1. wlwie100.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (wlwie100.exe)

===================================================================
Lucent Technologies                                   June 23, 1998
WaveLAN/IEEE Software         			       version 1.00
===================================================================

*******************************************************************

               Table of Contents:

	1. Installing a WaveLAN/IEEE station on OS MS-Windows 95
	2. Remove a WaveLAN/IEEE station from your computer
	3. Installing the Card Access Driver
	4. Installing the packet driver
	5. Running the packet driver
	6. Software versions

*******************************************************************

Note: The driver for MS-Windows NT 4.0 is not yet available.

1. Installing a WaveLAN/IEEE station on OS MS-Windows 95
   =======================================================

1. Make sure you have the MS-Windows 95 diskettes/CD-ROM at hand.
2. Insert the card into a PCMCIA slot of your computer, you should 
get a screen "New hardware found", with description of it as 
"Lucent Technologies-WaveLAN/IEEE".  You will be asked about 
location of the driver for new hardware.
3. Put the driver diskette into your floppy drive and click OK. You 
should see a window saying that driver found in appropriate floppy 
drive.
4.  Click OK  to confirm selection. You now arrive at the 
"WaveLAN/IEEE PC Card properties" screen. Set the WaveLAN_Network_Name
to the WaveLAN Network Name as defined by your WavePOINT Access Point.
5. Click OK. A "Copying files" screen will pop up which asks for 
files on your wavelan diskette and MS-Windows 95 diskettes/CD-ROM.
On some computers the MS-Windows 95 files are also stored on your
hard drive.
Your card is now installed.


2. Removing the WaveLAN/IEEE driver from your computer
   =======================================================

1. Go to the "Network Neighborhood" icon on your display and click 
on the right mouse button, then select "Properties".
2. At the "Network" screen click at WaveLAN/IEEE PC Card", then 
"Remove" button and "OK".
3. DO NOT confirm restarting computer.
4. Go to Windows Explorer to the "Win_Dir\System" directory, where 
"Win_Dir is the directory where your Windows 95 OS is located, by 
default it has name "Windows".
5. Remove Wvlan41.sys and Wvlanuif.vxd.
6. Goto the Win_Dir\Inf directory.
7. Remove Wvlan41.inf.
8. Restart your computer.
Your driver is now removed.


3. Installing the Card Access Driver
   =======================================================

Note: 	The WaveLAN PC Card User's Guide refers to the incorrect name
	"wavecad.sys" for the Card Access Driver. The correct name to
	use is "wvlancad.sys". The driver contained on this diskette
	uses the correct name.

This driver supplies the facilities to the WaveLAN/IEEE Packet driver
WVLAN42.COM and the DOS ODI driver WVLAN43.COM to access the Network
Interface Card (NIC) via an Intel 82365 PCIC. 
The behavior of the driver is controlled via a command line parameters.
Each parameter specification consists of a slash followed by a single
letter, followed by a equal-sign, followed by a value.
Parameters must be separated by white space.
The driver must be loaded via config.sys for example as follows:
device=c:\wavelan\wavecad\wvlancad.sys /i=10 /b=300 /m=e000 
where:
   i: interrupt, valid values 3, 4, 5, 7, 9, 10, 11, 12, 14, 15
   b: I/O base address, valid values n*0x40 in the range 0x0100 - 0xFFC0
   m: memory window, valid values n*0x100 in the range 0xC000 - 0xEF00
The i parameter value is specified as a decimal value, the other values
are specified hexadecimal but without leading 0x or trailing h.




4. Installing the packet driver
   =======================================================

Copy WVLAN42.COM and PACKET.INI to your system. Adjust the
configuration parameters if needed. PACKET.INI contains information
on the configuration parameters including their valid ranges and
default values.


5. Running the packet driver
  =======================================================

To start the Packet Driver enter:

        WVLAN42 L
	
The Packet Driver can be loaded from AUTOEXEC.BAT. The Packet Driver
will look for the configuration file PACKET.INI in the current working
directory.

To unload the Packet Driver enter:

        WVLAN42 U
	
To get help information for the Packet Driver enter:

        WVLAN42 H
	
When the Packet Driver encounters an unknown keyword in configuration
in PACKET.INI it will produce an error message, but load anyway. When
a configuration parameter is given an invalid value in PACKET.INI an
error message will be given as well, but in this case the Packet Driver
will not load.

If you want to run PDETHER on top of the Packet Driver you should use 
version 1.03 or newer.


6. Software versions
   ====================================================
   The following software is provided on these diskettes.

   MS-DOS Diskette:

   General information:
	\README.TXT
	\REPORT.TXT
	\CPY2HDSK.BAT
	\WAVELAN.1_0
	
   Card Access Driver for DOS:
	\WAVECAD\WVLANCAD.SYS			    version 1.00
 
   ODI Driver for DOS:
        \DRIVERS\DOSODI\WVLAN43.COM                 version 1.00
        \DRIVERS\DOSODI\WVLAN43.INS
        \DRIVERS\DOSODI\DRIVER.LST
        \DRIVERS\DOSODI\WVLAN43.CFG

   PACKET Driver for DOS: 			    version 1.20	
        \DRIVERS\PACKET\WVLAN42.COM
	\DRIVERS\PACKET\PACKET.INI


   Windows Diskette:

   General information:
	\README.TXT
	\REPORT.TXT

   Windows 95 NDIS 3 driver:
        \WVLAN41.SYS                                version 1.21
        \WVLAN41.INF
        \WVLAN41N.INF
        \WVLANUIF.VXD

   WaveMANAGER\CLIENT software
	\WAVEMGR\_INST32I.EX_                       version 1.23
	\WAVEMGR\_ISDEL.EXE
	\WAVEMGR\_SETUP.DLL
	\WAVEMGR\_SYS1.CAB
	\WAVEMGR\_USER1.CAB
	\WAVEMGR\DATA.TAG
	\WAVEMGR\DATA1.CAB
	\WAVEMGR\LANG.DAT
	\WAVEMGR\LAYOUT.BIN
	\WAVEMGR\OS.DAT
	\WAVEMGR\README.TXT
	\WAVEMGR\SETUP.EXE
	\WAVEMGR\SETUP.INI
	\WAVEMGR\SETUP.INS
	\WAVEMGR\SETUP.LID


    
*******************************************************************
                                END OF FILE