Triones
Bus Master EIDE/ATAPI Device Drivers for Intel PIIX
WINDOWS 95
Revision 3.70B
(December 12,1997)
#############################################################################
NOTE:
This Windows 95 driver dose not support CD-ROM Changers. If you have a
ATAPI CD-ROM Changer installed in your system, please do not install
this driver!
1 INSTALLATION
1. Insert the floppy disk into drive A:.
2. Open "My Computer", double click "Drive A:".
3. Double click "Win95".
4. Double click the Setup program.
5. Then just follow the instructions to install the driver.
IMPORTANT NOTE:
We have found that the Windows 95 OSR2 version would fail to load the
driver on some systems using PIIX4(TX) chipset after you install and
restart the system. The following step could solve this problem if it
happens:
1. Go to <MyComputer and double click Control Panel>
2. Double click System then go to Device Manger and View Devices by Type
3. Go to hard disk controllers
4. Double click Intel PIIX4 Bus Master IDE Controller (Ultra DMA supported)
(there should be a yellow mark besides this instance)
5. Click Resources and you should see a box near the bottom of the screen
that says Set Configuration manaully.
6. Click on the Set Configuration manually and you will see a check next
to Use automatic setting
7. Uncheck the box and when the system asks you to reboot click yes
8. After the system restarts the yellow mark should be gone and your
display in the Device Manger should look like this:
Intel PIIX4 Bus Master IDE Controller (Ultra DMA supported)
Primary IDE Contoller
Secondary IDE Controller
2 DE-INSTALLATION
1. Insert the floppy disk into drive A:.
2. Open "My Computer", double click "Drive A:".
3. Double click "Win95".
4. Double click the Setup program.
5. Then just follow the instruction to de-install the driver.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.