; Labels for SETUP ; ---------------- [W_Setup] T_Title=Solution-Pac Setup T_For=for [M_Box] T_Normal=Solution-Pac Setup T_Error=Error ! T_Quick=Solution-Pac T_Full=Solution-Pac / WAN [D_Language] T_Title=Welcome ! T_Welcome.1=Welcome to Solution-Pac Setup Program T_Welcome.2=and thank you for purchasing MGE UPS SYSTEMS products. B_Next=&Next > B_Quit=&Quit [D_Type] T_Title=Solution-Pac Setup type B_Quick=Personal Solution-Pac T_QuickLib=for Microsoft operating systems and NOVELL T_Quick.1=Personal Solution-Pac (PSP) is best, and easiest, for the individual user whose T_Quick.2=§ computer and MGE UPS are "one-on-one" with each other, and T_Quick.3=§ no additional network distributed protection or remote monitoring T_Quick.4=§ is required. Just follow the installation Wizard screens ! T_UnavailableQ=This choice is not available for this media. B_DetailsQ=&Details... B_Full=Solution-Pac/WAN (SNMP agent, client && manager modules w/UDP on IP) T_FullLib=for Microsoft operating systems, NOVELL and OS/2 T_Full.1=Solution-Pac / WAN (SPW) is recommended for installation only by your network T_Full.2=§ specialist. Your network specialist will have the requisite T_Full.3=§ information about your particular network (such as IP address) T_Full.4=§ to quickly step through the installation screens. Refer to the SPW T_Full.5=§ documentation and installation notes in the CD-ROM, and follow T_Full.6=§ the on-screen instructions. T_UnavailableF=This choice is not available for this media. B_DetailsF=D&etails... B_Previous=< &Previous B_Next=&Next > B_Help=&Help... B_Quit=&Quit [D_Quick] T_Title=Solution-Pac Operating System Selection T_Target= T_Directory=Installation directory C_Jericho=Pager, Email,... option B_Jericho=&Details... T_Space=Disk space T_Help.1=Choose your operating system, system drive and T_Help.2=directory for installation. T_Help.3= B_Previous=< &Previous B_Next=&Next > B_Help=&Help... B_Quit=&Quit T_Req=Required : T_Ko=Ko T_Ava=Available : [D_Full] T_Title=Solution-Pac / WAN Components and Operating System Selection T_Component=Component T_Target=Operating system T_Directory=Installation directory C_Comm=Communication with UPS B_Comm=&Details... T_Comm.1=UM-Agent is designed for any computer T_Comm.2=connected to the UPS by means of a serial link. C_Prot=System protection B_Prot=D&etails... T_Prot.1=UM-Client is designed for any computer over T_Prot.2=the network which is powered by the UPS. C_Mgmt=MGE UPS Sytems equipment management B_Mgmt=De&tails... T_Mgmt.1=The manager is designed for any Network T_Mgmt.2=Manager's workstation. C_Jericho=Pager, Email,... option B_Jericho=Detai&ls... T_Space=Disk space T_Help.1=Choose the desired component(s). T_Help.2=For each of them, choose the operating system, the appropriate system drive and directory for installation. B_Previous=< &Previous B_Next=&Next > B_Help=&Help... B_Quit=&Quit T_Req=Required : T_Ko=Ko T_Ava=Available : [D_Overview] T_Title=Details B_Ok=&OK [D_Warning] T_TitleQ=Solution-Pac Installation warning T_TitleF=Solution-Pac / WAN Installation warning T_Product=Component : T_Details=You will find more details in the following file on CD-ROM: B_Quick=< &Setup type B_Previous=< &Previous B_Next=&Next > B_Quit=&Quit B_Previous2=&Uninstall B_Next2=&Cancel [D_CError] T_TitleQ=Solution-Pac Installation error T_TitleF=Solution-Pac / WAN Installation error T_Product=Component : T_Details=You will find more details in the following file on CD-ROM: B_Quick=< &Setup type B_Previous=< &Previous B_Quit=&Quit [D_IError] T_TitleQ=Solution-Pac Installation error T_TitleF=Solution-Pac / WAN Installation error T_Product=Component : T_Message=Installation of component is aborted. B_Continue=&Continue > [D_Progress] T_TitleQ=Solution-Pac Installation T_TitleF=Solution-Pac / WAN Installation T_Product=Component : T_Copy=Copying file : B_Quit=&Quit [D_Report] T_Title=Installation report T_Report=Installation report of selected products T_ProductR=Component T_Target=Operating System T_Directory=Installation directory T_Status=Status T_Message1=UM-AGENT : YOU MUST CONFIGURE THE SERIAL PORT T_Message2=UM-CLIENT : YOU MUST CONFIGURE THE IP ADDRESS OF THE USED AGENT T_ReportFile=You can find detailed Installation report in the following log file : B_Quit=&Quit B_Next=&Next B_Install=&Other installation... [D_PspReport] T_Title=Installation report T_Message1=The following product has been installed : T_Product=Product : T_Target=Target : T_Directory=Directory : T_State=State : T_Message2=YOU MUST CONFIGURE THE SERIAL PORT. T_ReportFile=You can find detailed Installation report in the following log file : B_Quit=&Quit B_Next=&Next > B_Install=&Other installation [D_PspStart] T_Title=PSP startup T_Message.1= T_Message.2=Solution Pac is ready to run. B_Start=&Start B_Quit=&Quit T_ComStart.1= T_ComStart.2=Communication module is starting T_ComStart.3=Please wait. T_MonStart.1= T_MonStart.2=Protection module is starting T_MonStart.3=Please wait. [D_PspNW] T_Title=PSP for NetWare startup T_Message1.1=Go to the server and type the following commands : T_Message1.2=LOAD SYS:UPSMAN/PSP/PSP.NLM -STOP ALL (To stop PSP if needed ) T_Commands.1=LOAD SYS:UPSMAN/PSP/PSP.NLM -START COM MON SPNW T_Commands.2=LOAD SYS:UPSMAN/PSP/GIPXADDR T_Message2.1=Note the IPX address given to you by gipxaddr. T_Message2.2= T_Message2.3=When you've done, come back and hit OK. B_OK=&OK B_Quit=&Quit [D_SpWanNW] T_Title=SP/WAN for NetWare startup T_Message1=Go to the server and type the following commands : T_Commands.1=LOAD SYS:UPSMAN/UMAGENT/UMA -S T_Commands.2=LOAD SYS:UPSMAN/UMCLIENT/UMC -S T_Message2.1= T_Message2.2=When you've done, come back and hit OK. T_Message2.3= B_OK=&OK B_Quit=&Quit [D_GetIpx] T_Title=supervisor's configuration (PSP-Console+) for Netware T_Message.1=Enter the Netware server IPX address. T_Note.1=Reminder : you can obtain the IPX address by executing the command T_Note.2= LOAD SYS:UPSMAN/PSP/GIPXADDR T_Note.3=on the Novelle server. B_Start=&Start B_Quit=&Quit [D_Info] T_Title=Information about the installation T_Message.1=Prior to attempting installation of Solution-Pac power protection software, the MGE UPS must already be T_Message.2=§ powering and serially connected (through RS232 or USB) with the computer upon which you whish to T_Message.3=install this software. T_Message.4=The steps for connecting the computer and MGE UPS are described in the booklet included in the Solution-Pac T_Message.5=§ CD-ROM case. T_Message.6=The same information is also available choosing "Documentation" in the T_Message.7=§ Navigator screen. T_Message.8= T_Message.9=If you have NOT yet connected the computer and the MGE UPS, T_Message.10=§ please select "Quit" and follow the steps for connecting them. T_Message.11= T_Message.12=After you have completed the steps for connecting your computer and MGE UPS, please select "Next" to T_Message.13=§ continue the installation of Solution-Pac power protection software. B_Previous=< &Previous B_Next=&Next > B_Help=&Help... B_Quit=&Quit [D_SpWanStart] T_Title=SP/WAN startup B_Start=&Start B_Quit=&Quit T_ComStart.1= T_ComStart.2=Communication module is starting T_ComStart.3=Please wait. T_ProStart.1= T_ProStart.2=Protection module is starting T_ProStart.3=Please wait. T_Message_Com.1= T_Message_Com.2=UM-Agent is ready to start T_Message_Pro.1= T_Message_Pro.2=UM-Client is ready to start T_Message_Man.1= T_Message_Man.2=UM-Console+ is ready to start [D_SpWanOS2] T_Title=SP/WAN startup for OS2 T_Message1.1=Please start the installed components in an OS2 session. T_Message1.2=It's recommended to launch them as job using DETACH T_Message1.3=before the following commands T_Command1=\UMA.CMD -N T_Command2=\UMC.EXE -S T_Message2.1= T_Message2.2=When you've done, come back and hit OK. B_OK=&OK B_Quit=&Quit [F_Log] T_DateTime=%m/%d/%Y %H:%MDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.