Triones Bus Master EIDE/ATAPI Device Drivers for Intel PIIX NOVELL 4.X Revision 3.60a (March 15,1997) ############################################################################# 1 INSTALLATION 1. Copy the driver TRIN4X.DSK to the subdirectory which holds the file SERVER.EXE. 2. Boot up the file server. 3. On the system console and on the command prompt state, type in: load TRIN4X.DSK <Enter> You can also include the above command line into the start up file STARTUP.NCF to load the driver automatically. For disk operation or CD-ROM operation, please refer to the corresponding NOVELL system user manual. NOVELL has a command "cd help" which describe all features for CD-ROM. 2 TROUBLESHOOTING 2.1 Overriding Drive Capabilities If the NOVELL does not work properly after the installation, it could be that the device drives report wrong capabilities. The user can use parameters to override the capabilities reported by the connected device drives. The user can append parameters with the following format [/V] [/drive [dma=dmamode|pio=piomode] [!lba] [!ms]] to "load TRINxxx". Where V indicates to display verbose information. drive specifies which drive to override on. It can be: PM primary/master PS primary/slave SM secondary/master SS secondary/slave dmamode specifies the overriding DMA mode. It can be: SW2 single word DMA mode 2 MW1 multi-word DMA mode 1 MW2 multi-word DMA mode 2 U0 ultra DMA mode 0 U1 ultra DMA mode 1 U2 ultra DMA mode 2 NO not use DMA operation. The PIO will be used. piomode specifies the overriding PIO mode. It can be: 0 PIO mode 0 1 PIO mode 1 2 PIO mode 2 3 PIO mode 3 4 PIO mode 4 If the pio_mode is specified, the driver will only use PIO operation on the corresponding drive. !lba indicates not to use LBA mode. !ms indicates not to use multi-sectors commands.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.