README.TXT Driver File Contents (370inf.zip)

                                 Triones
             Bus Master EIDE/ATAPI Device Drivers for Intel PIIX

                             Revision 3.70B
                           (December 12,1997)

#############################################################################
    T A B L E  O F  C O N T E N T S
#############################################################################
1.  INTRODUCTION
2.  MS-DOS / WINDOWS
3.  Windows 95
4.  Windows NT 3.5/3.51
5.  Windows NT 4.0
6.  Novell 3.X & 4.X
7.  SCO UNIX 3.X
8.  SCO UNIX 5.0
9.  OS/2 2.0 and WARP 3.X
10. Seever Utility


#############################################################################
1.  I N T R O D U C T I O N
#############################################################################
    The PIIX Bus Master EIDE/ATAPI Device Drivers created by TRIONES 
    Technologies, Inc. has the following features:

    1.  Takes advantage of the PIIX chipset bus mastering capability
        and support bus mastering IDE on both IDE hard disks and ATAPI CD-ROM
        drives. This greatly reduces the CPU utilization and increases the
        data transfer rate.
    2.  Supports advanced data transfer timing modes. The PIO mode can be up
        to mode 4, and the DMA mode can be up to Ultra DMA/33 mode 2.
    3.  Supports LBA mode and Multiple-Block (or Multiple-Sector) commands.

    This readme file will describe the setup procedures for the PIIX Bus 
    Master Device Driver for each operating system. The PIIX Bus Master
    Device Drivers can only be used on motherboards with the PIIX chipset and
    the system BIOS must properly initialize the PIIX chipset IDE interface 
    for the Bus Master IDE operation.

    Do not use any other add-in IDE (PCI or ISA) card in the system.


#############################################################################
2.  M S - D O S  /  W I N D O W S
#############################################################################
    Please refer to README.TXT in the DOSWIN directory.


#############################################################################
3.  W I N D O W S  9 5
#############################################################################
    Please refer to README.TXT in the WIN95 directory.


#############################################################################
4.  W I N D O W S  N T 3 . 5 / 3 . 5 1
#############################################################################
    Please refer to README.TXT in the WINNT.35 directory.


#############################################################################
5.  W I N D O W S  N T 4 . 0
#############################################################################
    Please refer to README.TXT in the WINNT.40 directory.


#############################################################################
6.  N O V E L L  3.X & 4.X
#############################################################################
    Please refer to README.TXT in the NOVELL.312 and NOVELL.4x directories
    repectively.


#############################################################################
7.  S C O  U N I X  3.X
#############################################################################
    Please refer to README.TXT in the SCOUNIX.3x directory.


#############################################################################
8.  S C O  U N I X  5.0
#############################################################################
    Please refer to README.TXT in the SCOUNIX.50 directory.


#############################################################################
9.  O S / 2  2.0  and  W A R P  3.X
#############################################################################
    Please refer to README.TXT in the OS2WARP directory.


#############################################################################
10. S E E V E R  U T I L I T Y
#############################################################################
    SEEVER.EXE is a utility that will display the build information for all
    PIIX device drivers. To use this utility type SEEVER and the file
    name.  You will see information about the device driver and when it was
    created. The purpose for this utility is to keep track of the different
    versions of the device drivers that might be released in the future.


#############################################################################
#############################################################################
COPYRIGHT:
    Copyright (c) Triones Technologies, Inc.  1994-1997, All rights reserved.
    No part of this publication may be reproduced, stored in a retrieval
    system, or transmitted in any form or by any means, electronic,
    mechanical, photocopying, recording or otherwise, without the prior
    written consent of Triones Technologies, Inc. Fremont, CA. 94538

LIMITATION OF LIABILITY:
    IN NO EVENT WILL TRIONES BE LIABLE FOR DIRECT, INDIRECT, SPECIAL,
    INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY
    TO USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY
    OF SUCH DAMAGES. IN PARTICULAR, TRIONES SHALL NOT HAVE LIABILITY FOR ANY
    HARDWARE, SOFTWARE, OR DATA STORED USED WITH THE PRODUCT, INCLUDING THE
    COSTS OF REPAIRING, REPLACING, OR RECOVERING SUCH HARDWARE, OR DATA.

TRADEMARKS:
    OS/2 is a registered trademark of International Business Machines
    Corporation.
    MS-DOS, Windows, MS, Windows NT, Windows 95, Windows for WorkGroups
    311 are registered trademarks of Microsoft Corporation.
    NOVELL 3.x, NOVELL 4.x are registered trademarks of NOVELL, Inc.
    SCO UNIX is a registered trademark of UNIX systems Laboratory, Inc.

CHANGES:
    The material in this manual is for information only and is subject to
    change without notice. TRIONES reserves the right to make changes in
    the product design without reservation and without notification to its
    users.


Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web2, load: 1.72