;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; OEMSETNT.INF for WVLAN22.SYS ; ; Copyright (C) 1996 Lucent Technologies ; ; All rights reserved. ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; Set Adapter Type ; [Identification] OptionType = NetAdapter ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; Define platforms supported by this driver. ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; [PlatformsSupported] ISA EISA "Jazz-Internal Bus" ;! MCA ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; Define strings used in the creation of file, DLL and registry ; path strings. ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; [FileConstants] UtilityInf = "UTILITY.INF" SubRoutineInf = "SUBROUTN.INF" ParamInf = "NCPARAM.INF" SoftwareType = "driver" Exit_Code = 0 NetEventDLL = "%SystemRoot%\System32\netevent.dll" IoLogMsgDLL = "%SystemRoot%\System32\IoLogMsg.dll" Manufacturer = "Microsoft" ProductMajorVersion = "3" ProductMinorVersion = "1" ProductVersion = $(ProductMajorVersion)"."$(ProductMinorVersion) ProductSoftwareName = "WVLAN22" ProductSoftwareTitle = "WaveLAN Adapter Driver" ProductSoftwarePath = "\SystemRoot\System32\drivers\WVLAN22.sys" NetRuleSoftwareType = "WVLAN22Sys ndisDriver WVLAN22Driver" NetRuleSoftwareUse = $(SoftwareType) NetRuleSoftwareBindForm = """WVLAN22Sys"" yes no container" NetRuleSoftwareClass = {"WVLAN22Driver basic"} NetRuleSoftwareBindable = {"WVLAN22Driver WVLAN22Adapter non exclusive 100"} ProductHardwareName = "WVLAN22" ProductHardwareTitle = "WaveLAN Adapter" NetRuleHardwareType = "WVLAN22 WVLAN22Adapter" NetRuleHardwareBindForm = " yes yes container" NetRuleHardwareClass = {"WVLAN22Adapter basic"} ProductKeyName = $(!NTN_SoftwareBase)"\"$(Manufacturer)"\"$(ProductSoftwareName)"\CurrentVersion" ParamKeyName = $(!NTN_ServiceBase)"\"$(ProductHardwareName)"\Parameters" PcmciaKeyName = $(!NTN_ServiceBase)"\Pcmcia\DataBase" NCRManufacturerName = "NCR" NCRManufacturerKeyName = $(PcmciaKeyName)"\"$(NCRManufacturerName) ATTManufacturerName = "AT&T" ATTManufacturerKeyName = $(PcmciaKeyName)"\"$(ATTManufacturerName) LTManufacturerName = "Lucent Technologies" LTManufacturerKeyName = $(PcmciaKeyName)"\"$(LTManufacturerName) PcmciaProductName = "WaveLAN/PCMCIA" NCRPcmciaProductName = $(NCRManufacturerKeyName)"\"$(PcmciaProductName) ATTPcmciaProductName = $(ATTManufacturerKeyName)"\"$(PcmciaProductName) LTPcmciaProductName = $(LTManufacturerKeyName)"\"$(PcmciaProductName) ConfigFileName = "WVLAN22.DLL" HelpFileName = "WVLAN22.HLP" ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; Define commonly used constant values and strings ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; [GeneralConstants] from = "" to = "" ExitCodeOk = 0 ExitCodeCancel = 1 ExitCodeFatal = 2 KeyNull = "" MAXIMUM_ALLOWED = 33554432 RegistryErrorIndex = NO_ERROR KeyProduct = "" KeyParameters = "" TRUE = 1 FALSE = 0 NoTitle = 0 ExitState = "Active" OldVersionExisted = $(FALSE) DriverPath = $(!STF_NTPATH)\drivers PcmciaDatabaseKey = "" PcmciaMfgKey = "" PcmciaProdKey = "" ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; Define parameters which will be conditionally added as ; values in the device parameters section. ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; [DriverParameters] DPDebugFlags = 0 DPDomainID = 0000 DPBeaconKey = 0000 DPNWID = 0100 DPEncryptionKey = "" DPStationName = "" DPStationAddress = "" DPPCCARDAttributeMemoryAddress = 884736 DPPCCARDAttributeMemorySize = 20480 DPPCMCIA = 1 DPRoamingCBState = "OFF" DPEncryptCBState = "OFF" ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; Get current date ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; [Date] Now = {} ? $(!LIBHANDLE) GetSystemDate ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; Get id string parameters ; Sets Identifier to OptionType string from above. ; Sets Media to installation disk identifier ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; [Identify] Read-Syms Identification Set Status = STATUS_SUCCESSFUL Set Identifier = $(OptionType) Set Media = #("Source Media Descriptions", 1, 1) Return $(Status) $(Identifier) $(Media) ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; Determine if the language and platform specified is ; supported by this install file. ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; [ReturnOptions] Set Status = STATUS_FAILED Set OptionList = {} Set OptionTextList = {} Set LanguageList = ^(LanguagesSupported, 1) IfContains(i) $($0) in $(LanguageList) IfStr(i) $($1) == "" Goto returnOptions EndIf Set PlatformList = ^(PlatformsSupported, 1) IfContains(i) $($1) in $(PlatformList) Goto returnOptions Else Set Status = STATUS_NOTSUPPORTED Goto finish_ReturnOptions EndIf Else Set Status = STATUS_NOLANGUAGE Goto finish_ReturnOptions EndIf returnOptions = + Set OptionList = ^(Options, 1) Set OptionTextList = ^(OptionsText$($0), 1) Set Status = STATUS_SUCCESSFUL finish_ReturnOptions = + Return $(Status) $(OptionList) $(OptionTextList) ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; Retrieve Install options ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; [InstallOption] ; ; Get parameters from calling routine ; Set Option = $($1) Set SrcDir = $($2) Set AddCopy = $($3) Set DoCopy = $($4) Set DoConfig = $($5) Set LanguageList = ^(LanguagesSupported, 1) ; ; Check that language is supported, and abort if it is not. ; IfContains(i) $($0) NOT-IN $(LanguageList) Return STATUS_NOLANGUAGE EndIf ; ; Turn on debug messages ; Set !DebugOutputControl = 0 ; ; Output working directory and language for debugging ; Debug-Output "WVLAN22: STF_CWDIR = "$(!STF_CWDIR) Debug-Output "WVLAN22: STF_LANGUAGE = "$(!STF_LANGUAGE) Set-Subst LF = "\n" ; ; Get defined strings. ; Read-Syms GeneralConstants Read-Syms FileConstants Read-Syms DriverParameters Read-Syms DialogConstants$(!STF_LANGUAGE) ; ; Check if we were invoked by the Network Control Panel Applet ; IfStr(i) $(!NTN_Origination) == "NCPA" Set Continue = "OK" EndIf ; ; Get strings for the current language ; Read-Syms FileConstants$(!STF_LANGUAGE) ; ; Get date ; Detect Date ; ; Set title for this procedure ; Set-Title $(FunctionTitle) Set to = Begin Set from = Begin Set CommonStatus = STATUS_SUCCESSFUL EndWait ; ; Determine mode selected by user in NCPA ; Begin = + Set ActivateDetection = FALSE IfStr(i) $(!NTN_InstallMode) == Deinstall Set StartLabel = RemoveAdapter Else-IfStr(i) $(!NTN_InstallMode) == Update Set StartLabel = UpgradeSoftware Else-IfStr(i) $(!NTN_InstallMode) == Bind Set StartLabel = BindingAdapter Else-IfStr(i) $(!NTN_InstallMode) == Configure ; ; Do configuration functions ; Set StartLabel = ConfigureAdapter ; Set ActivateDetection = TRUE ; ; Check if product key exists in software hive ; IfStr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "WVLAN22: ProductKeyName="$(ProductKeyName) Shell $(UtilityInf),RegistryErrorString,CANNOT_CONFIGURE_SOFTWARE IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22:ShellCode: RegistryErrorString: "$($ShellCode) Goto ShellCodeError EndIf Set Error = $($R0) Set from = end Set to = end Goto nonFatalInfo EndIf Else install "Install-Dll" ; Set ActivateDetection = TRUE Set StartLabel = InstallAdapter Set OEM_ABANDON_OPTIONS = {} Set OEM_ABANDON_SOFTWARE = FALSE Set OEM_ABANDON_ON = TRUE EndIf ; Debug-Output "WVLAN22: ==================================================" ; Debug-Output "WVLAN22: Option = "$(Option) ; Debug-Output "WVLAN22: STF_CWDIR = "$(!STF_CWDIR) ; Debug-Output "WVLAN22: STF_LANGUAGE = "$(!STF_LANGUAGE) ; Debug-Output "WVLAN22: STF_NCDETECT = "$(!STF_NCDETECT) ; Debug-Output "WVLAN22: STF_NCOPTION = "$(!STF_NCOPTION) ; Debug-Output "WVLAN22: STF_NCDETCARD = "$(!STF_NCDETCARD) ; Debug-Output "WVLAN22: STF_NCDETINFO = "$(!STF_NCDETINFO) ; Debug-Output "WVLAN22: ==================================================" Set DebugFlags = 1 Set MaxTransmits = 1 IfStr(i) $(Option) == WaveLAN_ISA Set BoardType = 1 Set ProductHardwareTitle = "WaveLAN ISA Adapter" EndIf ;! IfStr(i) $(Option) == WaveLAN_MCA ;! Set BoardType = 3 ;! Set ProductHardwareTitle = "WaveLAN MCA Adapter" ;! EndIf IfStr(i) $(Option) == WaveLAN_PCMCIA Set BoardType = 8 Set ProductHardwareTitle = "WaveLAN PCMCIA Adapter" EndIf Set DetectedCard = FALSE Set ActivateDetection = FALSE IfStr(i) $(ActivateDetection) != TRUE IfInt $(BoardType) == 1 ;;; WaveLAN_ISA Debug-Output "WVLAN22: ISA" Set IOAddrList = {768,912,960,992} Set IOAddrValue = 768 Shell $(ParamInf) HexListFromDecList $(IOAddrList) Set IOAddrHexList = $($R0) EndIf ;! IfInt $(BoardType) == 3 ;!;;; WaveLAN_MCA ;! Debug-Output "WVLAN22: MCA" ;! Set IOAddrList = {1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16} ;! Set IOAddrValue = 1 ;! Set Combo1Label = "MCA &Slot:" ;! Shell $(ParamInf) HexListFromDecList $(IOAddrList) ;! Set IOAddrHexList = $($R0) ;! EndIf IfInt $(BoardType) == 8 ;;; WaveLAN_PCMCIA Debug-Output "WVLAN22: PCMCIA" Set IOAddrList = {768, 776, 784, 792, 800, 808, 816,+ 824, 832, 840, 848, 856, 864, 872,+ 880, 888, 896, 904, 912, 920, 928,+ 936, 944, 952, 960, 968, 976, 984, 992, 1000, 1008} Set IOAddrValue = 800 Shell $(ParamInf) HexListFromDecList $(IOAddrList) Set IOAddrHexList = $($R0) Set IRQList = {3,4,5,7,9,10,11,12,15} Set InterruptNumber = 11 EndIf Goto $(StartLabel) EndIf Set TypeList = {{IOAddr, IOAddrList, IoBaseAddress},+ {IRQ, IRQList, InterruptNumber}} Debug-Output "WVLAN22: Calling Param_BuildTypeLists" Shell $(ParamInf) Param_BuildTypeLists $(Option) $(TypeList) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run Param_BuildTypeLists" Goto ShellCodeError EndIf Set Status = $($R0) IfStr(i) $(Status) != STATUS_SUCCESSFUL Debug-Output "WVLAN22: Param_BuildTypeLists ERROR="$(Status) Goto fatalDetect EndIf Debug-Output "WVLAN22: Calling Param_SetDefaults" Shell $(ParamInf) Param_SetDefaults {} Shell $(ParamInf) HexListFromDecList $(IOAddrList) Set IOAddrHexList = $($R0) IfStr(i) $(!STF_NCDETECT) == YES IfStr(i) $(!STF_NCOPTION) == $(Option) Set DetectedCard = TRUE Debug-Output "WVLAN22: Setting DetectedCard = TRUE" EndIf EndIf Shell "" DebugConfiguration "After Parameter Query" Set from = $(fatal) Set to = $(fatal) Goto $(StartLabel) InstallAdapter = + Debug-Output "WVLAN22: InstallAdapter" IfStr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Debug-Output "WVLAN22: Install Dll ERROR="$(STF_INSTALL_OUTCOME) Goto fatal EndIf OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct IfStr $(KeyProduct) != $(KeyNull) CloseRegKey $(KeyProduct) IfStr(i) !(NTN_RegBase) == $(ProductKeyName) Shell $(UtilityInf), VerExistedDlg, $(ProductSoftwareTitle),+ $(ProductVersion) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run VerExistedDlg" Goto ShellCodeError EndIf Debug-Output "WVLAN22: Adapter already installed" Goto end Else Shell $(UtilityInf), CardExistedDlg IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run CardExistedDlg" Goto ShellCodeError EndIf IfStr(i) $($R1) != "OK" Goto end EndIf Set OldVersionExisted = $(TRUE) EndIf EndIf IfStr(i) $(DetectedCard) != TRUE Goto adapterSetup EndIf StartWait Shell $(ParamInf) Param_QueryCard $(!STF_NCDETCARD) EndWait IfStr(i) $($R0) != STATUS_SUCCESSFUL Goto adapterSetup EndIf Set DetectedParams = $($R1) Debug-Output "WVLAN22: Calling Param_SetDefaults to merge detected params" Shell $(ParamInf) Param_SetDefaults $(DetectedParams) Goto adapterSetup ConfigureAdapter = + Debug-Output "WVLAN22: ConfigureAdapter" IfStr $(KeyProduct) == $(KeyNull) OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) $(MAXIMUM_ALLOWED) KeyProduct IfStr $(KeyProduct) == $(KeyNull) Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "WVLAN22: Cannot find component product key." Goto fatalRegistry EndIf EndIf Debug-Output "WVLAN22: Calling FindService" Shell $(UtilityInf) FindService, $(KeyProduct) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run FindService" Goto ShellCodeError EndIf IfStr(i) $($R0) != NO_ERROR Debug-Output "WVLAN22: FindService ERROR="$($R0) Goto fatalRegistry EndIf Set KeyParameters = $($R2) CloseRegKey $($R1) IfStr $(KeyParameters) == $(KeyNull) Set RegistryErrorIndex = CANNOT_FIND_COMPONENT_SERVICE Debug-Output "WVLAN22: Cannot find component service" Goto fatalRegistry EndIf Set OldVersionExisted = $(TRUE) Set ValueName = "" Set ValueData = "" Set ValueStr = "" Set ValueList = {} EnumRegValue $(KeyParameters) ValueList ForListDo $(ValueList) Set ValueItem = $($) Set ValueName = *($(ValueItem),1) Set ValueData = *($(ValueItem),4) IfStr(i) $(ValueName) == "SlotNumber" IfInt $(BoardType) == 3 Set IOAddrValue = $(ValueData) EndIf Else-IfStr(i) $(ValueName) == "IoBaseAddress" IfInt $(BoardType) == 1 Set IOAddrValue = $(ValueData) EndIf IfInt $(BoardType) == 8 Set IOAddrValue = $(ValueData) EndIf Else-IfStr(i) $(ValueName) == "DomainID" Set-DecToHex DPDomainID = $(ValueData) Split-String $(DPDomainID) "x" SplitHex Set DPDomainID = *($(SplitHex),3) Else-IfStr(i) $(ValueName) == "BeaconKey" Set-DecToHex DPBeaconKey = $(ValueData) Split-String $(DPBeaconKey) "x" SplitHex Set DPBeaconKey = *($(SplitHex),3) Else-IfStr(i) $(ValueName) == "NetworkAddress" Set DPStationAddress = $(ValueData) Else-IfStr(i) $(ValueName) == "EncryptionKey" Set DPEncryptionKey = $(ValueData) Else-IfStr(i) $(ValueName) == "StationName" Set DPStationName = $(ValueData) Else-IfStr(i) $(ValueName) == "RoamingEnable" Set DPRoamingCBState = $(ValueData) Else-IfStr(i) $(ValueName) == "EncryptionEnable" Set DPEncryptCBState = $(ValueData) Else-IfStr(i) $(ValueName) == "NWID" Set-DecToHex DPNWID = $(ValueData) Split-String $(DPNWID) "x" SplitHex Set DPNWID = *($(SplitHex),3) Else-IfStr(i) $(ValueName) == "DebugFlags" Set DPDebugFlags = $(ValueData) Else-IfStr(i) $(ValueName) == "InterruptNumber" Set InterruptNumber = $(ValueData) Else-IfStr(i) $(ValueName) == "PCCARDAttributeMemoryAddress" Set DPPCCARDAttributeMemoryAddress = $(ValueData) Else-IfStr(i) $(ValueName) == "PCCARDAttributeMemorySize" Set DPPCCARDAttributeMemorySize = $(ValueData) Else-IfStr(i) $(ValueName) == "PCMCIA" Set DPPCMCIA = $(ValueData) Endif EndForListDo Debug-Output "WVLAN22: Paramters read from registry" Debug-Output "WVLAN22: DPRoamingCBState = "$(DPRoamingCBState) Debug-Output "WVLAN22: DPEncryptCBState = "$(DPEncryptCBState) Debug-Output "WVLAN22: DPDomainID = "$(DPDomainID) Debug-Output "WVLAN22: DPBeaconKey = "$(DPBeaconKey) Debug-Output "WVLAN22: DPEncryptionKey = "$(DPEncryptionKey) Debug-Output "WVLAN22: DPNWID = "$(DPNWID) Debug-Output "WVLAN22: DPStationName = "$(DPStationName) Debug-Output "WVLAN22: DPStationAddress = "$(DPStationAddress) adapterSetup = + Debug-Output "WVLAN22: adapterSetup" Shell "" DebugConfiguration "Before Dialog" Set from = adapterOptions Set IOAddrHexValue = *($(IOAddrHexList), ~($(IOAddrList),$(IOAddrValue))) IfStr $(IOADDRHexValue) == $(KeyNull) Set IOADDRList = >($(IOADDRList), $(IoBaseAddress)) Shell $(ParamInf) HexListFromDecList $(IOADDRList) Set IOADDRHexList = $($R0) Set IOADDRHexValue = *($(IOADDRHexList), ~($(IOADDRList),$(IoBaseAddress))) EndIf Set IRQValue = *($(IRQList), ~($(IRQList),$(InterruptNumber))) IfStr $(IRQValue) == $(KeyNull) Set IRQList = >($(IRQList), $(InterruptNumber)) EndIf ;;; Debug-Output "WVLAN22: Before Shell param_parameterconfidence" Shell $(ParamInf) Param_ParameterConfidence ;;; Debug-Output "WVLAN22: After Shell param_parameterconfidence" IfStr(i) $($R0) != STATUS_SUCCESSFUL Debug-Output "WVLAN22: Parameter confidence too low to bypass configuration" Goto adapterOptions EndIf IfStr(i) $(DetectedCard) == TRUE IfStr(i) $(!STF_INSTALL_MODE) != CUSTOM Goto adapterVerify EndIf EndIf adapterOptions = + Debug-Output "WVLAN22: adapterOptions" Set from = adapterOptions LoadLibrary "" $(ConfigFileName) LibHandle Debug-Output "WVLAN22: LibHandle = "$(LibHandle) IfInt $(BoardType) == 8 Debug-Output "WVLAN22: WVIOIRQDlg Setup" Read-Syms WVIOIRQDlg UI Start "WVIOIRQDlg" $(LibHandle) IfStr(i) $(DLGEVENT) == "CONTINUE" Set IOAddrHexValue = $(Combo1Out) Set IOAddrValue = *($(IOAddrList), ~($(IOAddrHexList),$(IOAddrHexValue))) Set InterruptNumber = $(Combo2Out) UI Pop 1 Else-IfStr(i) $(DLGEVENT) == "BACK" Debug-Output "WVLAN22: Action CANCEL" Set CommonStatus = STATUS_USERCANCEL UI Pop 1 FreeLibrary $(LibHandle) Goto end Else Debug-Output "WVLAN22: Action UNKNOWN" UI Pop 1 FreeLibrary $(LibHandle) Goto end EndIf Else Debug-Output "WVLAN22: WVIODlg Setup" Read-Syms WVIODlg UI Start "WVIODlg" $(LibHandle) IfStr(i) $(DLGEVENT) == "CONTINUE" Set IOAddrHexValue = $(Combo1Out) Set IOAddrValue = *($(IOAddrList), ~($(IOAddrHexList),$(IOAddrHexValue))) UI Pop 1 Else-IfStr(i) $(DLGEVENT) == "BACK" Set CommonStatus = STATUS_USERCANCEL Debug-Output "WVLAN22: Action CANCEL" UI Pop 1 FreeLibrary $(LibHandle) Goto end Else Debug-Output "WVLAN22: Action UNKNOWN" UI Pop 1 FreeLibrary $(LibHandle) Goto end EndIf Endif adapterOptions2 = + Debug-Output "WVLAN22: adapterOptions2" Set from = adapterOptions2 Read-Syms WVLAN22Dlg again = + UI Start "WVLAN22Dlg" $(LibHandle) Debug-Output "WVLAN22: Returned from dialog." IfStr(i) $(DLGEVENT) == "CONTINUE" Debug-Output "WVLAN22: Action CONTINUE" Set DPRoamingCBState = *($(CheckItemsOut), 1) Set DPEncryptCBState = *($(CheckItemsOut), 2) Set-HexToDec DPDomainID = *($(EditTextOut),1) Set-HexToDec DPBeaconKey = *($(EditTextOut),2) Set DPEncryptionKey = *($(EditTextOut),3) Set-HexToDec DPNWID = *($(EditTextOut),4) Set DPStationName = *($(EditTextOut),5) Set DPStationAddress = *($(EditTextOut),6) Debug-Output "WVLAN22: DPRoamingCBState = "$(DPRoamingCBState) Debug-Output "WVLAN22: DPEncryptCBState = "$(DPEncryptCBState) Debug-Output "WVLAN22: DPDomainID = "$(DPDomainID) Debug-Output "WVLAN22: DPBeaconKey = "$(DPBeaconKey) Debug-Output "WVLAN22: DPEncryptionKey = "$(DPEncryptionKey) Debug-Output "WVLAN22: DPNWID = "$(DPNWID) Debug-Output "WVLAN22: DPStationName = "$(DPStationName) Debug-Output "WVLAN22: DPStationAddress = "$(DPStationAddress) FreeLibrary $(LibHandle) UI Pop 1 Else-IfStr(i) $(DLGEVENT) == "BACK" Set CommonStatus = STATUS_USERCANCEL Debug-Output "WVLAN22: Action CANCEL" UI Pop 1 FreeLibrary $(LibHandle) Goto end Else-IfStr(i) $(DLGEVENT) == "FREEBUTTON1" Debug-Output "WVLAN22: Action HELP." StartDetachedProcess HelpResult "" "" winhlp32.exe $(!STF_WINDOWSSYSPATH)"\"$(HelpFileName) goto again Else Debug-Output "WVLAN22: Unknown Dialog Action" UI Pop 1 FreeLibrary $(LibHandle) Goto end Endif adapterVerify = + Debug-Output "WVLAN22: adapterVerify" Shell "" DebugConfiguration "After Dialog" IfStr(i) $(DetectedCard) != TRUE Goto skipOptions EndIf Debug-Output "WVLAN22: Calling Param_VerifyCard" Shell $(ParamInf) Param_VerifyCard $(!STF_NCDETCARD) IfStr(i) $($R0) == STATUS_SUCCESSFUL Debug-Output "WVLAN22: Param_VerifyCard succeeded" Goto skipOptions EndIf Set from = adapterOptions Set to = skipOptions Shell $(UtilityInf),RegistryErrorString,VERIFY_WARNING IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run RegistryErrorString" Goto ShellCodeError EndIf Set Error = $($R0) Goto Warning skipOptions = + Debug-Output "WVLAN22: skipOptions" IfInt $(OldVersionExisted) == $(TRUE) IfStr(i) $(!NTN_InstallMode) == configure Goto writeParameters EndIf EndIf Debug-Output "WVLAN22: StartWait" StartWait IfInt $(OldVersionExisted) == $(FALSE) IfStr(i) $(!NTN_InstallMode) == "install" IfStr(i) $(DoCopy) == "YES" Debug-Output "WVLAN22: DoAskSource" Shell $(UtilityInf), DoAskSource, $(!STF_CWDDIR), $(SrcDir) YES IfInt $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError Else-IfStr(i) $($R0) == STATUS_FAILED Shell $(UtilityInf) RegistryErrorString "ASK_SOURCE_FAIL" IfInt $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError EndIf Set Error = $($R0) Goto fatal Else-IfStr(i) $($R0) == STATUS_USERCANCEL Goto successful EndIf Set SrcDir = $($R1) EndIf install "Install-Option" IfStr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Shell $(UtilityInf) RegistryErrorString "UNABLE_COPY_FILE" IfInt $($ShellCode) != $(!SHELL_CODE_OK) Goto ShellCodeError EndIf Set Error = $($R0) Goto fatal EndIf EndIf Debug-Output "WVLAN22: AddSoftwareComponent" Debug-Output "WVLAN22: Mfg = "$(Manufacturer) Debug-Output "WVLAN22: ProductSoftwareName = "$(ProductSoftwareName) Debug-Output "WVLAN22: ProductSoftwareTitle = "$(ProductSoftwareTitle) Debug-Output "WVLAN22: STF_CONTEXTINFNAME = "$(STF_CONTEXTINFNAME) Debug-Output "WVLAN22: NetEventDLL = "$(NetEventDLL) Shell $(UtilityInf), AddSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), + $(ProductSoftwareName), + $(ProductSoftwareTitle), $(STF_CONTEXTINFNAME), + $(ProductSoftwarePath), "kernel", "NDIS", {}, "",+ $(NetEventDLL) Set OEM_ABANDON_SOFTWARE = TRUE IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run AddSoftwareComponent" Goto ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "WVLAN22: AddSoftwareComponent ERROR="$(RegistryErrorIndex) CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) CloseRegKey $($R4) CloseRegKey $($R5) Goto fatalRegistry EndIf Set SoftProductKey = $($R1) Set SoftNetRuleKey = $($R2) Set SoftServiceKey = $($R3) Set SoftParameterKey = $($R4) Set SoftLinkageKey = $($R5) Set NewValueList = {{SoftwareType,$(NoTitle),$(!REG_VT_SZ),$(SoftwareType)},+ {MajorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMajorVersion)},+ {MinorVersion,$(NoTitle),$(!REG_VT_DWORD),$(ProductMinorVersion)},+ {Title,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareDescription)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$(ProductSoftwareName)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(SoftProductKey), $(NewValueList) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run AddValueList: SoftProductKey" Goto ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "WVLAN22: AddValueList ERROR="$(RegistryErrorIndex) CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) Goto fatalRegistry EndIf Set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareType)},+ {use,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareUse)}, + {bindform,$(NoTitle),$(!REG_VT_SZ),$(NetRuleSoftwareBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareClass)}, + {bindable,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleSoftwareBindable)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(SoftNetRuleKey), $(NewValueList) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run AddValueList: SoftNetRuleKey" Goto ShellCodeError EndIf Set RegistryErrorIndex = $($R0) CloseRegKey $(SoftProductKey) CloseRegKey $(SoftNetRuleKey) CloseRegKey $(SoftServiceKey) CloseRegKey $(SoftParameterKey) CloseRegKey $(SoftLinkageKey) IfStr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "WVLAN22: AddValueList ERROR="$(RegistryErrorIndex) Goto fatalRegistry EndIf EndIf doEachAdapter = + Debug-Output "WVLAN22: doEachAdapter" IfInt $(BoardType) == 3 ForListDo $(AdapterList) Set BusNum = *($($),1) Set SlotNum = *($($),2) Debug-Output "WVLAN22: doEachAdapter - BusNum="$(BusNum)" SlotNum="$(SlotNum) Shell $(UtilityInf), IsNetCardAlreadyInstalled, $(BusNum), + $(SlotNum), $(ProductHardwareDescription), $(ProductHardwareName) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run IsNetCardAlreadyInstalled" Goto ShellCodeError EndIf IfStr $($R0) != "NO_ERROR" Debug-Output "WVLAN22: IsNetCardAlreadyInstalled ERROR="$($R0) Set Error = $($R0) Goto fatal EndIf IfStr(i) $($R1) != "YES" Debug-Output "WVLAN22: Calling doOneAdapter." goto doOneAdapter doNextAdapter = + Debug-Output "WVLAN22: Return from doOneAdapter." EndIf EndForListDo Goto successful EndIf doOneAdapter = + Shell $(UtilityInf), AddHardwareComponent, $(ProductHardwareName),$(STF_CONTEXTINFNAME),$(ProductKeyName) IfInt $($R4) != -1 Set OEM_ABANDON_OPTIONS = >($(OEM_ABANDON_OPTIONS), $(!NTN_SoftwareBase)"\Microsoft\Windows NT\CurrentVersion\NetworkCards\"$($R4)) EndIf IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22:Cannot run AddHardwareComponent" Goto ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "WVLAN22: AddHardwareComponent ERROR="$($R0) CloseRegKey $($R1) CloseRegKey $($R2) CloseRegKey $($R3) Goto fatalRegistry EndIf Set HardNetCardKey = $($R1) Set KeyAdapterRules = $($R2) Set KeyParameters = $($R3) Set AdapterNumber = $($R4) Set NewValueList = {{Manufacturer,$(NoTitle),$(!REG_VT_SZ),$(Manufacturer)},+ {Title,$(NoTitle),$(!REG_VT_SZ),"["$($R4)"] "$(ProductHardwareTitle)},+ {Description,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareDescription)},+ {ProductName,$(NoTitle),$(!REG_VT_SZ),$(ProductHardwareName)},+ {ServiceName,$(NoTitle),$(!REG_VT_SZ),$($R5)},+ {InstallDate,$(NoTitle),$(!REG_VT_DWORD),*($(Now),1)}} Shell $(UtilityInf), AddValueList, $(HardNetCardKey), $(NewValueList) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run AddValueList: HardNetCardKey" Goto ShellCodeError EndIf Shell $(UtilityInf), GetBusTypeNum Set BusTypeNum = $($R1) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run GetBusTypeNum" Goto ShellCodeError EndIf Set TempProdName = """"$(ProductHardwareName)$(AdapterNumber)"""" Set TempBindForm = $(TempProdName)$(NetRuleHardwareBindForm) Set NewValueList = {{type,$(NoTitle),$(!REG_VT_SZ),$(NetRuleHardwareType)},+ {bindform,$(NoTitle),$(!REG_VT_SZ),$(TempBindForm)}, + {class,$(NoTitle),$(!REG_VT_MULTI_SZ),$(NetRuleHardwareClass)}, + {InfOption,$(NoTitle),$(!REG_VT_SZ),$(Option)}} Shell $(UtilityInf), AddValueList, $(KeyAdapterRules), $(NewValueList) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run AddValueList: KeyAdapterRules" Goto ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR EndWait Debug-Output "WVLAN22: AddValueList: KeyAdapterRules ERROR="$(RegistryErrorIndex) CloseRegKey $(KeyParameters) CloseRegKey $(KeyAdapterRules) Goto fatalRegistry EndIf CloseRegKey $(HardNetCardKey) CloseRegKey $(KeyAdapterRules) Goto writeParameters writeParameters = + Debug-Output "WVLAN22: writeParameters" IfInt $(BoardType) == 1 ; ISA Set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),1},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOAddrValue)},+ {DebugFlags,$(NoTitle),$(!REG_VT_DWORD),$(DPDebugFlags)},+ {DomainID,$(NoTitle),$(!REG_VT_DWORD),$(DPDomainID)},+ {BeaconKey,$(NoTitle),$(!REG_VT_DWORD),$(DPBeaconKey)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(DPStationAddress)},+ {EncryptionKey,$(NoTitle),$(!REG_VT_SZ),$(DPEncryptionKey)},+ {StationName,$(NoTitle),$(!REG_VT_SZ),$(DPStationName)},+ {RoamingEnable,$(NoTitle),$(!REG_VT_SZ),$(DPRoamingCBState)},+ {EncryptionEnable,$(NoTitle),$(!REG_VT_SZ),$(DPEncryptCBState)},+ {NWID,$(NoTitle),$(!REG_VT_DWORD),$(DPNWID)}} EndIf ;! IfInt $(BoardType) == 3 ;!; MCA ;! Set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),3},+ ;! {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ ;! {SlotNumber,$(NoTitle),$(!REG_VT_DWORD),$(IOAddrValue)},+ ;! {DebugFlags,$(NoTitle),$(!REG_VT_DWORD),$(DPDebugFlags)},+ ;! {DomainID,$(NoTitle),$(!REG_VT_DWORD),$(DPDomainID)},+ ;! {BeaconKey,$(NoTitle),$(!REG_VT_DWORD),$(DPBeaconKey)},+ ;! {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ ;! {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(DPStationAddress)},+ ;! {EncryptionKey,$(NoTitle),$(!REG_VT_SZ),$(DPEncryptionKey)},+ ;! {StationName,$(NoTitle),$(!REG_VT_SZ),$(DPStationName)},+ ;! {RoamingEnable,$(NoTitle),$(!REG_VT_SZ),$(DPRoamingCBState)},+ ;! {EncryptionEnable,$(NoTitle),$(!REG_VT_SZ),$(DPEncryptCBState)},+ ;! {NWID,$(NoTitle),$(!REG_VT_DWORD),$(DPNWID)}} ;! EndIf IfInt $(BoardType) == 8 ; PCMCIA Set NewValueList = {{BusType,$(NoTitle),$(!REG_VT_DWORD),1},+ {BusNumber,$(NoTitle),$(!REG_VT_DWORD),$(BusNum)},+ {DebugFlags,$(NoTitle),$(!REG_VT_DWORD),$(DPDebugFlags)},+ {DomainID,$(NoTitle),$(!REG_VT_DWORD),$(DPDomainID)},+ {BeaconKey,$(NoTitle),$(!REG_VT_DWORD),$(DPBeaconKey)},+ {InterruptNumber,$(NoTitle),$(!REG_VT_DWORD),$(InterruptNumber)},+ {IoBaseAddress,$(NoTitle),$(!REG_VT_DWORD),$(IOAddrValue)},+ {MediaType,$(NoTitle),$(!REG_VT_DWORD),1},+ {NetworkAddress,$(NoTitle),$(!REG_VT_SZ),$(DPStationAddress)},+ {EncryptionKey,$(NoTitle),$(!REG_VT_SZ),$(DPEncryptionKey)},+ {StationName,$(NoTitle),$(!REG_VT_SZ),$(DPStationName)},+ {RoamingEnable,$(NoTitle),$(!REG_VT_SZ),$(DPRoamingCBState)},+ {EncryptionEnable,$(NoTitle),$(!REG_VT_SZ),$(DPEncryptCBState)},+ {NWID,$(NoTitle),$(!REG_VT_DWORD),$(DPNWID)},+ {PCMCIA,$(NoTitle),$(!REG_VT_DWORD),$(DPPCMCIA)},+ {PCCARDAttributeMemoryAddress,$(NoTitle),$(!REG_VT_DWORD),$(DPPCCARDAttributeMemoryAddress)},+ {PCCARDAttributeMemorySize,$(NoTitle),$(!REG_VT_DWORD),$(DPPCCARDAttributeMemorySize)}} EndIf Shell $(UtilityInf), AddValueList, $(KeyParameters), $(NewValueList)\ CloseRegKey $(KeyParameters) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run AddValueList: KeyParameters" Goto ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "WVLAN22: AddValueList: KeyParameters ERROR="$(RegistryErrorIndex) Goto fatalRegistry EndIf ; ; If PCMCIA adapter, add keys and values to allow NT to create attribute window ; when the system boots. IfInt $(BoardType) == 8 ; ; First try to open the PCMCIA registry key ; HKey_Local_Machine\Services\CurrentControlSet\PCMCIA\Database ; OpenRegKey $(!REG_H_LOCAL) "" $(PcmciaKeyName) $(MAXIMUM_ALLOWED) PcmciaDatabaseKey IfStr $(PcmciaDatabaseKey) == $(KeyNull) Debug-Output "WVLAN22: cannot open PCMCIA database key" Goto fatalRegistry EndIf ;;;;; ;;;;; Try to create the manufacturer keys in PCMCIA database, but don't fail if already ;;;;; there. ;;;;; CreateRegKey $(PcmciaDatabaseKey) { $(NCRManufacturerName), 0, GenericClass } "" + $(MAXIMUM_ALLOWED) "" PcmciaMfgKey IfStr $(PcmciaMfgKey) == $(KeyNull) OpenRegKey $(PcmciaDatabaseKey) "" $(NCRManufacturerName) $(MAXIMUM_ALLOWED) PcmciaMfgKey IfStr $(PcmciaMfgKey) == $(KeyNull) Debug-Output "WVLAN22: cannot open PCMCIA\Database\NCR key" CloseRegKey $(PcmciaDatabaseKey) Goto fatalRegistry EndIf EndIf ;;;;; ;;;;; Create WaveLAN/PCMCIA key under manufacturer key ;;;;; CreateRegKey $(PcmciaMfgKey) { $(PcmciaProductName), 0, GenericClass } "" + $(MAXIMUM_ALLOWED) "" PcmciaProdKey IfStr $(PcmciaProdKey) == $(KeyNull) OpenRegKey $(PcmciaMfgKey) "" $(PcmciaProductName) $(MAXIMUM_ALLOWED) PcmciaProdKey IfStr $(PcmciaProdKey) == $(KeyNull) Debug-Output "WVLAN22: cannot open PCMCIA\Database\NCR\WaveLAN/PCMCIA key" CloseRegKey $(PcmciaMfgKey) Goto fatalRegistry EndIf Endif CloseRegKey $(PcmciaMfgKey) ;;;;; ;;;;; Required NCR keys created or opened, now write values to the registry ;;;;; Set NewValueList = {{AttributeMemorySize,$(NoTitle),$(!REG_VT_DWORD),$(DPPCCARDAttributeMemorySize)},+ {DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"},+ {InfFileName,$(NoTitle),$(!REG_VT_SZ),$(!UG_Filename)},+ {Option,$(NoTitle),$(!REG_VT_SZ),"WaveLAN_PCMCIA"},+ {Driver,$(NoTitle),$(!REG_VT_SZ), $(ProductSoftwareName)}} Shell $(UtilityInf), AddValueList, $(PcmciaProdKey), $(NewValueList) CloseRegKey $(PcmciaProdKey) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run AddValueList: PcmciaProdKey (NCR)" Goto ShellCodeError EndIf ;;;;; ;;;;; Repeat above for AT&T cards, but don't need to reopen PCMCIA database key. ;;;;; ;;;;; ;;;;; Try to create the manufacturer keys in PCMCIA database, but don't fail if already ;;;;; there. ;;;;; CreateRegKey $(PcmciaDatabaseKey) { $(ATTManufacturerName), 0, GenericClass } "" + $(MAXIMUM_ALLOWED) "" PcmciaMfgKey IfStr $(PcmciaMfgKey) == $(KeyNull) OpenRegKey $(PcmciaDatabaseKey) "" $(ATTManufacturerName) $(MAXIMUM_ALLOWED) PcmciaMfgKey IfStr $(PcmciaMfgKey) == $(KeyNull) Debug-Output "WVLAN22: cannot open PCMCIA\Database\ATT key" CloseRegKey $(PcmciaDatabaseKey) Goto fatalRegistry EndIf EndIf ;;;;; ;;;;; Create WaveLAN/PCMCIA key under manufacturer key ;;;;; CreateRegKey $(PcmciaMfgKey) { $(PcmciaProductName), 0, GenericClass } "" + $(MAXIMUM_ALLOWED) "" PcmciaProdKey IfStr $(PcmciaProdKey) == $(KeyNull) OpenRegKey $(PcmciaMfgKey) "" $(PcmciaProductName) $(MAXIMUM_ALLOWED) PcmciaProdKey IfStr $(PcmciaProdKey) == $(KeyNull) Debug-Output "WVLAN22: cannot open PCMCIA\Database\NCR\WaveLAN/PCMCIA key" CloseRegKey $(PcmciaMfgKey) Goto fatalRegistry EndIf Endif CloseRegKey $(PcmciaMfgKey) ;;;;; ;;;;; Required AT&T keys created or opened, now write values to the registry ;;;;; Set NewValueList = {{AttributeMemorySize,$(NoTitle),$(!REG_VT_DWORD),$(DPPCCARDAttributeMemorySize)},+ {DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"},+ {InfFileName,$(NoTitle),$(!REG_VT_SZ),$(!UG_Filename)},+ {Option,$(NoTitle),$(!REG_VT_SZ),"WaveLAN_PCMCIA"},+ {Driver,$(NoTitle),$(!REG_VT_SZ), $(ProductSoftwareName)}} Shell $(UtilityInf), AddValueList, $(PcmciaProdKey), $(NewValueList) CloseRegKey $(PcmciaProdKey) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run AddValueList: PcmciaProdKey (NCR)" CloseRegKey $(PcmciaDatabaseKey) Goto ShellCodeError EndIf ;;;;; ;;;;; Repeat above for Lucent Technologies cards, but don't need to reopen PCMCIA database key. ;;;;; ;;;;; ;;;;; Try to create the manufacturer keys in PCMCIA database, but don't fail if already ;;;;; there. ;;;;; CreateRegKey $(PcmciaDatabaseKey) { $(LTManufacturerName), 0, GenericClass } "" + $(MAXIMUM_ALLOWED) "" PcmciaMfgKey IfStr $(PcmciaMfgKey) == $(KeyNull) OpenRegKey $(PcmciaDatabaseKey) "" $(LTManufacturerName) $(MAXIMUM_ALLOWED) PcmciaMfgKey IfStr $(PcmciaMfgKey) == $(KeyNull) Debug-Output "WVLAN22: cannot open PCMCIA\Database\LT key" CloseRegKey $(PcmciaDatabaseKey) Goto fatalRegistry EndIf EndIf ;;;;; ;;;;; Create WaveLAN/PCMCIA key under manufacturer key ;;;;; CreateRegKey $(PcmciaMfgKey) { $(PcmciaProductName), 0, GenericClass } "" + $(MAXIMUM_ALLOWED) "" PcmciaProdKey IfStr $(PcmciaProdKey) == $(KeyNull) OpenRegKey $(PcmciaMfgKey) "" $(PcmciaProductName) $(MAXIMUM_ALLOWED) PcmciaProdKey IfStr $(PcmciaProdKey) == $(KeyNull) Debug-Output "WVLAN22: cannot open PCMCIA\Database\NCR\WaveLAN/PCMCIA key" CloseRegKey $(PcmciaMfgKey) Goto fatalRegistry EndIf Endif CloseRegKey $(PcmciaDatabaseKey) CloseRegKey $(PcmciaMfgKey) ;;;;; ;;;;; Required LT keys created or opened, now write values to the registry ;;;;; Set NewValueList = {{AttributeMemorySize,$(NoTitle),$(!REG_VT_DWORD),$(DPPCCARDAttributeMemorySize)},+ {DeviceType,$(NoTitle),$(!REG_VT_SZ),"NET"},+ {InfFileName,$(NoTitle),$(!REG_VT_SZ),$(!UG_Filename)},+ {Option,$(NoTitle),$(!REG_VT_SZ),"WaveLAN_PCMCIA"},+ {Driver,$(NoTitle),$(!REG_VT_SZ), $(ProductSoftwareName)}} Shell $(UtilityInf), AddValueList, $(PcmciaProdKey), $(NewValueList) CloseRegKey $(PcmciaProdKey) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run AddValueList: PcmciaProdKey (NCR)" CloseRegKey $(PcmciaDatabaseKey) Goto ShellCodeError EndIf EndIf EndWait Goto successful BindingAdapter =+ Set Error = "WVLAN22: Setup does not support binding." Debug-Output $(Error) Goto fatal RemoveAdapter = + Debug-Output "WVLAN22: RemoveAdapter" IfStr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "WVLAN22: Calling RemoveSoftwareComponent" Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run RemoveSoftwareComponent" Goto ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "WVLAN22: RemoveSoftwareComponent ERROR="$($R0) Goto fatalRegistry EndIf Else Debug-Output "WVLAN22: Calling RemoveHardwareComponent" Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductHardwareName), $(!NTN_RegBase) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run RemoveHardwareComponent" Goto ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "WVLAN22: RemoveHardwareComponent ERROR="$($R0) Goto fatalRegistry EndIf EndIf Goto end UpgradeSoftware = + IfStr(i) $(ProductKeyName) == $(!NTN_RegBase) Debug-Output "WVLAN22: Upgrade Software Component" OpenRegKey $(!REG_H_LOCAL) "" $(ProductKeyName) $(MAXIMUM_ALLOWED) KeyProduct IfStr $(KeyProduct) != $(KeyNull) GetRegValue $(KeyProduct),"MajorVersion", VersionInfo Set Version = *($(VersionInfo), 4) Shell $(UtilityInf), GetInfFileNameFromRegistry, $(KeyProduct) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run GetInfFileNameFromRegistry" Goto ShellCodeError EndIf Set !UG_Filename = $($R0) IfStr(i) $(!UG_Filename) != "" install "Install-Update" IfStr(i) $(STF_INSTALL_OUTCOME) != STF_SUCCESS Debug-Output "WVLAN22: Install ERROR="$(STF_INSTALL_OUTCOME) Goto fatal EndIf Else Debug-Output "WVLAN22: InfFileName is NULL" EndIf SetRegValue $(KeyProduct) {MajorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMajorVersion)} SetRegValue $(KeyProduct) {MinorVersion,$(NoTitle),$(!REG_VT_SZ),$(ProductMinorVersion)} IfInt $(Version) != $(ProductVersion) EndIf CloseRegKey $(KeyProduct) Else Debug-Output "WVLAN22: KeyProduct ERROR="$(KeyProduct) Goto fatalRegistry EndIf Else Debug-Output "WVLAN22: Upgrade Hardware Component" OpenRegKey $(!REG_H_LOCAL) "" $(!NTN_RegBase) + $(MAXIMUM_ALLOWED) NetworkCardKey IfStr(i) $(NetworkCardKey) != $(KeyNull) GetRegValue $(NetworkCardKey),"ServiceName", ServiceNameInfo Set ServiceName = *($(ServiceNameInfo), 4) OpenRegKey $(NetworkCardKey) "" "NetRules" + $(MAXIMUM_ALLOWED) NetRuleKey IfStr(i) $(NetRuleKey) != $(KeyNull) Else Debug-Output "WVLAN22: NetKeyRule ERROR="$(NetKeyRule) Goto fatalRegistry EndIf CloseRegKey $(NetRules) CloseRegKey $(NetworkCardKey) Else Debug-Output "WVLAN22: NetworkCardKey ERROR="$(NetworkCardKey) Goto fatalRegistry EndIf OpenRegKey $(!REG_H_LOCAL) "" + $(!NTN_ServiceBase)"\"$(ServiceName) + $(MAXIMUM_ALLOWED) ServiceKey IfStr(i) $(ServiceKey) != $(KeyNull) CloseRegKey $(ServiceKey) Else Debug-Output "WVLAN22: ServiceKey ERROR="$(ServiceKey) Goto fatalRegistry EndIf EndIf Goto end successful = + Goto end abandon = + ForListDo $(OEM_ABANDON_OPTIONS) Shell $(UtilityInf), RemoveHardwareComponent, $(Manufacturer), + $(ProductSoftwareName), $($) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run RemoveHardwareComponent" Goto ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "WVLAN22: RemoveHardwareComponent ERROR="$(RegistryErrorIndex) Goto fatalRegistry EndIf EndForListDo IfStr(i) $(OEM_ABANDON_SOFTWARE) == TRUE Shell $(UtilityInf), RemoveSoftwareComponent, $(Manufacturer), + $(ProductSoftwareName), FALSE IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run RemoveSoftwareComponent" Goto ShellCodeError EndIf Set RegistryErrorIndex = $($R0) IfStr(i) $(RegistryErrorIndex) != NO_ERROR Debug-Output "WVLAN22: RemoveSoftwareComponent ERROR="$(RegistryErrorIndex) Goto fatalRegistry EndIf EndIf Goto end warning = + Shell $(SubRoutineInf) SetupMessage, $(!STF_LANGUAGE), "WARNING", $(Error) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run SetupMessage" Goto ShellCodeError EndIf IfStr(i) $($R1) == "OK" Debug-Output "WVLAN22: WARNING goto "$(to) Goto $(to) Else-IfStr(i) $($R1) == "CANCEL" Debug-Output "WVLAN22: WARNING goto "$(from) Goto $(from) Else Debug-Output "WVLAN22: WARNING goto end" Goto end EndIf nonFatalInfo = + Set CommonStatus = STATUS_USERCANCEL Set Severity = STATUS Goto nonFatalMsg nonFatal = + Set Severity = nonFatal Goto nonFatalMsg nonFatalMsg = + IfStr(i) $(Error) == "" Set Severity = nonFatal Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run RegistryErrorString" Goto ShellCodeError EndIf Set Error = $($R0) EndIf Shell $(SubRoutineInf) SetupMessage, $(!STF_LANGUAGE), $(Severity), $(Error) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run SetupMessage" Goto ShellCodeError EndIf IfStr(i) $($R1) == "OK" Debug-Output "WVLAN22: NONFATAL goto "$(from) Goto $(from) Else Debug-Output "WVLAN22: NONFATAL goto end" Goto end EndIf fatalRegistry = + Shell $(UtilityInf) RegistryErrorString $(RegistryErrorIndex) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run RegistryErrorString" Goto ShellCodeError EndIf Set Error = $($R0) Goto fatal fatalDetect = + Shell $(UtilityInf),RegistryErrorString,CANNOT_DETECT IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run RegistryErrorString" Goto ShellCodeError EndIf Set Error = $($R0) Goto fatal fatal = + IfStr(i) $(Error) == "" Shell $(UtilityInf) RegistryErrorString "SETUP_FAIL" IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run RegistryErrorString" Goto ShellCodeError EndIf Set Error = $($R0) EndIf Shell $(SubRoutineInf) SetupMessage, $(!STF_LANGUAGE), "FATAL", $(Error) IfInt $($ShellCode) != $(!SHELL_CODE_OK) Debug-Output "WVLAN22: Cannot run SetupMessage" Goto ShellCodeError EndIf Goto SetFailed ShellCodeError = + Set DlgType = "MessageBox" Set STF_MB_TITLE = "Error: "$(FunctionTitle) Set STF_MB_TEXT = "Shell Code Error" Set STF_MB_TYPE = 1 Set STF_MB_ICON = 3 Set STF_MB_DEF = 1 UI Start "Error Message" Goto SetFailed SetFailed = + Set CommonStatus = STATUS_FAILED IfStr(i) $(OEM_ABANDON_ON) == TRUE Set OEM_ABANDON_ON = FALSE Goto abandon EndIf Goto end ; ; END - All done, return to setup program ; end = + Goto term term = + Set !DebugOutputControl = 0 Return $(CommonStatus) ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; ; ; Dump configuration information to debug output ; ;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;; [DebugConfiguration] Debug-Output "WVLAN22: CONFIGURATION: "$($0) Debug-Output "WVLAN22: IOAddrValue "$(!p:IOAddrValue) Return [Install-Option] Debug-Output "WVLAN22: Install-Option" Set STF_VITAL = "" IfStr(i) $(AddCopy) == "YES" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers EndIf IfStr(i) $(DoCopy) == "YES" Set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList EndIf IfStr(i) $(DoConfig) == "YES" EndIf Exit [Install-Update] Debug-Output "WVLAN22: Install-Update" Set STF_VITAL = "" Set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-$(Option) $(SrcDir) $(!STF_WINDOWSSYSPATH)\drivers AddSectionFilesToCopyList Files-Inf $(SrcDir) $(!STF_WINDOWSSYSPATH) AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) Set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Install-Dll] Debug-Output "WVLAN22: Install-Dll" Set STF_VITAL = "" Set STF_OVERWRITE = "VERIFYSOURCEOLDER" AddSectionFilesToCopyList Files-Dll $(SrcDir) $(!STF_WINDOWSSYSPATH) Set !STF_NCPA_FLUSH_COPYLIST = TRUE CopyFilesInCopyList exit [Source Media Descriptions] 1 = "WaveLAN Setup Disk", TAGFILE = WVLAN22.sys [Files-Inf] 1, oemsetnt.inf, SIZE=32768, RENAME=$(!UG_Filename) [Files-Dll] 1, $(ConfigFileName),SIZE=65536 1, $(HelpFileName),SIZE=65536 [Files-WaveLAN_ISA] 1, WVLAN22.sys , SIZE=65536 ;![Files-WaveLAN_MCA] ;! 1, WVLAN22.sys , SIZE=65536 [Files-WaveLAN_PCMCIA] 1, WVLAN22.sys , SIZE=65536 [ProductType] STF_PRODUCT = winNT STF_PLATFORM = i386 [Options] WaveLAN_ISA ;! WaveLAN_MCA WaveLAN_PCMCIA [LanguagesSupported] ENG [OptionsTextENG] WaveLAN_ISA = "WaveLAN ISA Adapter" ;! WaveLAN_MCA = "WaveLAN MC Adapter" WaveLAN_PCMCIA = "WaveLAN PCMCIA Adapter" [FileConstantsENG] ProCaption = "Windows NT Setup" ProCancel = "Cancel" ProCancelMsg = "Windows NT Networking is not correctly installed. "+ "Are you sure you want to cancel copying files?" ProCancelCap = "Network Setup Message" ProText1 = "Copying:" ProText2 = "To:" FunctionTitle = "WaveLAN Adapter Setup" ProductSoftwareDescription = "WaveLAN NDIS 3.1 Miniport Driver" ProductHardwareDescription = "WaveLAN Wireless Network Adapter" [DialogConstantsENG] Help = "&Help" Exit = "Cancel" OK = "OK" HelpContext = "" Continue = "Continue" Cancel = "Cancel" [WVIODlg] DlgTemplate = "WVIODLG" DlgType = "Combination" Combo1List = $(IOAddrHexList) Combo1Out = $(IOAddrHexValue) ComboListItemsIn = {Combo1List} ComboListItemsOut = {Combo1Out} NotifyFields = {NO, NO, NO, NO} HelpContext = $(!IDH_DB_OEMSETUP_INS) [WVIOIRQDlg] DlgTemplate = "WVIOIRQDLG" DlgType = "Combination" Combo1List = $(IOAddrHexList) Combo1Out = $(IOAddrHexValue) Combo2List = $(IRQList) Combo2Out = $(InterruptNumber) ComboListItemsIn = {Combo1List, Combo2List} ComboListItemsOut = {Combo1Out, Combo2Out} NotifyFields = {NO, NO, NO, NO} HelpContext = $(!IDH_DB_OEMSETUP_INS) [WVLAN22Dlg] DlgTemplate = "WVLAN22DLG" DlgType = "RadioCombination" EditTextIn = {$(DPDomainID),$(DPBeaconKey),$(DPEncryptionKey),$(DPNWID),$(DPStationName),$(DPStationAddress)} EditTextLim = {4,4,16,4,31,12} NotifyFields = {NO, NO, NO, NO, NO, NO} CheckItemsIn = { $(DPRoamingCBState), $(DPEncryptCBState) } HelpContext = ""Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.