Readme.txt Driver File Contents (wmclient.exe)

*****************************************************************************
                     WaveMANAGER/CLIENT software version 1.16

      WaveLAN Diagnostic Utility for Microsoft Windows 95 and Windows NT
				  May, 1997
                  
			Copyright (c) 1997 Lucent Technologies Inc.
*****************************************************************************

	WaveMANAGER/CLIENT is a diagnostic utility that provides a Microsoft 
	Windows 95 and Windows NT oriented user-interface to monitor wireless
	performance of WaveLAN wireless networks. 
	To run the utility, you need to have the WaveLAN Miniport Driver version
	1.16 installed. 
	Miniport Drivers are designed to run under the Microsoft Windows 95 
	and Windows NT Operating Systems. 
	As Windows for Workgroups (v.3.x) runs on the MS-DOS operating system, 
	you can not use WaveMANAGER/CLIENT under Windows for Workgroups.

		       Table of Contents:

	1. About the WaveMANAGER/CLIENT 
	2. System Requirements
	3. Installation notes
	4. Technical Constraints
	5. Known potential problems.
	6. Technical Support
	7. File Names and Function
	
*****************************************************************************

1. About WaveMANAGER/CLIENT.
   ==============================================   
	WaveMANAGER/CLIENT combines the diagnostic functionalities that were 
	previously supported by the following MS-DOS-based WaveLAN utilities.
	* Point-to-Point Diagnostics (ptpdiag.exe)
	* WaveMONITOR (wmonitor.exe)
	* WaveLAN Frequency Select Utility (wfreqsel.exe)
	* Access Control Table Manager (wpaccess.exe)

	WaveMANAGER/CLIENT enables you to:
	* Perform a 'LINK TEST' to diagnose the wireless connection between 
	  two WaveLAN stations, or between a WaveLAN station and a WavePOINT
	  access point.
	* Run the 'SITE MONITOR' to diagnose the wireless coverage of your 
	  network environment.
	* Change the operating frequency of the WaveLAN Card in the 
	  monitoring station.
	* Edit a Access Control Table file or append the MAC address of the 
	  monitoring station to the Access Control Table file.
	
	Note: The SITE MONITOR is only available when the monitoring station is 
	equipped with a WavewLAN/PCMCIA Card.

	WaveMANAGER/CLIENT is installed with on-line help documentation that 
	will describe the various diagnostic options, and explain the 
	displayed WaveLAN parameters. 
  
2. System Requirements.
   ==============================================

	To install/run the WaveMANAGER/CLIENT, you will need a computing 
	device that:
	*  Runs the Microsoft Windows 95 or Windows NT operating system.
	*  Has the WaveLAN Miniport Driver installed (version 1.16)

	If your computer does not have the correct driver installed, 
	the WaveMANAGER/CLIENT will not work, but prompt you to (re)-install
	the correct WaveLAN Miniport Driver.

3. Installation Notes.
   ==============================================
	The WaveMANAGER/CLIENT program and the WaveLAN Miniport Driver v. 1.16
	are compressed to a self-executing zipfile called 'wmclient.exe'. 
	To extract the files,
	* Open an MS-DOS Window 
	* Move to the diskdrive and directory where you saved the WaveMANAGER/CLIENT 
	  software (e.g.: A:\ or C:\TEMP). 
	* At the prompt type:
		wmcclient.exe -d
	  Where the command line parameter -d is required to rebuild the required directory tree 
	  of the waveMANAGER/CLIENT program and the WaveLAN Miniport Driver.

	The WaveMANAGER/CLIENT does not have a 'Setup' utility that will upgrade the driver.
	This should be done manually.

	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
	UPGRADING THE WAVELAN MINIPORT DRIVER SHOULD ONLY BE DONE BY A SKILLED
	LAN ADMINISTRATOR OR SUPPORT ENGINEER THAT HAS A WORKING KNOWLEDGE OF
	THE WINDOWS 95 AND WINDOWS NT OPERATING SYTEM. 
	PLEASE READ CAREFULLY THE INSTRUCTIONS THAT ARE DESCRIBED ON THE WEB-
	PAGE FROM WHERE YOU DOWNLOADED THE SOFTWARE PRIOR TO MODIFYING THE 
	NETWORK ADAPTER SETUP, OR STARTING THE UPGRADE PROCEDURE.
	SEE: HTTP://WWW.WAVELAN.COM/SUPPORT/WMAN_CL.HTM  
	!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!	

4. Technical Constraints.
   ==============================================
	Although WaveLAN/ISA cards support the 'autoconnect' to WavePOINT access
	points, the hardware design of these cards does not support the full 
	'Roaming Functionality', required to run the Site Monitor.
	Therefor it is not possible to run the Site Monitor on computing devices 
	equipped with WaveLAN/ISA cards. For this type of stations the Site Monitor 
	Selector will be 'greyed out'. 


5. Known potential problems.
   ==============================================

5.1 'DRIVER NOT FOUND'

	This error message appears when you are trying to run the WaveMANAGER/CLIENT program
	on a computer that has an incompatible version of the WaveLAN Miniport Driver installed.
	

6. File Names and Function
   ====================================================
	The self-executing file wmclient.exe will unpack the files listed below in 
	two different subdirectories of the directory where you saved the downloaded 
	file 'wmclient.exe'. 
	For example if you chose to save the file wmclient to your harddisk 
	directory 'C:\Program Files\WaveLAN', 
	
	Files associated with the WaveLAN Miniportdriver v.1.16 
	will be extracted to:
	
	C:\Program Files\WaveLAN\Drivers\

	* wvlan22.sys	(Windows 95 & Windows NT)
	* wvlan22.inf   (Windows 95)
	* wv2uif.vxd	(Windows 95)

	* oemsetup.inf	(Windows NT)
	* wvlan22.hlp	(Windows NT)
	* wvlan22.dll	(Windows NT)
	
	Files associated with the WaveMANAGER/CLIENT program v.1.16 
	will be extracted to:

	C:\Program Files\WaveLAN\WMANAGER\CLIENT\

	* wman_cl.exe   (WaveMANAGER/CLIENT program file).
	* wman_cl.hlp   (associated winhelp file).

	If you would like to install the WaveLAN Miniport Driver or 
	WaveMANAGER/CLIENT program on another Windows 95 or Windows NT 
	computer, you are advised to copy these files to a floppy disk 
	and label the disk 'WaveLAN Miniport Driver v.1.16 for 
	Windows 95 and Windows NT.

7. Technical Support
   ====================================================
   If you encounter problems when installing or using this
   product, or would like information about our other WaveLAN 
   products, please contact your local Lucent Technologies 
   Sales office or Authorized WaveLAN Reseller.
   
   Addresses and telephone numbers of the Lucent Technologies
   Sales offices are listed on our WaveLAN Web Site at the 
   following internet address:

   World Wide Web: http://www.wavelan.com

   On this Web Site you can also find the most recent software and 
   user documentation. Alternatively you can consult our BBS.

   Bulletin Board Service	USA		The Netherlands
	BBS Line 1:        +1 612 638 8494	+31 30 603 9417
	BBS Line 2:   	   +1 612 638 7619	+31 30 609 7553

   WaveLAN Support via E-mail:

   U.S.A.:			usasupport@wavelan.com

   Europe,  Middle East,	emeasupport@wavelan.com
   and Africa:
                          
   Caribean, Latin America 	calasupport@wavelan.com
   and Canada:         

   Asia and Pacific:            apasupport@wavelan.com

   OEM:                         oemsupport@wavelan.com

	If applicable, please complete the 
	WaveLAN Driver Problem Report form and Fax or E-Mail it to us.
	This form is available on the WaveLAN diskette as WVLANPRF.TXT (Plain text
	format).

   In emergency, or when no local support is available, you can reach us 
   at the telephone numbers below. 
   
   ------------------------------------------
   U.S.A.
            Telephone:    +1 800 WAVELAN
            		  +1 937 445 7256	
            Fax:          +1 937 445 5552
	    E-mail:	  usasupport@wavelan.com
   ------------------------------------------
   The Netherlands: 
            Telephone:    +31 30 609 7554
            Fax:          +31 30 609 7636
	    E-mail:	  support@wavelan.com




============================================================================
                End of File
============================================================================
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 2.25