;********************************************************************
;
; The Cardbus WLAN miniport driver oemsetup file
; for WinNT 3.5x, WinNT 4.0
; (NDIS 4.0 driver)
;
;********************************************************************
[Identification]
OptionType = NetAdapter
[PlatformsSupported]
ISA
EISA
PCMCIA
[LanguagesSupported]
ENG
[Options]
RTL8180
[OptionsTextENG]
RTL8180 = "Realtek RTL8180 CardBus WLAN Adapter"
[Source Media Descriptions]
1 = "Realtek RTL8180 CardBus WLAN Adapter Device Driver Diskette"
[Files-Sys]
1,RTL8180.sys, SIZE=40000
[Files-Inf]
1, oemsetup.inf, SIZE=40000, RENAME=$(!UG_Filename)
[date]
Now = {} ? $(!LIBHANDLE) GetSystemDate
[FileConstants]
UtilityInf = "UTILITY.INF"
ParamInf = "NCPARAM.INF"
SubroutnInf = "SUBROUTN.INF"
SoftwareType = "driver"
NetEventDLL = "%SystemRoot%\System32\netevent.dll;%SystemRoot%\System32\Drivers\RTL8180.sys"
Manufacturer = "RealTek"
ProductMajorVersion = "4"
ProductMinorVersion = "31"
ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion)
ProductSoftwareName = "RTL8180"
ProductSoftwareImagePath = "%SystemRoot%\System32\drivers\RTL8180.sys"
NetRuleSoftwareType = "RTL8180Sys ndisDriver RTL8180Driver"
NetRuleSoftwareUse = $(SoftwareType)
NetRuleSoftwareBindForm = """RTL8180Sys"" yes no container"
NetRuleSoftwareClass = {"RTL8180Driver basic"}
NetRuleSoftwareBindable = {"RTL8180Driver RTL8180Adapter non exclusive 100"}
ProductHardwareName = "RTL8180"
NetRuleHardwareType = "RTL8180 RTL8180Adapter"
NetRuleHardwareBindForm = " yes yes container"
NetRuleHardwareClass = {"RTL8180Adapter basic"}
ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion"
ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters"
ProductSoftwareDescription = "Realtek RTL8180 CardBus WLAN Adapter Driver"
ProductSoftwareTitle = "Realtek RTL8180 CardBus WLAN Adapter Driver"
ProductHardwareDescription = "Realtek RTL8180 CardBus WLAN Adapter"
ProductHardwareTitle = "Realtek RTL8180 CardBus WLAN Adapter"
AdapterType = 5 ;; PCI board
VendorID = 4332 ;; 0x10EC
CFID = 2172653804 ;; 0x818010EC
[PcmciaKeys]
CardManufacturer = "Realtek" ;; Manufactutre Name
CardKeyName = "Rtl8180" ;; Product Name
PcmciaPath = $(!NTN_ServiceBase)"\Pcmcia\DataBase"
PcmciaManufacturePath = $(!NTN_ServiceBase)"\Pcmcia\DataBase\"$(CardManufacturer)
PcmciaProductPath = $(!NTN_ServiceBase)"\Pcmcia\DataBase\"$(CardManufacturer)"\"$(CardKeyName)
PcmciaRMKeyName = $(!NTN_ServiceBase)"\resman"
PcmciaRMDBKeyName = $(!NTN_ServiceBase)"\resman\MacDataBase"
[GeneralConstants]
from = ""
to = ""
ExitCodeOk = 0
ExitCodeCancel = 1
ExitCodeFatal = 2
KeyNull = ""
MAXIMUM_ALLOWED = 33554432
RegistryErrorIndex = NO_ERROR
KeyProduct = ""
KeyParameters = ""
TRUE = 1
FALSE = 0
PcmciaKey = ""
PcmciaManufactureKey = ""
PcmciaProductKey = ""
NoTitle = 0
ExitState = "Active"
OldVersionExisted = FALSE
DriverPath = $(!STF_NTPATH)\drivers
[FileConstantsENG]
ProCaption = "Windows NT Setup"
ProCancel = "Cancel"
ProCancelMsg = "Windows NT Networking is not correctly installed. "+
"Are you sure you want to cancel copying files?"
ProCancelCap = "Network Setup Message"
ProText1 = "Copying:"
ProText2 = "To:"
FunctionTitle = "Realtek RTL8180 CardBus WLAN Adapter Setup"
ChannelList = ^(ChannelDlg, 1)
ChannelValues = ^(ChannelDlg, 2)
NetworkTypeList = ^(NetworkTypeDlg, 1)
NetworkTypeValues = ^(NetworkTypeDlg, 2)
IRQList = ^(IRQChoicesDlg, 1)
IRQLevels = ^(IRQChoicesDlg, 2)
IOBaseList = ^(IOBaseAddrChoicesDlg, 1)
IOBaseValues = ^(IOBaseAddrChoicesDlg, 2)
MemAddrList = ^(MemoryAddrChoicesDlg, 1)
MemAddrValues = ^(MemoryAddrChoicesDlg, 2)
NoList = ^(NoChoices, 1)
NoValues = ^(NoChoices, 2)
ShellCodeErrorTitle = "Error: "$(Function$(Option)Title)
ShellCodeErrorText = "Shell Code Error."
CANNOT_FIND_ANY_CARD = "Network card is not present in the system"
[HexDigits]
Hex0 = 0
Hex1 = 1
Hex2 = 2
Hex3 = 3
Hex4 = 4
Hex5 = 5
Hex6 = 6
Hex7 = 7
Hex8 = 8
Hex9 = 9
HexA = A
HexB = B
HexC = C
HexD = D
HexE = E
HexF = F
[IRQChoicesDlg]
IRQ0 = "3",3
IRQ1 = "4",4
IRQ2 = "5",5
IRQ3 = "7",7
IRQ4 = "9",9
IRQ5 = "10",10
IRQ6 = "11",11
IRQ7 = "12",12
IRQ8 = "15",15
[IOBaseAddrChoicesDlg]
IOBase_1 = "0x1000",4096
IOBase_2 = "0x1800",6144
IOBase_3 = "0x2000",8192
IOBase_4 = "0x2800",10240
IOBase_5 = "0x3000",12288
IOBase_6 = "0x3800",14336
IOBase_7 = "0x4000",16384
IOBase_8 = "0x4800",18432
IOBase_9 = "0x5000",20480
IOBase_10 = "0x5800",22528
IOBase_11 = "0x6000",24576
IOBase_12 = "0x6800",26624
IOBase_13 = "0x7000",28672
IOBase_14 = "0x7800",30720
IOBase_15 = "0x8000",32768
IOBase_16 = "0x8800",34816
IOBase_17 = "0x9000",36864
IOBase_18 = "0x9800",38912
IOBase_19 = "0xA000",40960
IOBase_20 = "0xA800",43008
IOBase_21 = "0xB000",45056
IOBase_22 = "0xB800",47104
IOBase_23 = "0xC000",49152
IOBase_24 = "0xC800",51200
IOBase_25 = "0xD000",53248
IOBase_26 = "0xD800",55296
IOBase_27 = "0xE000",57344
IOBase_28 = "0xE800",59392
IOBase_29 = "0xF000",61440
IOBase_30 = "0xF800",63488
[MemoryAddrChoicesDlg]
MA_1 = "0xC8000", 819200
MA_2 = "0xC9000", 823296
MA_3 = "0xCA000", 827392
MA_4 = "0xCB000", 831488
MA_5 = "0xCC000", 835584
MA_6 = "0xCD000", 839680
MA_7 = "0xCE000", 843776
MA_8 = "0xCF000", 847872
MA_9 = "0xD0000", 851968
MA_10 = "0xD1000", 856064
MA_11 = "0xD2000", 860160
MA_12 = "0xD3000", 864256
MA_13 = "0xD4000", 868352
MA_14 = "0xD5000", 872448
MA_15 = "0xD6000", 876544
MA_16 = "0xD7000", 880640
MA_17 = "0xD8000", 884736
MA_18 = "0xD9000", 888832
MA_19 = "0xDA000", 892928
MA_20 = "0xDB000", 897024
MA_21 = "0xDC000", 901120
MA_22 = "0xDD000", 905216
MA_23 = "0xDE000", 909312
MA_24 = "0xDF000", 913408
[NetworkTypeDlg]
NetworkType_1 = "0", 0
NetworkType_2 = "1", 1
[ChannelDlg]
Channel_01 = "1", 1
Channel_02 = "2", 2
Channel_03 = "3", 3
Channel_04 = "4", 4
Channel_05 = "5", 5
Channel_06 = "6", 6
Channel_07 = "7", 7
Channel_08 = "8", 8
Channel_09 = "9", 9
Channel_10 = "10", 10
Channel_11 = "11", 11
;; Channel_12 = "12", 12
;; Channel_13 = "13", 13
;; Channel_14 = "14", 14
[DialogConstantsENG]
Help = "&Help"
Exit = "Cancel"
OK = "OK"
HelpContext = ""
Continue = "Continue"
Cancel = "Cancel"
[Identify]
read-syms Identification
shell "" DebugControl
set Status = STATUS_SUCCESSFUL
set Identifier = $(OptionType)
set Media = #("Source Media Descriptions", 1, 1)
Return $(Status) $(Identifier) $(Media)
[ReturnOptions]
shell "" DebugControl
set OptionList = ^(Options, 1)
set OptionTextList = ^(OptionsText$($0), 1)
set Status = STATUS_SUCCESSFUL
set LanguageList = ^(LanguagesSupported, 1)
Ifcontains(i) $($0) in $(LanguageList)
ifstr(i) $($0) == ""
set Status = STATUS_NOLANGUAGE
goto ExitReturnOptions
endif
else
set Status = STATUS_NOLANGUAGE
goto ExitReturnOptions
endif
set PlatformList = ^(PlatformsSupported, 1)
Ifcontains(i) $($1) NOT-IN $(PlatformList)
ifstr(i) $($1) != ""
set Status = STATUS_NOTSUPPORTED
endif
endif
ExitReturnOptions = +
Return $(Status) $(OptionList) $(OptionTextList)
[InstallOption]
set Option = $($1)
set SrcDir = $($2)
set AddCopy = $($3)
set DoCopy = $($4)
set DoConfig = $($5)
read-syms GeneralConstants
read-syms FileConstants
read-syms DialogConstants$(!STF_LANGUAGE)
read-syms FileConstants$(!STF_LANGUAGE)
shell "" DebugControl
StartWait
set LanguageList = ^(LanguagesSupported, 1)
Ifstr(i) $(!NTN_InstallMode) == deinstall
set SubFunction = RemoveAdapter
else-Ifstr(i) $(!NTN_InstallMode) == install
set SubFunction = InstallAdapter
else-Ifstr(i) $(!NTN_InstallMode) == update
set SubFunction = UpgradeSoftware
else-Ifstr(i) $(!NTN_InstallMode) == configure
set SubFunction = ConfigureAdapter
else
set SubFunction = NoWay
endif
Shell "" $(SubFunction)
EndWait
return $($R0)
[InstallAdapter]
read-syms GeneralConstants
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
read-syms DialogConstants$(!STF_LANGUAGE)
detect date
set CurrentTime = *($(Now),1)
set SrcDir = $(!p:SrcDir)
set Option = $(!p:Option)
set DoCopy = $(!p:DoCopy)
set AddCopy = $(!p:AddCopy)
set KeyProduct = $(KeyNull)
set DoSetup = TRUE
set OldVersionExisted = FALSE
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
ifstr(i) $(!NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle), +
$(ProductVersion)
ifstr(i) $($R1) != "OK"
Return STATUS_FAILED
endif
else
Shell $(UtilityInf), CardExistedDlg
ifstr(i) $($R1) != "OK"
Return STATUS_FAILED
endif
set OldVersionExisted = TRUE
endif
endif
IfStr(i) $(DoSetup) == TRUE
ifstr(i) $(DoCopy) == "YES"
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) != $(KeyNull)
CloseRegKey $(KeyProduct)
else
set BuiltIn = "YES"
ifstr(i) $(!NTN_Origination) == "NCPA"
Set BuiltIn = "NO"
endif
Shell $(UtilityInf) DoAskSource $(!STF_CWDDIR) $(SrcDir) $(BuiltIn)
set SrcDir = $($R1)
endif
endif
dowind =+
Set !p:EtherID = ""
Set !p:NetworkAddress = "000000000000"
set !p:IRQIndex = 11
Set !p:SSID = "ANY"
Set !p:ChannelIndex = 1
Set !p:NetworkTypeIndex = 1
set !p:IOBaseValue = 4096 ;; 0x1000
set !p:MemAddrValue = 884736 ;; 0xD8000
set !p:ChannelValue = *($(ChannelList), ~($(ChannelValues),$(!p:ChannelIndex)))
ifstr(i) $(!p:ChannelValue) == ""
set !p:ChannelValue = *($(ChannelList), 1)
endif
set !p:NetworkTypeValue = *($(NetworkTypeList), ~($(NetworkTypeValues),$(!p:NetworkTypeIndex)))
ifstr(i) $(!p:NetworkTypeValue) == ""
set !p:NetworkTypeValue = *($(NetworkTypeList), 1)
endif
set !p:IRQLevel = *($(IRQList), ~($(IRQLevels),$(!p:IRQIndex)))
ifstr(i) $(!p:IRQLevel) == ""
set !p:IRQLevel = *($(IRQList), 11)
endif
;;; Shell "" AdapterSetup
set AdapterStatus = FALSE
set NotifyFields = {NO, NO, NO, NO}
;;; set EditTextIn = $(!p:SSID)
;;; set EditTextLim = 50
;;; set EditFocusOn = "ALL"
read-syms ResourcesDlg$(!STF_LANGUAGE)
set Combo1Out = $(!p:IRQIndex)
set-dectohex Combo2Out = $(!p:IOBaseValue)
set-dectohex Combo3Out = $(!p:MemAddrValue)
ui start "Config"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set !p:IRQIndex = $(Combo1Out)
set-hextodec !p:IOBaseValue = $(Combo2Out)
set-hextodec !p:MemAddrValue = $(Combo3Out)
set !p:IOBaseIndex = $(Combo2Out)
set !p:MemAddrIndex = $(Combo3Out)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set AdapterStatus = STATUS_USERCANCEL
Debug-Output "$(InfFile) $(Option): User Cancel"
ui pop 1
goto end
else
ui pop 1
goto end
endif
read-syms WLANDlg$(!STF_LANGUAGE)
set Combo1Out = $(!p:NetworkTypeIndex)
set Combo2Out = $(!p:ChannelIndex)
set EditTextIn = $(!p:SSID)
;;; ui start "InputDlg"
ui start "System"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set !p:NetworkTypeIndex = $(Combo1Out)
set !p:ChannelIndex = $(Combo2Out)
Set !p:SSID = $(EditTextOut)
set AdapterStatus = TRUE
Debug-Output "$(InfFile) $(Option): User Continue"
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set AdapterStatus = STATUS_USERCANCEL
Debug-Output "$(InfFile) $(Option): User Cancel"
ui pop 1
goto end
else
ui pop 1
goto end
endif
set !p:IRQLevel = *($(IRQLevels), ~($(IRQList),$(!p:IRQIndex)))
set !p:NetworkTypeValue = *($(NetworkTypeValues), ~($(NetworkTypeList),$(!p:NetworkTypeIndex)))
set !p:ChannelValue = *($(ChannelValues), ~($(ChannelList),$(!p:ChannelIndex)))
ifstr(i) $(DLGEVENT) == "CONTINUE"
IfStr(i) $(!STF_NCDETINFO) == {}
Set !p:BusType = 0
Set !p:BusNumber = 0
Else
Set !p:BusType = *($(!STF_NCDETINFO),5)
Set !p:BusNumber = *($(!STF_NCDETINFO),6)
EndIf
Endif
end = +
;;; return $(AdapterStatus)
ifstr(i) $(AdapterStatus) == STATUS_USERCANCEL
Debug-Output "$(InfFile) $(Option): InstallAdapter STATUS_USERCANCEL"
Return STATUS_USERCANCEL
endif
;;; IfStr(i) $($R0) != TRUE
;;; Return STATUS_USERCANCEL
;;; endif
IfStr(i) $(OldVersionExisted) == FALSE
Debug-Output "$(InfFile) $(Option): OldVersionExisted FALSE"
Shell "" SetCopy $(DoCopy) $(AddCopy) $(SrcDir) "Install-Option"
IfStr(i) $($R0) == TRUE
Shell "" SetSoftware $(CurrentTime)
Debug-Output "$(InfFile) $(Option): SetSoftware"
IfStr(i) $($R0) != TRUE
Return STATUS_FAILED
endif
endif
endif
Shell "" SetHardware $(CurrentTime)
Debug-Output "$(InfFile) $(Option): SetHardware"
IfStr(i) $($R0) == TRUE
;;; Shell "" WriteParameters
Set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(!p:BusType)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(!p:BusNumber)},+
{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(!p:AdapterType)},+
;; {CardType,$(NoTitle),$(!REG_VT_DWORD),2},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(!p:CFID)},+
{IOBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(!p:IOBaseValue)},+
{MemoryBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(!p:MemAddrValue)},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(!p:IRQLevel)},+
{Channel,$(NoTitle),$(!REG_VT_DWORD),$(!p:ChannelValue)},+
{SSID,$(NoTitle),$(!REG_VT_SZ),$(!p:SSID)},+
{NetworkType,$(NoTitle),$(!REG_VT_DWORD),$(!p:NetworkTypeValue)},+
;; {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
{EarlyTxThreshold,$(NoTitle),$(!REG_VT_DWORD),$(!p:EarlyTxThreshold) },+
{ChipOnCardbus,$(NoTitle),$(!REG_VT_DWORD),1},+
{TxMaxDMABurst,$(NoTitle),$(!REG_VT_DWORD),6},+
{RxMaxDMABurst,$(NoTitle),$(!REG_VT_DWORD),6},+
{TxInterFrameGap,$(NoTitle),$(!REG_VT_DWORD),3},+
{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),0}}
Shell $(UtilityInf), AddValueList, $(!KeyParameters), $(NewValueList)
Set Status = $($R0)
Shell "" SetUpPcmcia
CloseRegKey $(!KeyParameters)
Ifstr(i) $(Status) != NO_ERROR
Shell $(UtilityInf) RegistryErrorString $(Status)
Shell "" ShellError $($R0)
set AdapterStatus = FALSE
;;; Return FALSE
endif
set AdapterStatus = TRUE
;;; Return TRUE
Debug-Output "$(InfFile) $(Option): WriteParameters"
endif
endif
;;; IfStr(i) $($R0) == TRUE
IfStr(i) $(AdapterStatus) == TRUE
Return STATUS_SUCCESSFUL
else
Return STATUS_FAILED
endif
[ConfigureAdapter]
set Option = $(!p:Option)
read-syms GeneralConstants
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
ifstr(i) $(!NTN_RegBase) == $(ProductKeyName)
Shell $(UtilityInf) RegistryErrorString CANNOT_CONFIGURE_SOFTWARE
Shell "" ShellError $($R0)
Return STATUS_FAILED
endif
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
Shell $(UtilityInf) RegistryErrorString CANNOT_FIND_COMPONENT_SERVICE
Shell "" ShellError $($R0)
Return STATUS_FAILED
endif
Shell $(UtilityInf) FindService, $(KeyProduct)
Ifstr(i) $($R0) != NO_ERROR
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return STATUS_FAILED
endif
Set !KeyParameters = $($R2)
CloseRegKey $($R1)
Ifstr $(!KeyParameters) == $(KeyNull)
Shell $(UtilityInf) RegistryErrorString CANNOT_FIND_COMPONENT_SERVICE
Shell "" FatalError $($R0)
Return STATUS_FAILED
endif
set ValueName = ""
set ValueData = ""
set ValueStr = ""
set ValueList = {}
EnumRegValue $(!KeyParameters) ValueList
ForListDo $(ValueList)
set ValueItem = $($)
set ValueName = *($(ValueItem),1)
set ValueData = *($(ValueItem),4)
ifstr(i) $(ValueName) == "Channel"
set !p:ChannelIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "EtherID"
set !p:EtherID = $(ValueData)
else-ifstr(i) $(ValueName) == "NetworkAddress"
set !p:NetworkAddress = $(ValueData)
else-ifstr(i) $(ValueName) == "SSID"
set !p:SSID = $(ValueData)
else-ifstr(i) $(ValueName) == "NetworkType"
set !p:NetworkTypeIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "InterruptNumber"
set !p:IRQIndex = $(ValueData)
else-ifstr(i) $(ValueName) == "IOBaseAddress"
set !p:IOBaseValue = $(ValueData)
else-ifstr(i) $(ValueName) == "MemoryBaseAddress"
set !p:MemAddrValue = $(ValueData)
endif
EndForListDo
set !p:ChannelValue = *($(ChannelList), ~($(ChannelValues),$(!p:ChannelIndex)))
ifstr(i) $(!p:ChannelValue) == ""
set !p:ChannelValue = *($(ChannelList), 1)
endif
set !p:NetworkTypeValue = *($(NetworkTypeList), ~($(NetworkTypeValues),$(!p:NetworkTypeIndex)))
ifstr(i) $(!p:NetworkTypeValue) == ""
set !p:NetworkTypeValue = *($(NetworkTypeList), 1)
endif
set !p:IRQLevel = *($(IRQList), ~($(IRQLevels),$(!p:IRQIndex)))
ifstr(i) $(!p:IRQLevel) == ""
set !p:IRQLevel = *($(IRQList), 11)
endif
winagn =+
;;; Shell "" AdapterSetup
set AdapterStatus = FALSE
set NotifyFields = {NO, NO, NO, NO}
;;; set EditTextIn = $(!p:SSID)
;;; set EditTextLim = 50
;;; set EditFocusOn = "ALL"
read-syms ResourcesDlg$(!STF_LANGUAGE)
set Combo1Out = $(!p:IRQIndex)
set-dectohex Combo2Out = $(!p:IOBaseValue)
set-dectohex Combo3Out = $(!p:MemAddrValue)
;;; ui start "InputDlg"
ui start "Config"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set !p:IRQIndex = $(Combo1Out)
set-hextodec !p:IOBaseValue = $(Combo2Out)
set-hextodec !p:MemAddrValue = $(Combo3Out)
set !p:IOBaseIndex = $(Combo2Out)
set !p:MemAddrIndex = $(Combo3Out)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set AdapterStatus = STATUS_USERCANCEL
Debug-Output "$(InfFile) $(Option): User Cancel"
ui pop 1
goto end
else
ui pop 1
goto end
endif
read-syms WLANDlg$(!STF_LANGUAGE)
set Combo1Out = $(!p:NetworkTypeIndex)
set Combo2Out = $(!p:ChannelIndex)
set EditTextIn = $(!p:SSID)
ui start "InputDlg"
;;; ui start "System"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set !p:NetworkTypeIndex = $(Combo1Out)
set !p:ChannelIndex = $(Combo2Out)
Set !p:SSID = $(EditTextOut)
set AdapterStatus = TRUE
Debug-Output "$(InfFile) $(Option): User Continue"
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set AdapterStatus = STATUS_USERCANCEL
Debug-Output "$(InfFile) $(Option): User Cancel"
ui pop 1
goto end
else
ui pop 1
goto end
endif
set !p:IRQLevel = *($(IRQLevels), ~($(IRQList),$(!p:IRQIndex)))
set !p:NetworkTypeValue = *($(NetworkTypeValues), ~($(NetworkTypeList),$(!p:NetworkTypeIndex)))
set !p:ChannelValue = *($(ChannelValues), ~($(ChannelList),$(!p:ChannelIndex)))
ifstr(i) $(DLGEVENT) == "CONTINUE"
IfStr(i) $(!STF_NCDETINFO) == {}
Set !p:BusType = 0
Set !p:BusNumber = 0
Else
Set !p:BusType = *($(!STF_NCDETINFO),5)
Set !p:BusNumber = *($(!STF_NCDETINFO),6)
EndIf
Endif
end = +
;;; return $(AdapterStatus)
ifstr(i) $(AdapterStatus) == STATUS_USERCANCEL
Debug-Output "$(InfFile) $(Option): InstallAdapter STATUS_USERCANCEL"
Return STATUS_USERCANCEL
endif
;;; IfStr(i) $($R0) != TRUE
;;; Return STATUS_USERCANCEL
;;; endif
;;; Shell "" WriteParameters
Set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(!p:BusType)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(!p:BusNumber)},+
{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(!p:AdapterType)},+
;; {CardType,$(NoTitle),$(!REG_VT_DWORD),2},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(!p:CFID)},+
{IOBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(!p:IOBaseValue)},+
{MemoryBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(!p:MemAddrValue)},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(!p:IRQLevel)},+
{Channel,$(NoTitle),$(!REG_VT_DWORD),$(!p:ChannelValue)},+
{SSID,$(NoTitle),$(!REG_VT_SZ),$(!p:SSID)},+
{NetworkType,$(NoTitle),$(!REG_VT_DWORD),$(!p:NetworkTypeValue)},+
;; {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
{EarlyTxThreshold,$(NoTitle),$(!REG_VT_DWORD),$(!p:EarlyTxThreshold) },+
{ChipOnCardbus,$(NoTitle),$(!REG_VT_DWORD),1},+
{TxMaxDMABurst,$(NoTitle),$(!REG_VT_DWORD),6},+
{RxMaxDMABurst,$(NoTitle),$(!REG_VT_DWORD),6},+
{TxInterFrameGap,$(NoTitle),$(!REG_VT_DWORD),3},+
{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),0}}
Shell $(UtilityInf), AddValueList, $(!KeyParameters), $(NewValueList)
Set Status = $($R0)
Shell "" SetUpPcmcia
CloseRegKey $(!KeyParameters)
Ifstr(i) $(Status) != NO_ERROR
Shell $(UtilityInf) RegistryErrorString $(Status)
Shell "" ShellError $($R0)
set AdapterStatus = FALSE
;;; Return FALSE
endif
set AdapterStatus = TRUE
;;; Return TRUE
;;; IfStr(i) $($R0) == TRUE
IfStr(i) $(AdapterStatus) == TRUE
Return STATUS_SUCCESSFUL
else
Return STATUS_FAILED
endif
[NoWay]
read-syms GeneralConstants
Shell "" ShellError "NoWay"
Return STATUS_FAILED
[RemoveAdapter]
read-syms GeneralConstants
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
set Option = $(!p:Option)
Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), +
$(ProductSoftwareName), $(!NTN_RegBase)
ifstr(i) $($R0) != NO_ERROR
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return STATUS_FAILURE
endif
Return STATUS_SUCCESSFUL
[UpgradeSoftware]
read-syms GeneralConstants
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
set SrcDir = $(!p:SrcDir)
set Option = $(!p:Option)
ifstr(i) $(ProductKeyName) == $(!NTN_RegBase)
OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct
Ifstr $(KeyProduct) == $(KeyNull)
Return STATUS_FAILED
endif
set DoCopy = YES
set AddCopy = YES
Shell "" SetCopy $(DoCopy) $(AddCopy) $(SrcDir) "Install-Update"
SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)}
SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)}
CloseRegKey $(KeyProduct)
else
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) NetworkCardKey
Ifstr(i) $(NetworkCardKey) == $(KeyNull)
Return STATUS_FAILED
endif
GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo
set ServiceName = *($(ServiceNameInfo), 4)
OpenRegKey $(NetworkCardKey) "" "NetRules" $(MAXIMUM_ALLOWED) NetRuleKey
Ifstr(i) $(NetRuleKey) == $(KeyNull)
Return STATUS_FAILED
endif
CloseRegKey $(NetRules)
CloseRegKey $(NetworkCardKey)
OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_ServiceBase)"\"$(ServiceName) $(MAXIMUM_ALLOWED) ServiceKey
Ifstr(i) $(ServiceKey) == $(KeyNull)
Return STATUS_FAILED
endif
CloseRegKey $(ServiceKey)
endif
Return STATUS_SUCCESSFUL
[AdapterSetup]
read-syms GeneralConstants
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
read-syms DialogConstants$(!STF_LANGUAGE)
set Option = $(!p:Option)
set AdapterStatus = FALSE
set NotifyFields = {NO, NO, NO, NO}
set EditTextIn = ""
set EditTextLim = ""
set EditFocusOn = ""
RetryDialog =+
set Combo1Out = $(!p:IRQIndex)
set Combo2Out = $(!p:IOBaseIndex)
set Combo3Out = $(!p:MemAddrIndex)
read-syms ResourcesDlg$(!STF_LANGUAGE)
ui start "InputDlg"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set !p:IRQIndex = $(Combo1Out)
set !p:IOBaseIndex = $(Combo2Out)
set !p:MemAddrIndex = $(Combo3Out)
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set AdapterStatus = STATUS_USERCANCEL
Debug-Output "$(InfFile) $(Option): User Cancel"
ui pop 1
goto end
else
ui pop 1
goto end
endif
set Combo1Out = $(!p:NetworkTypeIndex)
set Combo2Out = $(!p:ChannelIndex)
set EditTextOut = $(!p:SSID)
read-syms WLANDlg$(!STF_LANGUAGE)
ui start "InputDlg"
ifstr(i) $(DLGEVENT) == "CONTINUE"
set !p:NetworkTypeIndex = $(Combo1Out)
set !p:ChannelIndex = $(Combo2Out)
Set !p:SSID = $(EditTextOut)
set AdapterStatus = TRUE
Debug-Output "$(InfFile) $(Option): User Continue"
ui pop 1
else-ifstr(i) $(DLGEVENT) == "BACK"
set AdapterStatus = STATUS_USERCANCEL
Debug-Output "$(InfFile) $(Option): User Cancel"
ui pop 1
goto end
else
ui pop 1
goto end
endif
set !p:IRQLevel = *($(IRQLevels), ~($(IRQList),$(!p:IRQIndex)))
set !p:IOBaseValue = *($(IOBaseValues), ~($(IOBaseList),$(!p:IOBaseIndex)))
set !p:MemAddrValue = *($(MemAddrValues), ~($(MemAddrList),$(!p:MemAddrIndex)))
set !p:NetworkTypeValue = *($(NetworkTypeValues), ~($(NetworkTypeList),$(!p:NetworkTypeIndex)))
set !p:ChannelValue = *($(ChannelValues), ~($(ChannelList),$(!p:ChannelIndex)))
ifstr(i) $(DLGEVENT) == "CONTINUE"
IfStr(i) $(!STF_NCDETINFO) == {}
Set !p:BusType = 0
Set !p:BusNumber = 0
Else
Set !p:BusType = *($(!STF_NCDETINFO),5)
Set !p:BusNumber = *($(!STF_NCDETINFO),6)
EndIf
Endif
end = +
return $(AdapterStatus)
[SetCopy]
read-syms GeneralConstants
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
set DoCopy = $($0)
set AddCopy = $($1)
set SrcDir = $($2)
set InstallSection = $($3)
set Needcopy = FALSE
Ifstr(i) $(DoCopy) == "YES"
set NeedCopy = TRUE
else-ifstr(i) $(AddCopy) == "YES"
set NeedCopy = TRUE
else
Return TRUE
endif
set BuiltIn = "YES"
ifstr(i) $(!NTN_Origination) == "NCPA"
set BuiltIn = "NO"
endif
Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) $(BuiltIn)
Debug-Output "$(InfFile) $(Option): DoAskSource"
Ifstr(i) $($R0) == STATUS_FAILED
Debug-Output "$(InfFile) $(Option): DoAskSource FAILED"
Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL"
Shell "" FatalError $($R0)
Return FALSE
Else-Ifstr(i) $($R0) == STATUS_USERCANCEL
Debug-Output "$(InfFile) $(Option): USERCANCEL"
Return FALSE
Endif
Set SrcDir = $($R1)
install $(InstallSection)
Debug-Output "$(InfFile) $(Option): InstallSection"
ifstr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS
Debug-Output "$(InfFile) $(Option): InstallSection NOT SUCCESS"
Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE"
Shell "" FatalError $($R0)
Return FALSE
endif
Debug-Output "$(InfFile) $(Option): InstallSection SUCCESS"
Return TRUE
[SetSoftware]
read-syms GeneralConstants
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
read-syms date
set Option = $(!p:Option)
Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), +
$(ProductSoftwareName), +
$(ProductSoftwareName), +
$(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), +
$(ProductSoftwareImagePath), "kernel", "NDIS", {}, "",+
$(NetEventDLL)
Ifstr(i) $($R0) != NO_ERROR
Debug-Output "$(InfFile) $(Option): AddSortware ERROR"
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return FALSE
endif
Debug-Output "$(InfFile) $(Option): AddSortware NO_ERROR"
;
; At this point:
; $R1 contains the product version key handle;
; $R2 contains the NetRules subkey handle;
; $R3 contains the new Services key handle; and
; $R4 contains the Parameters key
; $R5 contains the Linkage Key
;
set KeyProduct = $($R1)
Set SoftNetRulesKey = $($R2)
CloseRegKey $($R3)
CloseRegKey $($R4)
CloseRegKey $($R5)
Ifstr(i) $($R0) != NO_ERROR
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return FALSE
endif
set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+
{MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+
{MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+
{Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),$($0)}}
Shell $(UtilityInf), AddValueList, $(KeyProduct), $(NewValueList)
Ifstr(i) $($R0) != NO_ERROR
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return FALSE
endif
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+
{use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, +
{bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, +
{bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(SoftNetRulesKey), $(NewValueList)
CloseRegKey $(KeyProduct)
CloseRegKey $(SoftNetRulesKey)
Ifstr(i) $($R0) != NO_ERROR
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return FALSE
endif
return TRUE
[SetHardware]
read-syms GeneralConstants
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
read-syms date
set Option = $(!p:Option)
Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName)
Ifstr(i) $($R0) != NO_ERROR
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return FALSE
endif
;
; At this point:
; $R1 Registry key variable for HARDWARE\Netcard\(n)
; $R2 Registry key variable for HARDWARE\Netcard\(n)\\NetRules
; $R3 Registry key handle for <service>\Parameters key
; $R4 Adapter number assigned to adapter
; $R5 Service name generated by combining svc name with adapter number
;
set !KeyParameters = $($R3)
set KeyAdapterRules = $($R2)
set AdapterNumber = $($R4)
set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+
{Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+
{Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+
{ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+
{ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+
{InstallDate,$(NoTitle),$(!REG_VT_DWORD),$($0)}}
Shell $(UtilityInf), AddValueList, $($R1), $(NewValueList)
Ifstr(i) $($R0) != NO_ERROR
CloseRegKey $($R1)
CloseRegKey $($R2)
CloseRegKey $($R3)
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return FALSE
endif
CloseRegKey $($R1)
set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)""""
set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm)
set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+
{bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, +
{class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, +
{InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}}
Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList)
Ifstr(i) $($R0) != NO_ERROR
CloseRegKey $(!KeyParameters)
CloseRegKey $(KeyAdapterRules)
Shell $(UtilityInf) RegistryErrorString $($R0)
Shell "" ShellError $($R0)
Return FALSE
endif
CloseRegKey $(KeyAdapterRules)
return TRUE
[WriteParameters]
read-syms FileConstants
read-syms GeneralConstants
read-syms FileConstants$(!STF_LANGUAGE)
set Option = $(!p:Option)
set IRQLevel = *($(IRQLevels), ~($(IRQList),$(!p:IRQIndex)))
set IOBaseValue = *($(IOBaseValues), ~($(IOBaseList),$(!p:IOBaseIndex)))
set MemAddrValue = *($(MemAddrValues), ~($(MemAddrList),$(!p:MemAddrIndex)))
set NetworkTypeValue = *($(NetworkTypeValues), ~($(NetworkTypeList),$(!p:NetworkTypeIndex)))
set ChannelValue = *($(ChannelValues), ~($(ChannelList),$(!p:ChannelIndex)))
Set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),$(!p:BusType)},+
{BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(!p:BusNumber)},+
{AdapterType,$(NoTitle),$(!REG_VT_DWORD),$(!p:AdapterType)},+
;; {CardType,$(NoTitle),$(!REG_VT_DWORD),2},+
{MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+
{AdapterCFID,$(NoTitle),$(!REG_VT_DWORD),$(!p:CFID)},+
{IOBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(!p:IOBaseValue)},+
{MemoryBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(!p:MemAddrValue)},+
{InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(!p:IRQLevel)},+
{Channel,$(NoTitle),$(!REG_VT_DWORD),$(!p:ChannelValue)},+
{SSID,$(NoTitle),$(!REG_VT_SZ),$(!p:SSID)},+
{NetworkType,$(NoTitle),$(!REG_VT_DWORD),$(!p:NetworkTypeValue)},+
;; {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(NetworkAddress)},+
{EarlyTxThreshold,$(NoTitle),$(!REG_VT_DWORD),$(!p:EarlyTxThreshold) },+
{ChipOnCardbus,$(NoTitle),$(!REG_VT_DWORD),1},+
{TxMaxDMABurst,$(NoTitle),$(!REG_VT_DWORD),6},+
{RxMaxDMABurst,$(NoTitle),$(!REG_VT_DWORD),6},+
{TxInterFrameGap,$(NoTitle),$(!REG_VT_DWORD),3},+
{Pcmcia,$(NoTitle),$(!REG_VT_DWORD),0}}
Shell $(UtilityInf), AddValueList, $(!KeyParameters), $(NewValueList)
Set Status = $($R0)
Shell "" SetUpPcmcia
CloseRegKey $(!KeyParameters)
Ifstr(i) $(Status) != NO_ERROR
Shell $(UtilityInf) RegistryErrorString $(Status)
Shell "" ShellError $($R0)
Return FALSE
endif
Return TRUE
[ShellError]
read-syms DialogConstants$(!STF_LANGUAGE)
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
set DlgType = "MessageBox"
set STF_MB_TITLE = $(FunctionTitle)
set STF_MB_TEXT = $($0)
set STF_MB_TYPE = 1
set STF_MB_ICON = 3
set STF_MB_DEF = 1
ifstr(i) $(STF_MB_TEXT) == ""
set STF_MB_TEXT = "Unknown Error"
endif
ui start "Error Message"
Return
[Install-Option]
set STF_VITAL = ""
ifstr(i) $(AddCopy) == "YES"
AddSectionFilesToCopyList Files-Sys $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
endif
ifstr(i) $(DoCopy) == "YES"
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
endif
Exit
[Install-Update]
set STF_VITAL = ""
set STF_OVERWRITE = "VERIFYSOURCEOLDER"
AddSectionFilesToCopyList Files-Sys $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
exit
[Install-Dll]
set STF_VITAL = ""
AddSectionFilesToCopyList Files-Sys $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers
set !STF_NCPA_FLUSH_COPYLIST = TRUE
CopyFilesInCopyList
Exit
[FatalError]
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
ifstr(i) $($0) == ""
set Message = "Unknown Error"
else
set Message = $($0)
endif
Shell $(SubroutnInf) SetupMessage $(!STF_LANGUAGE) FATAL $(Message)
Return
[VerifyError]
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
ifstr(i) $($0) == ""
set Message = "Unknown Error"
else
set Message = $($0)
endif
Shell $(SubroutnInf) SetupMessage $(!STF_LANGUAGE) WARNING $(Message)
Return $($R1)
[WarnError]
read-syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
ifstr(i) $($0) == ""
set Message = "Unknown Error"
else
set Message = $($0)
endif
Shell $(SubroutnInf) SetupMessage $(!STF_LANGUAGE) NONFATAL $(Message)
Return
[DebugControl]
set !DebugOutputControl = 1
return
[NetworkAddressDlgENG]
Caption = "Input Network Address"
DlgText = "Please input Network Address: "$(!LF)+
"For example:"$(!LF)+
" Ethernet ID: 020102A3B4C5"$(!LF)$(!LF)+
"(This option is only required when you need to use"+
"some networking applications which need software"+
"programmable Network Address)"
Edit1Label = "&Network Address :"
Continue = "&OK"
Exit = "&Skip"
Help = "&Help"
DlgType = "Edit"
DlgTemplate = "QUERY_COMPUTER_NAME"
EditTextLim = 12
EditTextIn = $(NetworkAddress)
EditFocus = "ALL"
[WLANDlgENG]
Caption = "WLAN Properties"
Edit1Label = "&SSID :"
Combo1Label = "&Network: 0 = Ad hoc, 1 = Infrastructure"
Combo2Label = "&Channel :"
Help = "&Help"
Continue = "&OK"
Cancel = "C&ancel"
DlgType = Combination
DlgTemplate = "RPCPROVIDE"
EditTextIn = $(SSID)
EditFocus = "ALL"
EditTextLim = ""
Combo1List = $(NetworkTypeList)
Combo1Out = $(NetworkTypeIndex)
Combo2List = $(ChannelList)
Combo2Out = $(ChannelIndex)
ComboListItemsIn = {Combo1List, Combo2List}
ComboListItemsOut = {Combo1Out, Combo2Out}
CBOptionsGreyed = {}
ExitState = "Active"
[ResourcesDlgENG]
Group1 = "Resources Properties"
HelpContext = 1
Caption = "Resources Properties"
Combo1Label = "&Interrupt :"
Combo2Label = "I/O &Port :"
Combo3Label = "&Memory Address :"
Combo1List = $(IRQList)
Combo1Out = $(IRQIndex)
Combo2List = $(IOBaseList)
Combo2Out = $(IOBaseValue)
Combo3List = $(MemAddrList)
Combo3Out = $(MemAddrValue)
DlgType = Combination
DlgTemplate = "WD"
ComboListItemsIn = {Combo1List, Combo2List, Combo3List}
ComboListItemsOut = {Combo1Out, Combo2Out, Combo3Out}
CBOptionsGreyed = {}
EditTextIn = ""
EditTextLim = ""
NotifyFields = {NO, NO, NO}
HelpContext = 1
Help = "&Help"
Continue = "&Continue"
Cancel = "C&ancel"
[SetUpPcmcia]
Read-Syms FileConstants
read-syms FileConstants$(!STF_LANGUAGE)
Read-Syms PcmciaKeys
Read-Syms GeneralConstants
Debug-Output "Opening PCMCIA DataBase"
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaPath) $(MAXIMUM_ALLOWED) PcmciaKey
IfStr(i) $(PcmciaKey) == $(KeyNull)
Debug-Output "Failed to open "$(PcmciaPath)
Shell "" FatalError "Cannot Open PCMCIA Registry DataBase!"
Return FALSE
EndIf
Debug-Output "Opening PCMCIA Manufacture Key"
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaManufacturePath) $(MAXIMUM_ALLOWED) PcmciaManufactureKey
IfStr(i) $(PcmciaManufactureKey) == $(KeyNull)
Debug-Output "Open failed - creating key"
CreateRegKey $(PcmciaKey) {$(CardManufacturer), 0, 0 } "" $(MAXIMUM_ALLOWED) "" PcmciaManufactureKey
IfStr(i) $(PcmciaManufactureKey) == $(KeyNull)
Debug-Output "Failed to create PCMCIA Manufacture key"
Shell "" FatalError "Cannot Create Manufacture Key in Registry DataBase PCMCIA!"
CloseRegKey $(PcmciaKey)
Return FALSE
EndIf
EndIf
Debug-Output "Opening PCMCIA Product Key = "$(PcmciaProductPath)
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaProductPath) $(MAXIMUM_ALLOWED) PcmciaProductKey
IfStr(i) $(PcmciaProductKey) == $(KeyNull)
Debug-Output "Open failed - creating key"
CreateRegKey $(PcmciaManufactureKey) {$(CardKeyName), 0, 0 } "" $(MAXIMUM_ALLOWED) "" PcmciaProductKey
IfStr(i) $(PcmciaProductKey) == $(KeyNull)
Shell "" FatalError "Cannot Create PCMCIA Product Key in Registry DataBase PCMCIA!"
CloseRegKey $(PcmciaManufactureKey)
CloseRegKey $(PcmciaKey)
Return FALSE
EndIf
EndIf
Debug-Output "Writing Driver Keyword"
SetRegValue $(PcmciaProductKey) {DeviceType, 0, $(!REG_VT_SZ), NET}
SetRegValue $(PcmciaProductKey) {Driver, 0, $(!REG_VT_SZ), $(ProductSoftwareName)}
CloseRegKey $(PcmciaProductKey)
CloseRegKey $(PcmciaManufactureKey)
CloseRegKey $(PcmciaKey)
Debug-Output "Opening CardWizard Resource Manager"
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaRMKeyName) $(MAXIMUM_ALLOWED) PcmciaRMKey
ifstr $(PcmciaRMKey) == $(NULL)
Debug-Output "Systemsoft CardWizard service not present"
Debug-Output "Disable the Pcmcia.Sys"
set PcmciaSysKeyName = $(!NTN_ServiceBase)"\Pcmcia"
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaSysKeyName) $(MAXIMUM_ALLOWED) PcmciaSysKey
; SetRegValue $(PcmciaSysKey) {Start, 0, $(!REG_VT_DWORD),4} ; '4' disables the driver
CloseRegKey $(PcmciaSysKey)
else
set SystemsoftPresent = $(TRUE)
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaRMDBKeyName) $(MAXIMUM_ALLOWED) PcmciaRMDBKey
ifstr $(PcmciaRMDBKey) == $(NULL)
debug-output "Adding "$(PcmciaRMDBKeyName)
CreateRegKey $(PcmciaRMKey) {"MacDataBase" , 0, 0} "" $(MAXIMUM_ALLOWED) "" PcmciaRMDBKey
CloseRegKey PcmciaRMDBKey
endif
CloseRegKey $(PcmciaRMKey)
endif
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaRMDBKeyName) $(MAXIMUM_ALLOWED) PcmciaRMDBKey
ifstr $(PcmciaRMDBKey) == $(NULL)
Debug-Output "Systemsoft CardWizard service not present"
else
Debug-Output $(PcmciaRMDBKeyName)"\"$(CardManufacturer)
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaRMDBKeyName)"\"$(CardManufacturer) $(MAXIMUM_ALLOWED) PcmciaManufactureKey
ifstr $(PcmciaManufactureKey) == $(NULL)
debug-output "Adding "$(PcmciaRMDBKeyName)"\"$(CardManufacturer)
CreateRegKey $(PcmciaRMDBKey) {$(CardManufacturer), 0, 0} "" $(MAXIMUM_ALLOWED) "" PcmciaManufactureKey
else
debug-output "Manufacture sub key already exist"
endif
OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaRMDBKeyName)"\"$(CardManufacturer)"\"$(CardKeyName) $(MAXIMUM_ALLOWED) PcmciaProductKey
ifstr $(PcmciaProductKey) == $(NULL)
debug-output "Adding "$(PcmciaRMDBKeyName)"\"$(CardManufacturer)"\"$(CardKeyName)
CreateRegKey $(PcmciaManufactureKey) {$(CardKeyName), 0, 0} "" $(MAXIMUM_ALLOWED) "" PcmciaProductKey
SetRegValue $(PcmciaProductKey) {MacDriverHandle, 0, $(!REG_VT_DWORD),0}
SetRegValue $(PcmciaProductKey) {MacDriverName,0,$(!REG_VT_SZ),$(ProductSoftwareName)}
SetRegValue $(PcmciaProductKey) {MacDriverState,0,$(!REG_VT_DWORD),1}
SetRegValue $(PcmciaProductKey) {MacDriverVersion,0,$(!REG_VT_DWORD),$(ProductMajorVersion)$(ProductMinorVersion)}
SetRegValue $(PcmciaProductKey) {MacSwapCapability,0,$(!REG_VT_DWORD),2}
else
debug-output "Device sub key already exist"
GetRegValue $(PcmciaProductKey),+"MacDriverName",GetData
ifstr *($(GetData),7) != $(ProductSoftwareName)
SetRegValue $(PcmciaProductKey) {MacDriverHandle, 0, $(!REG_VT_DWORD),0}
SetRegValue $(PcmciaProductKey) {MacDriverName,0,$(!REG_VT_SZ),$(ProductSoftwareName)}
SetRegValue $(PcmciaProductKey) {MacDriverState,0,$(!REG_VT_DWORD),1}
SetRegValue $(PcmciaProductKey) {MacDriverVersion,0,$(!REG_VT_DWORD),$(ProductMajorVersion)$(ProductMinorVersion)}
SetRegValue $(PcmciaProductKey) {MacSwapCapability,0,$(!REG_VT_DWORD),2}
endif
endif
CloseRegKey $(PcmciaProductKey)
CloseRegKey $(PcmciaManufactureKey)
CloseRegKey $(PcmciaRMDBKey)
endif
Debug-Output "All done with SetUpPcmcia"
return TRUE
;
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.