MSP5900-U Modem ================ Section A: Important notice Section B: Installation of PCI modem drivers on Windows 95 platform Section C: Installation of PCI modem drivers on Windows 98 platform Section D: How to change the installed Com Port to other Com Port Section E: How to configure modem to work with DOS Box games or application Section F: Technical Support ------------------------------------------------------------------------------------------------- Section A: Important notice ================ 1. For information how to use the AT command, please refer to file Atcomset.doc. ------------------------------------------------------------------------------------------------- Section B: Installation of PCI modem drivers on Windows 95 platform ========================================================= 1. Win95 will automatically detect the PCI PnP Modem and displays the 'New Hardware Found' dialog box. 2. Insert the installation disk. 3. Select the 'Driver from disk provided by Hardware manufacturer' option and click 'OK'. 4. Type D:\ in the combo box and click 'OK'. (Assuming the drive letter of your CDROM is D) OR A:\ (Assuming the driver letter of your floppy disk drive is A) Uninstallation ============== Go to 'Control Panel'. Double-click on 'HSP Modem'. Click on 'Uninstall' button and then 'OK' to uninstall the MSP5900-U Modem. ------------------------------------------------------------------------------------------------- Section C: Installation of PCI modem drivers on Windows 98 platform ========================================================= Installation of modem drivers in Win98 is similar to Win95. 1. Windows 98 will automatically detect the PCI modem. Click Next to continue. 2. Insert the installation disk. 3. Select 'Search for the best drivers for your device. (Recommended)' and click 'Next' to continue. 4. Enable 'CD-Rom drive' selection and click 'Next' to continue. If your installation disk is a floppy disk, then enable 'floppy disk drives' selection and click 'Next'. 5. Modem Driver will be found on the installation disk. Click 'Next' to continue. 6. Click 'Finish' to complete modem installation. 7. System will then automatically load all the necessary drivers and files needed. Uninstallation ============== Go to 'Control Panel'. Double-click on 'HSP Modem'. Click on 'Uninstall' button and then 'OK' to uninstall the MSP5900-U Modem. ------------------------------------------------------------------------------------------------- Section D: How to change installed Com Port to other Com Port ================================================ To change to other com port, go to 'Control Panel'. Double-click on 'HSP Modem'. Click on the radio button corresponding to the Com Port you want to change. Click 'Apply'. ------------------------------------------------------------------------------------------------- Section E: How to configure modem to work with DOS Box games or application ================================================================ 1. Run Dosbox utility, Dosbox.exe located at Windows directory. Or click on Start > Run and then key in dosbox.exe. 2. Choose an IRQ . Make sure this IRQ is still available and not used up by other device. You can check this by clicking on Start > Settings > Control Panel > System > Device Manager. Select Computer and then click on Properties. Those IRQ number shown is the one already used up. Once an IRQ is selected, select the corresponding com port but this com port must not be the one used in Windows. Normally it follows the below standard for Dos Box game/application. com port Corresponding IRQ no ======== ==================== com1 IRQ4 com2 IRQ3 com3 IRQ4 com4 IRQ3 4. In case your Dos Box game does not follow the above standard, please find out the IRQ corresponding to the com port you set from the game/application itself. 5. Click 'OK' and restart the computer. Now you can play Dos Box games or use a Dos Box application but remember to set the com port to what you have set in the Dosbox utility. Note : You don't have to use the Dosbox utility every time you want to play Dos Box game or use a Dos Box application. You just have to remember the last settings in Dosbox utility and set it accordingly. ------------------------------------------------------------------------------------------------- Section F: Technical Support ================= *********************************************************** * In case you encounter any problem with our products, * * please quote the following model(s) when calling our * * Technical Support : * * MSP5900-U Modem * *********************************************************** ------- The End ---------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.