EtherWORKS Packet Driver V1.04 ============================== EWRK3.COM is a packet driver for the EtherWORKS 3 cards: (DE203, DE204 and DE205). The driver can be invoked using the following command: ewrk3 <Software Interrupt> Where <Software Interrupt> is a hex number from 60-80(inclusive). Normally software interrupt vector 60 can be used(e.g. ewrk3 60) or (e.g. ewrk3 0x60) *NOTE*: Be careful when choosing a software interrupt vector as not to use one that is in use by another program. The following should be avoided: o 0x67 can be used by EMS Memory manager functions o 0x70 - 0x77 can be used to access IRQ's 8 - 15 After this command is invoked the EtherWORKS 3 packet driver will search for the EtherWORKS 3 card and(if successful) load itself as a TSR. Your Packet Driver application can now be invoked. In rare cases some systems can be sensitive to this scanning. If so there is an OPTIONAL command for manually specifying the IOPORT address as follows: ewrk3 60 i:3a0 Also 2K Memory mode is recommended to provide optimum performance and memory savings. Use of multiple cards in a PC are supported. Please note that subsequent card settings CANNOT match other EtherWORKS 3 cards in your PC. If you are having problems make sure: o The Software Interrupt vector does not match one that is already loaded. o With the second invocation of the driver you use the i: switch to specify the IOPORT ADDRESS of the second card. o That cards are configured such that their configurations do NOT matches or overlap(IRQ, MEMORY ADDRESS, IOPORT ADDRESS). Fixes in V1.05: --------------- - Fix timing issue (upon initial loading of driver) with certain PC's Previous fixes: --------------- V1.03 -> Updated EEPROM Timer routine when reading/writing the EEPROM. V1.02 -> Support for loading multiple copies of the driver on multiple V1.04 -> Make driver Y2K (year 2000 safe). Fix bug when in Promiscuous mode. boards in a PC.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.