Upgrading NetWare Command Line Interface for the V2.7-x DELL PERC 2, PERC 2/Si, PERC 3/Si, & PERC 3/Di Controllers ReadMe ____________________________________________________________ This ReadMe provides instructions on how to upgrade the NetWare Command Line Interface (CLI) to the V2.7-x PERC 2 and integrated (PERC 2/Si, PERC 3/Si and PERC 3/Di) controllers, hereinafter referred to as the PERC 2 and/or integrated controllers. This software release support Netware Version and 5.X and 6.0. ____________________________________________________________ TABLE_OF_CONTENTS 1.0 Introducing the Product 2.0 Contents of the Kit 3.0 Upgrading the NetWare CLI from the local server 4.0 Upgrading the Netware CLI from a Windows client ____________________________________________________________ 1.0 Introducing the Product The PERC 2 and integrated family of controllers integrates advanced RAID technology with state-of-the-art controller hardware to deliver industry-leading performance, data availability, and storage management features. ____________________________________________________________ 2.0 Contents of the Kit The NetWare CLI for the controller this readme and A13NWAPP.ZIP ____________________________________________________________ 3.0 Upgrading the Netware CLI from the local server Follow the following steps to upgrade the CLI application on the Netware server. * From server console down the server * Unzip contents of the A13NWAPP.ZIP file to a temporary directory on the hard disk. * Bring up the server * From command console run load C:\temp\nwsetup.nlm (where C:\temp is the name of temporary directory where contents of A13NWAPP.ZIP file were unzipped in earlier steps) * Follow instructions on the screen from nwsetup.nlm ___________________________________________________________ 4.0 Upgrading the Netware CLI from a Windows client Follow the following steps to upgrade From a Windows client attached to the NetWare Server * Copy unzipped contents of the A13NWAPP.ZIP file to a directory on the server. Note: do not copy these files to sys:system directory * From command console run load directory path\nwsetup.nlm (where directory path points to the directory where contents of A13NWAPP.ZIP file were copied in earlier steps) * Follow instructions on the screen from nwsetup.nlmDownload Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.