MSP3880SP-U/W/A Data/Fax/Voice/Speakerphone 56K Modem
IMPORTANT NOTES
===============
The Diagnostic Program that came with this installation CD can only
work in Windows 98.
A. FEATURES.
B. WINDOWS 98 INSTALLATION.
C. WINDOWS 95 OSR2 INSTALLATION.
D. WINDOWS 95 & WINDOWS 95 SR1 INSTALLATION.
E. WINDOWS NT4.0 INSTALLATION.
F. WINDOWS 2000 INSTALLATION.
G. HOW TO INSTALL FAX IN WINDOWS 98 ?
H. WINDOWS 98 RELATED ISSUE.
I. HOW TO UNINSTALL MODEM ?
-------------------------------------------------------------------------------------
A. FEATURES
============
1. This product is compatible to any Windows 95 platform. It is not meant
for Windows 3.x and DOS platform.
2. Silent Detection is currently not supported in this release.
3. Windows DOS Terminal Emulation is supported. Due to the PCI way of
assigning IRQ to the Modem, please do not use old DOS applications in
WINDOWS 95 DOS Emulation Box. Try to use Up-To-Date DOS applications
such as PROCOMM PLUS - Version 2.0 etc. To setup DOS Box support,
please check the DOS Support Box under Modem Properties for this
feature.
4. The modem diagnostic that came with the installation CD can only
work in Windows 98.
-------------------------------------------------------------------------------------
B. WINDOWS 98 INSTALLATION
===========================
Installation of modem drivers in Windows 98 is similar to Win95. Note that
Unimodem Drivers are not required for Windows 98.
1. Windows 98 will automatically detect "PCI Comunication Devices". Click
"Next" to continue. "PCI Communication Devices" will be prompted by
all MSP3880.
2. Insert the MSP3880 Modem Installation CD provided into the CD ROM
Drive.
3. Select "Search for the best drivers for your device. (Recommended)" and
click "Next" to continue.
4. Enable "Specify a Location" selection and type in "D:\Win9x" (assuming
D: the CD ROM Drive) , click "Next" to continue.
5. Modem Driver will be found on the MSP3880 Installation CD.
Click "Next" to continue.
6. Click "Finish" to complete modem installation.
7. System will then automatically load all the necessary drivers and files
needed.
-------------------------------------------------------------------------------------
C. WINDOWS 95 OSR2 INSTALLATION
================================
1. Windows 95 will automatically detect "PCI Communication Devices".
Click "Next" to continue in the "Upgrade Driver Wizard" dialog box.
"PCI Communication Devices" will be prompted by the MSP3880 modem.
2. Insert the MSP3880 Installation Disk provided into the Floppy Drive.
3. Click "Next" and the system will search for an updated driver.
4. Click "Finish" to use the updated driver.
5. Click "Ok" when prompted to insert the installation CD.
6. Change path to D:\Win9x (assuming the CD Drive is at D:) and click OK.
7. System will then automatically load all the necessary drivers and files
needed.
8. Please reboot the system if prompted.
-------------------------------------------------------------------------------------
D. WINDOWS 95 & WINDOWS 95 SR1 INSTALLATION
============================================
1. Windows 95 will automatically detect the PCI Modem and displays the
"New Hardware Found" dialog box.
2. Insert the MSP3880 Installation CD provided into the CD ROM Drive.
3. Select the "Driver from disk provided by Hardware manufacturer option"
and click OK.
4. Type the path to the Drive, eg. "D:\Win9x" (where your CD Drive is
assigned) in the combo box and click OK.
After loading the PCI modem device, if you encounter resource conflicts
(especially when there are non-Plug & Play adaptors installed in your
system), please follow the steps below to alter the resource
configuration :
1. Go to Control Panel - System - Device Manager and click on "Modem".
2. Choose the modem device and click on "Properties". You can change
the settings to resolve the conflict device.
For further details, please refer to Trouble-shooting section in
Windows 95.
-------------------------------------------------------------------------------------
E. WINDOWS NT4.0 INSTALLATION
==============================
1. Start Windows NT 4.0.
2. Insert the Installation CD into the CD ROM Drive.
3. Type "D:\Winnt40\*\setup.exe" in the RUN option.(where "*" the model of the modem)
4. Follow any on-screen instructions to complete the software installation.
5. Restart your system after the installation.
-------------------------------------------------------------------------------------
F. WINDOWS 2000 INSTALLATION
==============================
1. Windows 2000 will automatically detect "PCI Simple Communications
Controller". Click "Next" to continue.
2. Insert the MSP3880 Installation CD provided into the CD ROM Drive.
3. Select "Search for a suitable driver for your device. (Recommended)"
and click "Next" to continue.
4. Enable "Specify a Location" selection and type in "D:\win2000"
assuming D: the CDROM Drive,then click "Next" to continue.
5. Modem Driver will be found on the MSP3880 Installation CD. Click
"Next" to continue.
6. Click "Finish" to complete modem installation.
7. System will then automatically load all the necessary drivers and files
needed.
-------------------------------------------------------------------------------------
G. How to install Microsoft Fax in Windows 98?
===============================================
If you are staying in US, go to directory D:\Tools\oldwin95\message\us in
Windows 98 installation CD. For other countries, go to
D:\Tools\oldwin95\message\intl
1. First run wms.exe under the directory to install Microsoft Messaging.
2. Next run awfax.exe under the same directory to install Microsoft Fax.
For further information on Microsoft Messaging and Microsoft Fax, read
wms-fax.txt under the same directory in Windows 98 CD.
-------------------------------------------------------------------------------------
H. WINDOWS 98 RELATED ISSUE.
=============================
User may encounter problem such as modem cannot dial out under Windows 98.
Please close all modem applications and restart the Windows. Make sure you
have connected the Phone Line before re-running the application again.
-------------------------------------------------------------------------------------
I. HOW TO UNINSTALL MODEM?
===========================
For Windows 9X and NT4.0, product is installed with Uninstall Program
allowing user to remove modem completely from the system. To perform an
un-installation, proceed to Control Panel / Add/Remove Program icon.
To complete, for Windows 9x and Windows NT4 you need to remove the
"MSP3880SP-U/W/A Modem" and "MSP3880SP-U/W/A Modem Files".
For Windows 2000, proceed to the Device Manager. Choose the "MSP3880SP-U/W/A
Modem", right click on the mouse and select uninstall. Then go to
Control Panel / Add/Remove Program icon and remove the "MSP3880SP-U/W/A Modem Files".
------- The End ---------
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.