;//------------------------------------------------------------------------- ;// ;// Dell Inc. PROPRIETARY INFORMATION ;// ;// This software is supplied under the terms of a license agreement or ;// nondisclosure agreement with Dell Inc. and may not be copied or ;// disclosed except in accordance with the terms of that agreement. ;// ;// Copyright (c) 1995-2004 Dell Inc. All Rights Reserved. ;// ;// Abstract/Purpose: ;// Data Accessor static configuration file ;// ;// See Also: ;// See Data Accessor Design Document ;// ;//------------------------------------------------------------------------- ;//------------------------------------------------------------------------- ;// Constant strings ;//------------------------------------------------------------------------- ;//------------------------------------------------------------------------- [numtostrload] smvtype=true objstatus=true smstatus=true smlogmode=true smlogtype=true ;//------------------------------------------------------------------------- [strtostrload] conststrings=true filenames=true ;//------------------------------------------------------------------------- [conststrings] uselegacycmdlogging=true setpropertyloadatstartup=true dapluginappendproductpath=false root=Root mainsystemchassis=MainSystemChassis xmlescapestringval=1 ;//------------------------------------------------------------------------- [filenames] setcmdlogname=omcmdlog.xml ;//------------------------------------------------------------------------- [smvtype] 0xFF=UNDEFINED 0x00=BOOLN 0x01=s8 0x02=s16 0x03=s32 0x04=s64 0x05=u8 0x06=u16 0x07=u32 0x08=u64 0x09=d64 0x0A=LANGID 0x0B=TIME_T 0x0C=BINARY 0x0D=ASTRING 0x0E=USTRING 0x21=S16 0x22=S32 0x23=S64 0x25=U16 0x26=U32 0x27=U64 0x28=D64 0x30=SMSSUTF8STR 0x31=SMSSUCS2STR 0x32=SMXMLSTRBUF ;//------------------------------------------------------------------------- [objstatus] 0=OTHER 1=UNKNOWN 2=OK 3=NON_CRITICAL 4=CRITICAL 5=NON_RECOVERABLE ;//------------------------------------------------------------------------- [smlogmode] 0=unknown 1=none 2=all 3=oldonly 4=newonly ;//------------------------------------------------------------------------- [smlogtype] 0x0000=success 0x0001=error 0x0002=warning 0x0004=information 0x0008=audit_success 0x0010=audit_failure 0xffff=all ;//------------------------------------------------------------------------- [smstatus] ;; Device Driver error codes -1=UNSUCCESSFUL 0=SUCCESS 1=CMD_NOT_IMPLEMENTED 2=CMD_BAD 3=TIMEOUT 4=CANCELLED 5=ABORT 6=PENDING 7=NO_SUCH_DEVICE 8=DEVICE_BUSY 9=DEVICE_BAD 10=DEVICE_SPURIOUS_INTR 11=RESOURCE_LOCKED 12=INVALID_INDEX 13=SMB_ERROR 14=DATA_NOT_READY 15=DATA_UNDERRUN 16=DATA_OVERRUN 17=DEVICE_NOT_READY 18=DEVICE_EMPTY 19=DEVICE_FULL 20=DEVICE_ALREADY_EXISTS 21=PENDING_DOIO_QUEUE 22=PENDING_BUSY_QUEUE ;; Data Engine error codes 256=NO_SUCH_OBJECT 257=OBJECT_BAD 258=OBJECT_ALREADY_EXISTS 260=NO_SUCH_INI 261=INI_BAD 262=INI_NO_SUCH_SECTION 263=INI_NO_SUCH_KEY 264=INI_VALUE_BAD 270=RIGHTS_INSUFFICIENT 271=INVALID_PARAMETER 272=OUT_OF_MEMORY 280=NO_SUCH_XML 281=XML_BAD 282=XML_NO_SUCH_NODE 283=XML_NODE_VALUE_BAD 290=VALUE_TOO_LARGE 291=VALUE_TOO_SMALL 300=OS_SNMP_NOT_FOUND 301=DE_SNMP_NOT_FOUND 302=DECMD_SCRIPT_ERROR ;; DRSC/ESM error codes 1024=DRSC_DATA_OVERFLOW 1025=DRSC_IPMI_FAILURE 1026=DRSC_TIMEOUT 1027=DRSC_MESSAGE_ID_MISMATCH 1028=DRSC_UNABLE_TO_ALLOCATE_BUFFER 1029=DRSC_UNABLE_TO_PARSE_DATA 1030=DRSC_INVALID_SET_REQ_TYPE 1031=DRSC_INVALID_SET_REQ_SUBTYPE 1032=DRSC_FAILURE_FROM_DRSC 1033=DRSC_GENERIC 1034=DRSC_CANT_ALLOC_MSG_BUF 1035=DRSC_OUT_OF_MSG_BUFFERS 1036=DRSC_CHKSUM_SIZE_TOO_BIG 1037=DRSC_CHKSUM_MSGDATA_NULL 1038=DRSC_INVALID_PKT_TYPE 1039=DRSC_DEVID_NOT_FOUND_ON_OPEN 1040=DRSC_DEVID_NOT_FOUND_ON_DESTROY 1041=DRSC_INVALID_FLAGS_ON_OPEN 1042=DRSC_WRITE_MSG_TOO_BIG 1043=DRSC_INVALID_MSG_BUF_ENTRY 1044=DRSC_INVALID_REQUEST_MSG_TYPE 1045=DRSC_INVALID_CHKSUM 1046=DRSC_INVALID_MSGSIZE 1047=DRSC_INVALID_MSGWRITE 1048=DRSC_INVALID_MSGREAD 1049=DRSC_WRITE_MSG_TOO_BIG_RC 1050=DRSC_READ_MSG_TOO_BIG_RC 1051=DRSC_READ_ESCMSG_TOO_BIG_RC 1052=DRSC_DB_PROP 1053=DRSC_OID_PERMIS_DENIED_WRITE 1054=DRSC_OID_PERMIS_DENIED_READ 1055=DRSC_OID_OBJ_TYPE_INVALID 1056=DRSC_OID_OBJ_TYPE_CMDGET_INVALID 1057=DRSC_OID_GROUP_SIZE_INVALID 1058=DRSC_OID_PROPSET_ERR 1059=DRSC_OID_PROPGET_ERR 1060=DRSC_OID_CMDEXEC_ERR 1061=DRSC_OID_GET_ALLOC_ERR 1062=DRSC_OID_SETCMD_ALLOC_ERR 1063=DRSC_OID_OBJ_GROUP_INVALID 1064=DRSC_OID_OBJ_COLUMN_INVALID 1065=DRSC_OID_GET_OUTPUT_TOO_BIG 1066=DRSC_OID_GET_MEM_OVERRUN 1067=DRSC_OID_SETCMD_MEM_OVERRUN 1068=DRSC_OID_SETCMD_CMDLINE_TOO_BIG 1069=DRSC_OID_OBJ_TYPE_STRINGSET_INVALID 1070=DRSC_OID_OBJ_TYPE_INDEXSET_INVALID 1071=DRSC_OID_STRINGGET_ERR 1072=DRSC_OID_INDEXGET_ERR 1073=DRSC_OID_NO_USER_FOUND 1074=DRSC_TIMEOUT_WAITING_FOR_DRSC ;-------------------------------------------------------------------- ; command help strings ;-------------------------------------------------------------------- [getobject] description=Get object data notes=Returns object data based on the given one or more object namespace or identifier [getinstversion] description=Get instrumentation service version notes=Returns the version information of the instrumentation service as major, minor, and revision [getobjectstatus] description=Get the worst case object rolled-up status notes=Returns the calculated worst case object rolled-up status given one or more object namespace or identifier [getoidfromons] description=Get object identifier from namespace notes=Returns the object identifier for the corresponding namespace [getonsfromoid] description=Get object namespace from identifier notes=Returns the object namespace for the corresponding identifier [getchildlist] description=Get a list of child object data based on the given parent object notes=Returns a list of child object data based on the given parent object and a series of filters. See the parameter list for available filters. Provide only one of the object namespace or identifier [getparentlist] description=Get a list of parent object data based on the given child object notes=Returns a list of parent object data based on the given child object and a series of filters. See the parameter list for available filters. Provide only one of the object namespace or identifier [setobject] description=Perform set operation based on the set identifier SETID provided and optional set parameters notes=DEPRECATED: instead use sendsmreq (see section 3.4.8). The SETID is defined by the data populators and is exposed to DA users through the set property configuration INI. [sendsmreq] description=Send SM request based on request identifier REQID and optional request parameters notes=The REQID is defined by the data populators and is exposed to DA users through the configuration INI. If passthru is specified, then an optional name-value pair request input may be provided if suppression of multiple follow-up request and a specific response instance are desired. On success, the request return status and the response data if passthru is specified. Provide only one of the object namespace or identifier. [checkeventfilter] description=check if an event is to be filtered notes=return success if is filtered [seteventcfgall] description=set all event filter for a specific severity notes=set event filter to tag [geteventcfgall] description=get all event filter value for a specific severity notes=return xml data [seteventcfg] description=set event filter by key notes=set event filter (by key) to tag value [geteventcfg] description=get event filter value by key notes=return xml data ;-------------------------------------------------------------------- ; command parameter help strings ;-------------------------------------------------------------------- [oid] description=object identifier [ons] description=object namespace [showobjhead] description=include header information (default=false) [byobjtype] description=search by object type [byobjtypestr] description=search by object type (as string) [byobjstatus] description=search by object status [byobjstatusstr] description=search by object status (as string) [showbody] description=include body information (default=false) [objheadattr] description=header information as attribute (default=true) [recurse] description=search recursively [shownamespace] description=include object namespace info (default=true) [hierarchy] description=result in hierarchy order (default=false); applies only if recurse=true and bytype and bystatus is off [setid] description=object unique set identifier [reqid] description=request unique identifier [ispassthru] description=flag to indicate object set mode is pass-thru [objectclass] description=class of the object key [key] description=unique name of the object key [tag] description=value tag of event filter [severity] description=severity (level) of the event log ;//------------------------------------------------------------------------- ;// End ;//-------------------------------------------------------------------------Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.