installed with Warning(s)
N005=Not installed, control error(s)
N006=Not installed, installation error(s)
N007=Can be installed
N008=Can be installed with Warning(s)
N009=Cannot be installed
N010=Configure the serial port to use
N011=Configure the serial port to use
N012=Configure IP address of agent to use
N013=Do you really want to quit Solution-Pac Setup without starting PSP ?
N014=Do you really want to quit Solution-Pac Setup without starting UM-Agent ?
N015=Do you really want to quit Solution-Pac Setup without starting UM-Client ?
N016=Do you really want to quit Solution-Pac Setup without starting UM-Console+ ?
N017=
N018.1=UM-Console+ is going to start.
N018.2=You must configure the IP address of the agent
N018.3=to supervise it with the "define" menu.
;=*****NEW MODEL>>>>>
N100= Detection of your UPS ...
N101.1=You must restart the system to start the PSP service.
N101.2=Do you want to restart the system now ?
;=<<<<<NEW MODEL*****

[Warning]
W001.1=This component is already installed in directory :
W001.2=%s
W001.3=Click "Next >" to update currently installed component.
W200.1=TCP/IP protocol is not automatically started when target computer
W200.2=starts. You will have to activate automatic start of TCP/IP
W200.3=before using this product.
W201.1=TCP/IP protocol does not seem to be active on your computer.
W201.2=Please check TCP/IP configuration.
W202.1=The file SERVICES of TCP/IP does not contain snmp/udp service.
W202.2=You will have to define port number for this service before
W202.3=using this product.
W210.1=SNMP Agent is not automatically started or not correctly started when
W210.2=target computer starts. You will have to activate correct automatic
W210.3=start of SNMP Agent before using this product.
W211.1=SNMP Agent does not seem to be active on your computer.
W211.2=Please check SNMP Agent configuration.
W212.1=ATTENTION, it's possible that there is no community name defined  
W212.2=for the native SNMP agent of your system. Pease CHECK that all is 
W212.3=correctly configured (community name read and write, ...)
W213.1=For NT 3.51 ONLY,
W213.2=SNMPTRAP.EXE executable file is not valid on your system.
W213.3=You will have to replace this file before using this product.
W214.1=Environment variables SYSCONTACT and SYSLOCATION are not
W214.2=defined and but are necessary for SNMP Agent.
W214.3=You will have to define these variables before 
W214.4=using this product.
W215=This IPX address is invalid.

[Error]
E001=Incorrect directory or drive.
E002=Unable to read file : 
E003=Unable to find description file.
E004=Unknown component.
E005=Invalid control description.
E006=Error copying file (error %d).
E007.1=This software is running. 
E007.2=You must stop all its modules before the update.
E010=Unable to create path file.
E011=Unable to install automatic start.
E012=Unable to create command file UMA.
E013=Unable to create proxy-agents.
E014=Unable to register uninstall program.
E015=Unable to create command file UMC.
E020=Unable to start the configuration program of this product.
E021=Unable to start this component.
E022=Unable to modify SP_APP.INI file.
E023=Unable to modify SP.INI file.
E100=Insufficient disk space for selected components installation.
E101.1=This disk is not a "System Disk" or you dont have the rights
E101.2=to install this product on this disk.
E102=This product cannot be installed on a remote disk.
E110=You don't have the rights required to install selected components.
E200.1=TCP/IP protocol is not installed on target computer.
E200.2=You must install this protocol before continuing setup.
E210.1=SNMP agent is not installed on target computer.
E210.2=You must install this software before continuing setup.
E220.1=Setup is going to stop : Windows 98 drivers uninstall failed.
E220.2=Uninstall its manually and invoke Setup again.
E230.1=Setup has detected UM-Agent on your system.
E230.2=You must uninstall UM-Agent with the Uninstal
E230.3=program.
E230.4=
E230.5=Attention, if you uninstall it, client workstations
E230.6=will not protected.
E240.1=Setup has detected PSP on your system.
E240.2=You must uninstall PSP with the Uninstal
E240.3=program.
E260.1=Setup has detected UM-Server on your system.
E260.2=You must uninstall UM-Server with the Uninstal
E260.3=program.
E260.4=
E260.5=Attention, if you uninstall it, client workstations
E260.6=will not protected.
E270.1=Setup has detected UM-Server on your system.
E270.2=You must uninstall UM-Server with the Uninstal
E270.3=program or install UM-Agent on another system.
E300.1=Unsufficient previliges to run the program.
E300.2=Ask your system administrator for futher details.
;=*****NEW MODEL>>>>>
E301.1=No UPS detected.
E301.2=Check the connection of your UPS.
E302=The Windows Agent doesn't work with your UPS.
E303=Unable to write install path in registry base.
;<<<***ECL-281299***
E304.1=The USB version of PSP can't be installed on your system.
E304.2=Your USB UPS is completely monitoring by your operating system.
;***ECL-281299***>>>
E350.1=Setup has detected a version of PSP
E350.2=that is not compatible with your UPS.
E350.3=You must uninstall it with the Uninstal program.
E351.1=%s is running. You must uninstall it
E351.2=to allow the detection of your UPS.
E352=Unable to save the files names for uninstal.
E355=Unable to restart the system. You must do it yourself.
;=<<<<<NEW MODEL*****