; ; SETUP Information ; [wellcome] vender="Bus Master IDE" name="" logo=0 color=2 wintitle="PIIX Bus Master IDE Setup" group="Bus Master" [dir] default=C:\BMIDE [disk] ; ; For configuration of disk driver and fast disk ; driver=TRIDMA.SYS SetupFastDisk=1 CheckCdrom=0 fastdisk=TRICTR.386 transint13=TRIINT13.386 [cdrom] ; ; For configuration of CD-ROM driver ; ; driver=drivername[ parameters] ; driver=TRICD.SYS /D:MSCD000 mscdex=MSCDEX /D:MSCD000 SetupCDROM=1 [diskfiles] ; ; Disk driver ; TRIDMA.SYS= TRICTR.386= TRIINT13.386= [cdromfiles] ; ; CD-ROM driver ; TRICD.SYS= [commonfiles] ; ; Read me ; ;README.TXT= [creategroup] number of utilities=0 [Help] ##Windows 95 1) Insert the floppy disk into drive A:. 2) Open "My Computer", double click "Drive A:". 3) Double click "Win95". 4) Double click the Setup program. 5) Then just follow the instruction. $$ ##Windows NT 1) From the Program Manager, double click on "Windows NT Setup" in the Main group. 2) Select "Options/Add/Remove SCSI Adapters..." 3) Click on Add. 4) The "Select SCSI Adapter Option" dialog will appear; select "Other (Requires a disk from a hardware manufacturer)" from the "Adapter:" list box. 5) Next, the "Insert Diskette" dialog box will appear; insert the Triones PIIX/PIIX3 Bus Master EIDE/ATAPI Driver disk into Drive A: and type in "a:\winnt35" and <Return>. 6) Next, the "Select OEM Option" dialog box will appear; select "PIIX/PIIX3 Bus Master EIDE/ATAPI" and click "OK." 7) Next, the "Select SCSI Adapter Option" dialogbox will appear; click on the "Install" button in the dialog box. If installation is successful, the "SCSI Adapter Setup" dialog box will reappear, and "PIIX/PIIX3 Bus Master EIDE/ATAPI" will be listed. That means the driver is installed. 8) Reboot your system to load the driver. $$ ##OS/2 1) Copy TRIOS2.ADD from the floppy diskette to your hard disk under the OS2 directory (i.e., C:\OS2). 2) Edit C:\CONFIG.SYS to replace BASEDEV=IBM1S506.ADD with BASEDEV=TRIOS2.ADD 3) Reboot the system. $$ ##SCO Unix I. SCO UNIX 3.2.x / SCO Open Desktop 3.x 1) Install SCO UNIX 3.2.x or SCO Open Desktop 3.x using the default SCO IDE driver. 2) Reboot your SCO UNIX system. 3) Insert Triones supplied diskette into the 3.5inch floppy drive of your system. Use doscp command to copy the file TRISCO.TAR to your /tmp directory. For example, if you are using floppy drive A, type: doscp a:/scounix/trisco.tar /tmp/trisco.tar 4) From root directory, type the following commands: mkdir /inst cd /inst tar xvf /tmp/trisco.tar . (NOTE: there is a period at the end of the last command.) 5) Now, insert a blank diskette into the floppy drive A and type: tar cvf /dev/<your floppy drive A device name> . (NOTE: there is a period at the end of the last command.) Your floppy drive A device name could be: rfd096ds15 5.25 DSHD rfd0135ds18 3.5 DSHD rfd048ds9 5.25 DSDD rfd0135ds9 3.5 DSDD Now you have already made an installation diskette for the device driver. Start the installation by typing: custom 6) Select the "Install" operation and then follow the guided steps. When prompted "Do you want to set the device configuration (y/n)", answer "n". 7) Reboot your SCO UNIX system. II. SCO UNIX 5.0 1) Install SCO UNIX 5.0 using the default SCO IDE driver. 2) Reboot your SCO UNIX system. 3) Insert Triones supplied diskette into the 3.5inch floppy drive of your system. Use doscp command to copy the file TRISCO5.TAR to your /tmp directory. For example, if you are using floppy drive A, type: doscp a:/scounix/trisco5.tar /tmp/trisco5.tar 4) From root directory, type the following commands: mkdir /inst cd /inst tar xvf /tmp/trisco5.tar . (NOTE: there is a period at the end of the last command.) 5) Install the driver by typing: ./install 6) Follow the steps and procedures (for control parameter configuration) 7) Reboot your SCO UNIX system. $$ ##NOVELL312 1) Copy the driver TRIN312.DSK to the subdirectory which holds the file SERVER.EXE. 2) Boot up the file server. 3) On the system console and on the command prompt state, type in: load TRIN312.DSK <Enter> You can also include the above command line into the start up file STARTUP.NCF to load the driver automatically. $$ ##NOVELL4x 1) Copy the driver TRIN4X.DSK to the subdirectory which holds the file SERVER.EXE. 2) Boot up the file server. 3) On the system console and on the command prompt state, type in: load TRIN4X.DSK <Enter> You can also include the above command line into the start up file STARTUP.NCF to load the driver automatically. $$Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.