######################################################################
DELL OPENMANAGE(TM) SERVER ADMINISTRATOR 1.7 README
######################################################################
NOTE: This readme provides information for Dell OpenManage Server
Administrator version 1.7.
This file contains updated information for your "Dell OpenManage Server
Administrator User's Guide" and any other technical documentation
included with Server Administrator.
NOTE: See the Dell OpenManage Install 3.7 readme (readme_ins.txt) on
the "Systems Management" CD for the latest installation information
and issues specifically related to Server Administrator.
NOTE: See the Dell OpenManage Array Manager readme (located in the
"am3xx" directory on the "Systems Management" CD) for supplemental
information regarding the Storage Management Service.
The Server Administrator documentation includes the "User's Guide",
"Messages Reference Guide", "CIM Reference Guide", "Command Line
Interface (CLI) User's Guide", "SNMP Reference Guide", and "Compatibility
Guide". You can access all the documentation from the product
documentation CD or from the Dell Support website at "support.dell.com".
This file contains the following sections:
* Criticality
* Minimum Requirements
* What's New in Version 1.7 of Server Administrator?
* What's Fixed in Version 1.7 of Server Administrator?
* Installation
* User Notes
* Known Issues
* History
######################################################################
CRITICALITY
######################################################################
3 - Optional
######################################################################
MINIMUM REQUIREMENTS
######################################################################
This section provides information about the minimum requirements for
installing and using Server Administrator.
======================================================================
"SYSTEMS MANAGEMENT" CD VERSION 3.7 SUPPORTED SYSTEMS
======================================================================
Server Administrator 1.7 is supported on "Systems Management" CD
version 3.7.
The following Dell(TM) PowerEdge(TM) systems are supported for "Systems
Management" CD version 3.7: 350, 500SC, 600SC, 650, 1400, 1400SC,
1500SC, 1550, 1600SC, 1650, 1655MC, 1750, 2400, 2450, 2500, 2550, 2600,
2650, 4400, 4600, 6400, 6450, 6600, 6650, and 8450.
The following Dell PowerVault(TM) systems are supported for "Systems
Management" CD version 1.2: 750N, 755N, 770N, and 775N. "Systems
Management" CD version 1.2 is preinstalled on version 2.3.7.0 of the
PowerVault NAS operating system.
======================================================================
SUPPORTED WEB BROWSERS
======================================================================
* Microsoft(R) Internet Explorer 5.5 (with Service Pack 2)
and 6.0 on Microsoft Windows(R) Server 2003, Windows 2000, and
Windows XP PRO
* Netscape Navigator 7.01, 7.02, and 7.1 on Windows 2000, Windows
Server 2003, and Windows XP and on Red Hat(R) Linux 9 and Red Hat
Enterprise Linux AS, version 2.1
* Mozilla 1.3, 1.4, and 1.5 on Red Hat Linux(R) 9 and Red Hat
Enterprise Linux AS, version 2.1
NOTE: When using Internet Explorer or Netscape Navigator on systems
running Microsoft Windows, to view localized versions of the RAC's
Web-based remote access interface, open the Windows "Control Panel",
double-click the "Regional Options" icon, and select the desired
locale from the "Your locale (location)" drop-down menu.
======================================================================
SUPPORTED RAC FIRMWARE
======================================================================
* On systems with a Remote Access Controller (RAC) installed, RAC
firmware version 3.0 or greater is required. The RACs include DRAC III,
DRAC III/XT, ERA, and ERA/O.
######################################################################
WHAT'S NEW IN VERSION 1.7 OF SERVER ADMINISTRATOR?
######################################################################
* Added support for a new operating system: Red Hat Enterprise Linux
(AS, ES, and WS), version 3.0.
* Added support for the following browsers for systems running Red Hat
Linux, version 9 or Red Hat Enterprise Linux AS, version 2.1:
*Mozilla 1.5
*Netscape Navigator 7.1
* Added the ability to update the following devices by using the Update
Service:
*PERC 2/SC driver
*PERC 2/DC driver
*PERC 4/SC firmware and driver
*PERC 4/DC firmware and driver
######################################################################
WHAT'S FIXED IN VERSION 1.7 OF SERVER ADMINISTRATOR?
######################################################################
======================================================================
WHAT’S FIXED IN THE DIAGNOSTICS SERVICE
======================================================================
* On Red Hat Linux operating systems, the floppy drive diagnostic was
still listed even though the floppy device was removed from the
system. The diagnostic would fail with the following message:
"DriveTest_12=Error reading:
Insert different formatted media and run this test again."
If this error still occurs, it may indicate a hardware problem.
* On Red Hat Linux operating systems, the memory diagnostic would fail
with the following message after being run several times consecutively:
"The test could not allocate enough memory to run: Verify the Virtual
Memory Paging file is larger than the total physical memory installed
in the system."
* The CERC ATA 100 (IDE RAID) LSI Raid Controller Timer Test is now available.
######################################################################
INSTALLATION
######################################################################
For complete installation instructions, see the Server Administrator
User's Guide.
######################################################################
USER NOTES
######################################################################
This section provides information to help enhance your experience with
Server Administrator in particular implementations and environments.
* If you run a security scanner tool (such as Nessus) against the Server
Administrator Web server, certain security warnings against port 1311
running the Server Administrator Web server might be displayed. The
following warnings have been investigated by Dell engineering and
determined to be "false positives" (invalid security warnings) that
you can safely ignore:
* "The web server on 1311 allows scripts to read sensitive configuration
and / or XML files." Dell has determined that this warning is a false
positive.
* "The web server on 1311 "allows to delete " / " which implies that the
web server will allow a remote user to delete the files in root on the
server." Dell has determined that this warning is a false positive.
* "The web server on 1311 might be susceptible to a 'WWW Infinite Request'
attack." Dell has determined that this warning is a false positive.
======================================================================
NOTES FOR THE INSTRUMENTATION SERVICE
======================================================================
* User-defined thresholds for backplane probes are reset to the default
values every time a reboot occurs on these PowerEdge systems: 2400,
2450, 2500, 2550, and 4400. Main board probes on these systems
retain the last user-defined values every time a reboot occurs.
* User-defined thresholds set under OMSA 1.1 become the default
thresholds after installing subsequent versions:
After you change the threshold value of a probe on a system running
OMSA 1.1 or earlier and then upgrade to OMSA 1.2 or later, the changed
threshold value becomes the default threshold value.
* When modifying the warning threshold settings, the values are stored
in the firmware as discrete integer values and scaled for display.
Not all values exist, causing the values to change when saved.
* CMOS Clear Operations for PowerEdge 2450 Systems:
For PowerEdge 2450 systems that are new or have undergone a CMOS
clear operation, the "Primary SCSI" setting is reported as "unknown"
or "off" even after setting the onboard SCSI controller to "ON" in
the BIOS setup. To ensure that the value is reported correctly, click
"Primary SCSI", set the state appropriately, and then click "Apply".
* Dell MIB Files for PowerEdge Systems:
Dell MIB files for PowerEdge systems allow customers to obtain and
verify information provided by supported software agents. The current
MIB files supported by PowerEdge software agents are located at
"\support\dcpemibs" on the "Systems Management" CD.
NOTE: A MIB-II-compliant, SNMP-supported network management station
is required to compile and browse the MIB files.
* Precompiled Kernels Supported by Server Administrator
With Prebuilt Device Drivers
-----------------------------------------------------
| Operating System | Kernel |
-----------------------------------------------------
| Red Hat Linux | 2.4.9-e.3 |
| Advanced Server 2.1 | 2.4.9-e.3smp |
| | 2.4.9-e.3enterprise |
| | |
-----------------------------------------------------
| Red Hat Linux | 2.4.21-4.EL |
| Advanced Server 3.0 | 2.4.21-4.ELsmp |
| | 2.4.21-4.ELhugemem |
-----------------------------------------------------
| Red Hat Linux 9 | 2.4.20-6 |
| | 2.4.20-6smp |
| | 2.4.20-6bigmem |
-----------------------------------------------------
* Having the glibc-kernheaders RPM for the running kernel installed prior
to installing Server Administrator is no longer a prerequisite for Server
Administrator to use its Dynamic Kernel Support feature.
======================================================================
NOTES FOR THE UPDATE SERVICE
======================================================================
* After starting the Update Service update process, do not navigate to other
pages or close the browser. Wait until you see a successful update message
before you navigate or close the browser.
* The Update Service is currently available only for the Microsoft
Windows operating systems supported by Server Administrator.
* PERC Device Types: PERC firmware and driver updates from the command
line require you to provide a "device" parameter (for example,
device=PERC3). The table below lists the device type that you should
use for the various PERC devices.
-----------------------------------------
|Device | Device Type |
-----------------------------------------
|PERC 3/DC | PERC3 |
|PERC 3/DCL | |
|PERC 3/QC | |
|PERC 3/SC | |
-----------------------------------------
|PERC 4/Di | PERC4Di |
|PERC 4/sc | PERC4 |
|PERC 4/DC | |
-----------------------------------------
|CERC | CERC |
-----------------------------------------
|PERC 2 | PERC2 |
|PERC 2/sc | |
|PERC 2/Dc | |
-----------------------------------------
|PERC 2/Si | ROMB |
|PERC 3/Si | |
|PERC 3/Di | |
-----------------------------------------
=======================================================================
NOTES FOR THE DIAGNOSTIC SERVICE
=======================================================================
* For a complete list of hardware devices that Server Administrator
diagnostics specifically supports, see the "Server Administrator
Compatibility Guide".
* Array Manager 3.5 or later is required to diagnose RAID attached
hard drives when using the Server Administrator Diagnostic Service.
If Array Manager 3.5 is not installed, the Elite RAID attached
hard-drive tests may not operate properly.
* When you upgrade from Server Diagnostics version 1.1 to the Server
Administrator Diagnostic Service, the history file is saved in the
"result.xml" file in the "\bak" directory located in the root
installation directory.
* When upgrading from Windows NT(R) 4.0 to Windows 2000, you receive
the following message when you install the Diagnostic Service:
"Report System Compatibility: Setup checks your computer for
compatibility with Windows 2000. The following items are not
compatible with Windows 2000. If you continue, you may not be able
to use these items, even after Setup is complete."
Ignore this message. If you continue with the upgrade, the
Diagnostic Service operates properly when the upgrade is
completed.
* Tape Diagnostics should not be run while the system is performing a
tape backup.
======================================================================
NOTES FOR THE REMOTE ACCESS SERVICE
======================================================================
* This service is supported on PowerEdge 650, 1600SC, 1650, 1750, 2600,
2650, 4600, 6600, and 6650 systems only. It enables remote access to
a server that has lost its network connection or that has become
unresponsive. In this release of Server Administrator, the Remote
Access Service uses one of the following remote access controllers
(RACs): Dell Remote Access Card (DRAC) III, DRAC III/XT, Embedded
Remote Access (ERA), or Embedded Remote Access Option (ERA/O).
* RACs also have their own command line interface that is accessed
through the racadm command. You can add racadm commands to a batch or
script file to automate various user tasks. To limit the stress load
on the managed system and RAC, you should add "sleep" or "delay"
commands of one or two seconds between the individual racadm commands.
######################################################################
KNOWN ISSUES
######################################################################
This section provides information on open issues with this release of
Server Administrator.
======================================================================
ISSUES FOR SERVER ADMINISTRATOR RUNNING ON ALL SUPPORTED OPERATING
SYSTEMS
======================================================================
* When running Server Administrator on a system with a Traditional
Chinese operating system, the Server Administrator pages are
displayed in Simplified Chinese. To view Server Administrator in
English, go to your browser language preference page and change
the language to English.
* When running Server Administrator on a system with a Simplified Chinese
or Japanese Operating System, the email attachments or update packages
must reside in a path containing non-localized characters.
* In Server Administrator, you must not open any saved log file (with
.zip extension) with the Windows Server 2003 or Windows XP embedded
"Compressed (zipped) Folder" utility. Open the file using WinZip or
a similar tool to view the complete content (text and images).
* On Mozilla version 1.2.1, after you configure Server Administrator to
send e-mail and when you click "Email" on any page, the 'To', 'Subject',
and 'Message' fields appear blank even though they are populated with
the correct text. The Server Administrator e-mail function works
correctly. This issue was not observed on Mozilla 1.0.x browsers.
* On the Server Administrator "Update" tab, if you select a package to update,
the "Select update package from:" field is blank. The update function
works correctly.
* After upgrading Red Hat Enterprise Linux 2.1 to Red Hat Enterprise Linux 3,
you must uninstall and reinstall Server Administrator to make it work.
* On Mozilla or Netscape browsers, if you go to the "System-> Auto Recovery"
page of Server Administrator, you must click anywhere on the page before
setting the "System Reset Timer (in Seconds)" value.
* On Mozilla browsers, the "Close Browser" button on the Server Administrator
logout page does not work. Use the browser window "exit" option to exit the
browser.
* Server Administrator does not support Novell(R) NetWare(R) version 5.1 running
with JVM version 1.2.2. If you are using Novell JVM version 1.2.2 for
NetWare, you must upgrade to version 1.3.1. Go to the Novell website at
www.novell.com to get the appropriate version of Novell JVM.
* After installation of Server Administrator on certain systems, a second
reboot may be required for updated BIOS settings to be properly displayed
by Server Administrator.
* PowerEdge 4600 systems with BIOS revisions A08 or higher cannot be
downgraded using Server Assistant Update Services. If you must downgrade
to an earlier BIOS versions, you must use the diskette method. BIOS
updates in diskette format are available from the Dell Support site at
"support.dell.com".
* If you import an invalid root certificate into Server Administrator
using "Preferences--> General Settings--> Web Server--> X.509 Certificate"
and try to log in to Server Administrator after restarting the Web Server,
you get a blank page.
To correct this issue, you must restore your original "keystore.db" file
before importing a valid root certificate. To restore the "keystore.db"
file, you must use both the basic operating system commands and the Server
Administrator Command Line Interface (CLI). Perform the following steps
from your operating system command line:
1. Type:
omconfig system webserver action=stop
This command stops the Server Administrator Web Server.
2. Locate the "keystore.db.bak" file. The default path is
"C:\program files\dell\openmanage\iws\config".
3. Rename "keystore.db.bak" to "keystore.db".
4. Type:
omconfig system webserver action=start
This command starts the Server Administrator Web Server.
* A temperature that drops below a minimum failure threshold does not cause a
system reset even if this alert action is set.
* A reporting error for the amount of memory enabled may exist for the
Level 2 (L2) cache memory when you view "Processors" for PowerEdge 6600
and 6650 systems. When you use the "Server Administrator System-->
Main System Chassis--> Processor interface" and click the connector name
for "Proc_n", where "n" can be from 1 to 4, depending on the number of
processors installed, the L2 cache may be displayed incorrectly as 256 KB.
If you purchased more than 256 K of L2 cache with your system, all of
the L2 cache you have installed is fully enabled. The reporting error
will be corrected in a future BIOS release for PowerEdge 6600 and 6650
systems.
* Clicking the browser "Back" and "Refresh" buttons may not display the
correct page with respect to the Server Administrator component tree,
tabs, or tab menus.
Example:
1. Click "Main System Chassis" under "System Component Tree".
2. Click "Fans" under "Main System Chassis".
3. Click "Alert Actions" on the tab menu bar.
4. Click the "Back" button on the browser.
This action takes you to the "Fan Probes" page, leaving the tab
menu bar unchanged. This action places the "Fan Probes" page
under "Alert Actions" on the tab menu bar instead of under
"Fan Probes".
* Selecting the boot sequence under the BIOS "Setup" tab does not
re-enable boot devices that have been previously disabled in
the System Setup Program.
* The links on the Server Administrator home page might lock up after
repeated random clicking. To resolve this situation, refresh the
browser by pressing <F5> or by clicking the browser "Refresh" button.
* All unsecure HTTP requests to Server Administrator receive an
invalid response. Server Administrator runs only one instance of
the Web server, which is secure. Make all connections through
https://<ip address>:<port number>. Any http://<ip address>:<port number>
request for connection with the server receives an invalid response.
* If the browser used with Server Administrator indicates that it
cannot display a page or perform an action, ensure that the browser
is in online mode. To go online, perform one of the following steps:
- If you are using Netscape Navigator, click "File" on the menu
bar, point to "Offline", and select "Work Online".
OR
- If you are using Internet Explorer, click "File" on the
menu bar and deselect the "Work Offline" option. When "Work
Offline" is selected, a check displays to the left of the option
on the "File" menu.
* If you are using Netscape Navigator and you receive the error
message "Netscape was unable to connect to the network because you
are offline...", Server Administrator is in offline mode. Go online
to avoid this message.
* If Internet Explorer prompts you to "Work Offline", "Connect", or
"Try Again", always select "Connect" or "Try Again". Do not select
"Work Offline".
* When setting dates in the "Asset Information" section of the Server
Administrator home page, the current time is appended to the date.
When setting dates with the Command Line Interface, the appended
time is noon.
* If Network Adapter Teaming is installed and enabled on your system,
Server Administrator does not display the IP address or other
connection-related data for the individual network adapters. The
connection status and IP address belong to the virtual adapter
created by the teaming software. The virtual adapter is not
currently displayed in Server Administrator.
* For systems running a supported Red Hat Linux operating system,
kernel driver messages such as "AAC_ChardevOpen" are sometimes
displayed in the console at the log in prompt. These messages
are displayed in the console when the driver initialization
is delayed by the installation of Server Administrator
services and can be safely ignored.
* Server Administrator uses port 1311 as default port. 1311
is a registered port number by Dell Inc. If another application
is configured to run on port 1311 before Server Administrator is
installed, the "Secure Port Service" won't be able to start when
the installation completes. Make sure that port 1311 is not being
used before installing Server Administrator.
* On some systems temperature probe values and settings are only supported
for whole degrees, not tenths of a degree. On these systems, setting a
fractional value for the minimum warning temperature threshold results in
the set value being rounded down to the next whole number value.
This behavior may cause the minimum warning threshold to have the same value as
the minimum failure threshold.
======================================================================
ISSUES FOR SERVER ADMINISTRATOR RUNNING ON ALL MICROSOFT WINDOWS
OPERATING SYSTEMS
======================================================================
* Execute all Server Administrator CLI commands from a 32-bit Windows
command prompt. Acceptable ways to access the 32-bit command prompt
are by clicking "Start-> Programs-> Accessories-> Command Prompt"
or by clicking "Start-> Run" and then typing "cmd.exe". Attempts to
run the CLI commands from the DOS command "command.com" may produce
unpredictable results.
======================================================================
ISSUES FOR SERVER ADMINISTRATOR RUNNING ON ALL NOVELL NETWARE
OPERATING SYSTEMS
======================================================================
* Perform the following steps before applying Service Packs to Novell
NetWare operating systems on systems with Server Administrator
installed:
NOTICE: Stop the Server Administrator Web Server before applying
Service Packs. Stopping the Server Administrator Web Server
unloads Java and stops all running Java applications.
1. Unload Java.
2. From the Novell NetWare command console, stop the Server
Administrator Web Server. Type:
DELL/OMANAGE/IWS/BIN/NETWARE/OMASTOP
* If you shut down Server Administrator on a system running NetWare
using the "sys:\system\dell\omanage\iws\bin\netware\omastop.ncf"
command, the shutdown script unloads the Java Virtual Machine on
the NetWare system. As a result, all applications using the Java
NetWare Loadable Modules (NLMs) are also shut down.
* When Server Administrator executes a "power cycle system" or "reboot
system" action, it sets the NetWare 6.5 power management setting,
"server power down options" to "off" so that these features behave
properly. To set this setting back to "on", you can execute
the command "set server power down options = on" on the system
console or add this command to "startup.ncf."
* When stopping Server Administrator by using DCSTOP at the command line,
error messages appear on the screen stating that some NLMs could not be
unloaded.
======================================================================
ISSUES FOR SERVER ADMINISTRATOR RUNNING ON THE NOVELL NETWARE 5.1
OPERATING SYSTEM
======================================================================
* When you log into Server Administrator for the first time on a
system running NetWare 5.1, the information displayed on the Server
Administrator home page might be incomplete. If this occurs, press
<F5> to refresh the browser window. Complete information for your
managed system should now be visible on the Server Administrator
home page.
* If you receive an "NDSComponentException" message while starting
Server Administrator, perform one of the following procedures:
- If the default certificate is corrupt or does not exist, see the
"Web Server and Security Setup" section of the "Server Administrator
User's Guide" to create a new certificate.
- If the hostname is not present in "client_properties.ini" and
"server_properties.ini", perform the following steps:
1. Open the "client_properties.ini" file in
"SYS:\system\dell\OpenManage\IWS\config".
2. Change "hostname" to your system name on the line
"nssl.keystore = certificate name - hostname".
3. Open the "server_properties.ini" file in
"SYS:\system\dell\OpenManage\IWS\config".
4. Change "certificate name" and "hostname" to your system name
on the line "nssl.keystore = certificate name - hostname".
* If you receive an "SSLComponentException" message while starting
Server Administrator, perform the following steps (not setting
"classpath" correctly to "SYS:\java\lib\nssl1.1_exp.jar" might be
a reason for this exception):
1. Ensure that "nssl1.1_exp.jar" or "nssl1.1_dom.jar" exists in the
"SYS:\java\lib" directory.
2. Set "classpath" to "SYS:\java\lib\nssl1.1_exp.jar" or
"SYS:\java\lib\nssl1.1_dom.jar" by typing one of the
following commands:
envset classpath=$classpath;SYS:\java\lib\nssl1.1_exp.jar
envset classpath=$classpath;SYS:\java\lib\nssl1.1_dom.jar
NOTE: If the previous solutions do not match your configuration,
see the Java SSL FAQ at "developer.novell.com" for solutions
that might match your configuration.
* When installing Server Administrator on Novell NetWare 5.1 with Java
Virtual Machine (JVM) 1.1.7B and Support Pack 3, you might receive a
"java.io" exception after you finish the installation and restart
the managed system. To correct this issue, go to the Novell support
website at "support.novell.com" and download the latest version of
JVM 1.1.7B dated after 07/23/2001. The TID number for this incident
on the Novell website is 10066646.
* If you are using the NOVONYX Web server in NetWare 5.1 with Server
Administrator, the Server Administrator Web server may stop
responding after some time. To avoid this behavior, ensure that
the NOVONYX Web server starts after the Server Administrator Web
server by performing the following steps:
1. Find the following line in the "AUTOEXEC.NCF" file:
NSWEB
This line starts the NOVONYX Web server.
2. Move this line to either the end of the "AUTOEXEC.NCF" file or
to another location that is after (below) the following line:
SYS:\SYSTEM\DELL\OMANAGE\IWS\BIN\NETWARE\OMASTART.NCF
This line starts the Server Administrator Web server.
* If you install Server Administrator on a system running NetWare 5.1
and Java 1.1.7B, the Server Administrator pages do not display
correctly in Netscape 6.1 or 6.2.
* If you install Server Administrator on a system running NetWare 5.1
and Java 1.1.7B, the Server Administrator service may hang if you
load ConsoleOne on the NetWare system. You must run the following
commands at the NetWare command prompt to restart the server after
you have exited from ConsoleOne:
SYS:\SYSTEM\DELL\OMANAGE\IWS\BIN\NETWARE\OMASTOP
SYS:\SYSTEM\DELL\OMANAGE\IWS\BIN\NETWARE\OMASTART
Server Administrator does not support Novell NetWare 5.1 running
with JVM version 1.2.2. If you are using Novell JVM version 1.2.2
for NetWare, you must upgrade to version 1.3.1. Go to the Novell
website at "www.novell.com" to download the appropriate version of
Novell JVM.
======================================================================
ISSUES FOR SERVER ADMINISTRATOR RUNNING ON RED HAT LINUX OPERATING
SYSTEMS
======================================================================
* After installing Server Administrator, you must reboot your system
for the BIOS settings to take effect.
* When using the Mozilla browser on Red Hat Linux operating systems,
the font and type size on the Server Administrator global navigation
bar appear different from the default font and type size that Server
Administrator uses.
======================================================================
ISSUES FOR INSTRUMENTATION
======================================================================
The following are open issues and workarounds, where available, for
Server Administrator on systems running Windows 2000, Windows Server
2003, Red Hat Linux, or Novell NetWare operating systems.
----------------------------------------------------------------------
INSTRUMENTATION ISSUES FOR ALL OPERATING SYSTEMS
----------------------------------------------------------------------
* The "Slots Information" pages in Server Administrator and
Dell OpenManage IT Assistant do not include the PERC 3/Di for the
PowerEdge 4400 or 4600 system even when the PERC 3/Di is present
on the system. The RAID controller is still functional and working
properly.
* The functionality of the watchdog timer feature cannot be guaranteed
in a case where a multi-bit error occurs in system DRAM Bank_1. If
an multi-bit error occurs in this location, it is possible for the
BIOS code resident in this space to become corrupted. Because the
watchdog feature utilizes a call to BIOS to effect the shutdown or
reboot behavior, it is conceivable that the feature will not work
properly in this instance. If this occurs, you must manually reboot
the system.
* The NIC configuration information within the Server Administrator
"BIOS Setup" screen may be inaccurate for embedded NICs. Using the
Server Administrator "BIOS Setup" screen to enable or disable
NICs might produce unexpected results. It is recommended that you
perform all configurations for embedded NICs through the actual
System Setup screen that is available by pressing <F2> while a
system is booting. This issue is present in the CLI interface and
in IT Assistant.
* If a system with spare bank memory enabled enters a "redundancy
lost" state, it may not be apparent which memory module is the cause.
If you cannot determine which DIMM to replace, see the "switch to
spare memory bank detected" log entry in the ESM system log to find
which memory module failed.
* Setting any warning threshold to a default value is not supported on
PowerEdge 1650, 2600, 2650, 4600, 6600, and 6650 systems. Attempting
to do so results in an error message.
* Warning thresholds that are modified on the following systems are
reset to their default values if the system is power cycled or loses
AC power: PowerEdge 1650, 2600, 2650, 4600, 6600, and 6650 systems.
If you change the warning threshold values and notice that they have
been reset to default values after a reboot, then you must add the
relevant "omconfig" commands to your system startup sequence. For
example, if you want to set the warning thresholds for fan zero to a
minimum of 1000 and a maximum of 5300, add the following command to
your startup sequence:
omconfig chassis fans index=0 minwarnthresh=1000 maxwarnthresh=5300
Ensure that the "omconfig" command is invoked after system services
have started. See the "Command Line Interface User's Guide" for more
information.
----------------------------------------------------------------------
INSTRUMENTATION ISSUES FOR WINDOWS 2000 AND WINDOWS SERVER 2003
OPERATING SYSTEMS
----------------------------------------------------------------------
* For both managed systems and network management stations running
Microsoft Windows 2003, you must configure the SNMP service to
accept SNMP packets. Microsoft Windows 2003 by default does not accept
SNMP packets from external hosts. To enable a Management Station
running the Windows 2003 operating system to receive SNMP packets
from a managed system, perform the following steps:
1. Right-click the "My Computer" icon.
2. Click "Manage", click "Services and Applications", and click
"Services".
3. Click the "SNMP Service".
4. Navigate to "SNMP Service Properties" and configure the service
to "Accept SNMP packets from Any Host".
* To use the Instrumentation Service SNMP Subagent with HP OpenView
Network Node Manager (NNM) Version 6.1, you must install the
HP OpenView consolidated patch that contains the NNM_00496 patch
on your system. To download the patch, go to the Hewlett-Packard
website at "www.hp.com".
* In some circumstances the Server Administrator CIM interface may
not be properly registered with the operating system and may not
function. To resolve this situation, perform the following steps:
1. Open a command prompt window.
2. Change to the installation directory, which is typically
"C:\Program Files\Dell\OpenManage\OMSA\bin".
3. Run the command "regsvr32 dccim32.dll".
* On systems running Windows 2000, a conflict symbol appears in the
Windows Device Manager "Resource" tab for dcesm (instrumentation driver).
NOTE: The conflict symbol is the red circle with a slash through it.
This conflict symbol indicates an I\O address range conflict
with RAC "PCI Function 2". It does not indicate any problems
with the functionality of the instrumentation driver.
----------------------------------------------------------------------
INSTRUMENTATION ISSUES FOR RED HAT LINUX OPERATING SYSTEMS
----------------------------------------------------------------------
* "Current Speed" and "Minimum Failure" are the only valid fan threshold
values for storage systems attached to managed systems running a Red Hat
Linux operating system. All other values are displayed as "unknown".
* PowerVault 20xS, 21xS, and 22xS storage systems attached to managed
systems running a Red Hat Linux operating system cannot be managed by
Server Administrator using the following RAID controllers:
- PERC 2
- PERC 2/Di
- PERC 2/Si
- PERC 3/Di
- PERC 3/Si
----------------------------------------------------------------------
INSTRUMENTATION ISSUES FOR NOVELL NETWARE OPERATING SYSTEMS
----------------------------------------------------------------------
* On managed systems running a Novell NetWare operating system, users must
manually disable the watchdog timer feature prior to issuing a "restart
server" or "down" command. Otherwise, the watchdog will timeout,
resulting in a reboot or power down, depending on the watchdog's
selected behavior.
* The Instrumentation Service might incorrectly report NetWare version
5.1 as version 5.0.
* On managed systems running a Novell NetWare operating system, the
Instrumentation Service loads multiple NLMs at system startup. Some NLMs
are automatically uninstalled because they are not required on a
particular system. The process for uninstalling the NLMs occurs
approximately 2 minutes after you boot the system. During this uninstallation
process, a module unloading message appears on the Novell NetWare system console.
* After installing the Instrumentation Service, the user reboots the
system to make the newly installed managed system services available
for use. While rebooting, the system might hang if Adaptec CI/O
management software is installed.
To avoid a hung system during reboot, perform the following steps:
1. Remove "dcstart.ncf" from "autoexec.ncf".
2. After the system reboots, run "dcstart.ncf" from the NetWare
command line.
NOTE: Adaptec CI/O is not supported on NetWare 6.0. When upgrading a
system from NetWare 5.x to NetWare 6.0, uninstall Adaptec CI/O
before upgrading the operating system.
======================================================================
ISSUES FOR DIAGNOSTICS
======================================================================
The following subsections list the currently known issues regarding
implementation and operation of the diagnostic tests offered in
Server Administrator.
----------------------------------------------------------------------
ISSUES FOR ALL OPERATING SYSTEMS
----------------------------------------------------------------------
*If you are using Server Administrator on a system that is completely
isolated on a network (cannot ping any other systems), you may
experience performance problems and may receive inconsistent results
from the Diagnostics Service if the "Automatically detect settings"
checkbox is selected in the Local Area Network proxy settings page of
Internet Explorer and your version of Internet Explorer is earlier
than 5.5.
To correct this issue, deselect the "Automatically detect settings"
checkbox.
* After running a diagnostic test that requires a high percentage of
processor resources, you may experience slow browser response time
in Netscape 6.2.x. To restore normal browser response time, you must
end the Netscape 6.2.x browser process. On systems running Red Hat
Linux, locate the process ID for "netstat" and type the "kill -9"
command followed by the process ID number. On systems running a
Windows operating system, open the "Task Manager" by pressing
<Ctrl><Alt><Del>, select "Netscp6.exe", and click "End Task".
* The "Diagnostic Service" tab is not available in Server Administrator
and is not listed on the "Health" page at startup. The Diagnostic
Service waits for the Server Administrator service to start completely
before enumerating (scanning system for available devices to diagnose).
If you press <F5> to refresh, the "Diagnostic Service" tab displays
when enumeration is complete. This process can take several minutes on
some systems. The “Diagnostic Service Link” does not work until the
“Diagnostic Service” tab is displayed.
* If your hard drive becomes full (no space left) and you run diagnostics
on the managed system, Server Administrator does not show progress for
the running diagnostics; instead, you see a blank page. You cannot
cancel the tests because the blank page is shown instead of the progress
page with the "Abort" button. To correct this issue, you must free up
some space on your hard drive, reboot the server, and run the
diagnostics again.
----------------------------------------------------------------------
ISSUES FOR WINDOWS OPERATING SYSTEMS
----------------------------------------------------------------------
* If the Yosemite Tapeware application is installed on your system, the
Diagnostic Service cannot discover and run diagnostics on IDE tape
drives. To correct this problem, perform the following steps:
1. Locate the TapeWare configuration file. The default location is
"C:\Program Files\TapeWare\TapeWare.ini".
2. Find the section in the file called "Configuration".
3. Add the following line to the "Configuration" section.
releaseWhenUnused=Yes
4. Save the "TapeWare.ini" file, and reboot the system.
* After installing the Server Administrator Diagnostic Service, errors
are logged in the Event Viewer System Log by the Removable Storage
Service. These entries are logged because the Diagnostic Service must
stop the Removable Storage Service to be able scan the system for tape
devices on which to perform diagnostics.
* When logged into the Server Administrator home page using Microsoft
Internet Explorer on a system running a supported Windows operating
system, the browser might shut down unexpectedly during lengthy
diagnostics tests. If this happens, press <Ctrl><Alt><Delete>, click
"Task Manager", select the browser item, and click "End Task". Log
back into Server Administrator to continue the diagnostics tests.
----------------------------------------------------------------------
ISSUE FOR RED HAT LINUX OPERATING SYSTEMS
----------------------------------------------------------------------
* Under certain combinations of conditions, you must restart the
omawsd service by typing "omawsd restart" at the command prompt.
The conditions are as follows:
- After running a diagnostic test, the result that displays is a
red X, indicating failure for that test.
- When you click the details link the "Test Result:" field is blank.
- The "Result Details:" field displays "The test operation completed
successfully."
If you see any combination of these conditions, restart the omawsd
service.
======================================================================
ISSUES FOR REMOTE ACCESS
======================================================================
NOTE: The Remote Access Service is supported on PowerEdge 650, 1600SC,
1650, 1750, 2600, 2650, 4600, 6600, and 6650 systems only.
The following subsections list the currently known issues regarding
implementation and operation of your RAC and the Remote Access Service
in Server Administrator.
----------------------------------------------------------------------
Remote Access Dial-Up Settings
----------------------------------------------------------------------
If you change a DRAC III modem "Dial Mode" setting to "Tone" or "Pulse"
using Server Administrator, IT Assistant displays the opposite setting.
----------------------------------------------------------------------
ISSUES FOR ALL OPERATING SYSTEMS
----------------------------------------------------------------------
* If the RAC configuration is reset to factory defaults using the
"racadm racresetcfg" command, the RAC configuration tab in Server
Administrator does not reflect the reset configuration settings until
the system is rebooted. Also, the RAC configuration page in Server
Administrator cannot be used to make any configuration changes
until the system reboots.
* The RAC does not support local RAC user IDs with special characters.
When adding a local RAC user, use only alphanumeric characters for
the user name.
* While the RAC is resetting, the Instrumentation Service cannot
read sensor data for certain systems. As a result, the voltage,
temperature, and other probes may not be visible on the Server
Administrator homepage until the RAC has completed resetting.
* The RAC may not send traps when your system is locked up. To enable
traps to be sent when the system is locked up, you must configure
the watchdog timer using the Server Administrator GUI. In the Server
Administrator GUI, click the "Properties" tab and ensure that
"Auto Recovery" is selected. The default value of the "Action On
Hung Operating System Detection" setting is "None". "None" indicates
that detection will not be performed.
* RAC firmware versions 2.0–3.0 do not support passwords with special
characters (non-alphanumeric) only for RAC user IDs logging in using
the Web-based interface (with Local RAC Authentication). If you created
RAC user IDs using previous versions of the firmware or if you created
user IDs using Server Administrator that is running version 2.0 firmware
on the managed system, you cannot log into the RAC.
Use one of the following four methods to correct this issue:
- Change your passwords before updating the firmware.
OR
- Use the following CLI command to change the password:
omconfig rac users username=xx userpassword=yy
where "xx" is the original userid and "yy" is the new password
OR
- Change the password through Server Administrator using the "User" tab.
Ensure that the check box to change the password is checked. Enter a
new password, and then enter it again to validate the change.
OR
- Use the racadm utility to change the password:
racadm config -g cfgUserAdmin -o cfgUserAdminPassword -i
<usr_index> <new_pwd>
where <usr_index> is the index of the user database entry to be modified
and <new_pwd> is the new password
This issue will be corrected in a later release of the firmware.
* Depending on your network and proxy configurations and whether you are using
Netscape Navigator or a Mozilla browser, you may need to enter the exact IP
address of the RAC controller you are trying to access in the "No Proxy for"
field of your browser.
Perform the following steps:
1. Open your Netscape Navigator or Mozilla browser.
2. Click "Edit".
3. Click "Preferences ...".
4. Click "Advanced" in the left sidebar.
5. Click "Proxies" in the left sidebar.
6. Enter the RAC IP address in the "No Proxy for:" field.
7. Click "OK" and then close the browser.
* The "racadm getconfig -f <filename>" and "racadm config –f <filename>"
commands fail if the firmware version of the RAC controller is 1.x. Use
either the "config -g <groupName>" or "getconfig -g <groupName>"
command to avoid this issue.
* If the out-of-band RAC user interface was spawned off from
the Server Administrator console with a Mozilla
browser, strings with extended ASCII characters may not show up
correctly on certain languages. This is because of the fact that the
browser is set to UTF-8 character set by Server Administrator.
To correct this issue, change the browser character coding to
ISO-8859-1. On Japanese and Chinese, UTF-8 is the correct encoding for RAC pages.
----------------------------------------------------------------------
ISSUES FOR WINDOWS OPERATING SYSTEMS
----------------------------------------------------------------------
* Applications that use InstallShield 3.x to install software may take
longer to install if RAC Services are running. To reduce the software
installation time, stop RAC Services before performing the installation.
You must restart RAC Services after the installation is complete.
* Due to functional details that are specific to Windows Dynamic DNS
servers, the RAC internal PPP IP address is broadcast to the Dynamic
DNS service on servers running Windows 2000. The Dynamic DNS
service stores that particular IP address in its DNS lookup table and
associates it with the name of the system that hosts the RAC. This
action causes problems with Active Directory under Windows. The
default value for a RAC's internal PPP IP address is 192.168.234.235,
but the address can be changed by the user. This issue is a known
problem, and there is an article and a hot fix available from Microsoft.
The Knowledge Base article number is Q292822. Downloading the
hot fix and implementing the steps in the article solves the problem.
* The mouse movement on a local system may appear jerky and erratic
during console redirection. This behavior is evident especially when
using menus or opening windows, and applies to the Remote Access
Service running on Microsoft Windows operating systems only.
* If you used the "Systems Management" CD version 3.1 or earlier to
install RAC management station software on any system running a Windows
operating system, you must remove any previous versions of the RAC
management station software before installing a later version of the
RAC management station software.
To remove the RAC management station software on Windows, perform the
following steps:
1. Insert the "Systems Management" CD into the CD drive.
2. When the installation application starts, click "Exit".
3. Open a command shell window:
a. Click the "Start" button, and then click "Run".
b. In the "Run" dialog box, type the following command and then
press <Enter>:
cmd
4. Start the Install Shield uninstallation program to remove software:
a. In the command shell window, type the following line (replacing
x: with the actual drive letter of your CD drive, such as d:):
x:\rac20\mtpkg\setup.exe
b. Select "Remove", and then click "Next".
c. Click "OK".
d. Click "Finish".
5. Close the command shell window.
* To launch the RAC Web console from IT Assistant, you must run one
of the patches located on the "Systems Management" CD in the
"\support\Windows\RAC" directory. For systems running IT Assistant
on any Windows operating system, use the "Win2KPatch.reg" file.
To apply the patch, browse to the CD directory mentioned above and
double-click the file name. Click "YES" and "OK" on the next two
message boxes. The patch enables the Java Console in Internet Explorer.
* The Internet Explorer application embedded in the Windows Advanced
Server Limited Edition operating system does not support Java
applets; therefore, it is not possible to use the Advanced Server
Limited Edition's Internet Explorer browser to connect to a RAC
over a local area network (LAN) or the Internet.
* CONNECTING TO THE INTERNET IF THE RAC PPP SERVICE IS RUNNING
After installing Internet Explorer 5.0 or later, you may notice that
the automatic configuration and proxy setting information for each
connection is separate from the same information used for the LAN
connection. If you have both a dial-up and a LAN connection at the
same time, Internet Explorer may block your access to the Internet.
This blocking occurs because each connection in Internet Explorer
5.0 uses its own automatic configuration and proxy settings. When
this occurs and a user tries to establish any kind of PPP connection,
Internet Explorer attempts to use the dial-up connection settings to
access the Internet.
You can find additional information about this issue in article Q236920,
"Connections No Longer Use LAN Automatic Configuration and Proxy
(Q236920)in the Microsoft Knowledge Base at "support.microsoft.com".
- To correct this problem, you must apply Microsoft IE HotFix 818060
to either Internet Explorer 5.01 SP2 or 6.0 SP1. HotFix 818060 is
available on the Systems Management CD in the \support\Windows\HotFix
directory. Please refer to the following Microsoft support article
for further instructions with applying this HotFix:
http://support.microsoft.com?kbid=818060
* To launch the RAC Web console from IT Assistant, you must run one of
the patches located on the "Dell OpenManage Systems Management" CD
in the "\support\Windows\RAC" directory. If you are running IT Assistant
on any Windows operating system (Windows NT is not supported), use the
"Win2KPatch.reg" file. To apply the patch, browse to the CD directory
previously mentioned and double-click the filename. Click "Yes" and "OK"
in the next two message boxes. The patch enables the Java Console in
Internet Explorer.
* On systems running Windows, the RAC installation process requires a
virtual modem connection named RACPORT to communicate between the
operating system and the RAC controller. When any modem is added to
the system, the operating system automatically creates a virtual fax
device icon in the printers folder. The fax icon is not used by the
RAC and can be deleted or ignored.
* The mouse movement on a local system may appear jerky and erratic
during console redirection. This behavior is evident especially when
using menus or opening windows.
* Resizing the Windows desktop to a resolution of 640 x 480 causes
some information to not be visible in the browser window when using the
RAC Web-based interface. This issue occurs in both Netscape
Navigator and Internet Explorer. To view a screen in its entirety
when using a resolution of 640 x 480, you must enlarge the browser
window.
* On systems running Windows 2000, a conflict symbol appears in the
Windows Device Manager "Resource" tab for RAC "PCI Function 2".
NOTE: The conflict symbol is the red circle with a slash through it.
This conflict symbol indicates an I\O Address Range conflict
with dcesm (Instrumentation driver). It does not indicate any problems
with the functionality of the Remote Access Controller.
----------------------------------------------------------------------
ISSUES FOR RED HAT LINUX OPERATING SYSTEMS
----------------------------------------------------------------------
* When installing the Dell OpenManage systems management applications
through the Nautilus File Manager, you must use the "Run" button and
not the "Run In Terminal" button after choosing the "start.sh" script
from the File Manager's file list. Use the "Run In Terminal" button
for applications that do not open a window of their own (the "start.sh"
script opens its own window). If you choose "Run In Terminal", you
must restart the "racvnc" service after installing Dell OpenManage
systems management applications by typing the following command:
service racvnc restart
* When using Console Redirection on a managed system running Red Hat
Linux, the focus (cursor moved back over an object) follows the cursor.
Occasionally, the text windows in Console Redirection loses focus.
Before attempting to type in a text window in a Console Redirection
window, click the mouse in the text window's spacebar or top menu bar
to ensure that your target text window has the focus on the correct
window or application that you are attempting to use.
----------------------------------------------------------------------
ISSUES FOR NOVELL NETWARE OPERATING SYSTEMS
----------------------------------------------------------------------
* When a remote "Reset", "Power Off", or "Power Cycle" is issued through
the RAC on NetWare, some NetWare applications may require user
interaction to close application windows. If this is necessary, you
should use the RAC console redirection to manually close the
application windows to allow NetWare to shutdown.
* During normal operation of the DRAC III managed system under
NetWare 5.1 and NetWare 6.0, the operating system periodically
displays the following messages:
"LCP is down: **PPP did not receive a response from peer for several
Echo-Requests sent**"
"Call disconnection for protocol IP to destination RAC3. The event
occurred due to a link failure."
These messages do not indicate errors. They are generated when the
RAC PPP connection is temporarily unavailable (the connection
may be unavailable when the card is reconfigured or new users are
added). The PPP connection is automatically reestablished, and no
user action is required. Therefore, the user should not attempt to
manually re-establish the connection.
======================================================================
ISSUES FOR UPDATE SERVICE
======================================================================
* When performing a RAC firmware update, make sure that you launch the
update process from a single browser instance. If an update is
performed from two different browsers at the same time, the update
will fail.
* Do not close your browser during an update process. If you close
your browser while an update process is in progress, the update will
fail. You must reboot your system before starting the update again,
or the update process will continue to fail.
* On systems equipped with DRAC III/XT, make sure you have installed
the Remote Access Service software before attempting to perform a
firmware update. To carry out updates on these systems, navigate to the
"Update" tab and proceed from there.
======================================================================
POWEREDGE 7150 SYSTEM ISSUES
======================================================================
* The "racadm" command-line utility is supported on PowerEdge 7150
managed systems. However, when using the utility on these systems,
the primary command is "drscadm" instead of "racadm". For more
information on using the "drscadm" utility on PowerEdge 7150
systems, see the "Dell OpenManage Remote Service Card User's Guide"
on the Systems Management documentation page on the Dell Support
website at "support.dell.com".
######################################################################
HISTORY
######################################################################
This section provides historical information about the new features
and fixes that were implemented in previous versions of Server
Administrator.
**********************************************************************
SERVER ADMINISTRATOR, VERSION 1.6
**********************************************************************
======================================================================
WHAT WAS NEW IN VERSION 1.6 OF SERVER ADMINISTRATOR?
======================================================================
* Added Novell Netware 6.5 as a supported operating system.
* Discontinued Novell Netware 6.0 as a supported operating system.
* Added the "Export" feature, which generates a text file that lists
the values for each data field on the open Server Administrator window,
separated by a delimiter you can customize, and saved to a location
you specify.
======================================================================
WHAT WAS FIXED IN VERSION 1.6 OF SERVER ADMINISTRATOR?
======================================================================
----------------------------------------------------------------------
DIAGNOSTIC SERVICE
----------------------------------------------------------------------
* On the Dell PowerEdge 2600 with Windows, running "Tape Drive"
diagnostics on the DLT VS160 tape drive failed in the previous release.
* On the Traditional Chinese and Japanese versions of the Windows Server
2003 operating system, an error would appear after rebooting the
system or restarting the "Secure Port Service." The error originated from
"EliteDiag.exe" which is part of the Diagnostic Service. However, the
functionality of the diagnostics was not affected by this error.
* The option to format the CLI omdiag output in custom delimited format (cdv)
did not function properly.
* For PowerEdge 8450 systems with 8 processors installed and for PowerEdge
6400, 6450, 6600, and 6650 systems with 4 processors installed and running
with hyper-threading ON, the CPU Math Register Test would fail with "Test
process exited abnormally".
----------------------------------------------------------------------
REMOTE ACCESS SERVICE
----------------------------------------------------------------------
* The RAC Managed Node version was not showing up in NetWare on the
"System Summary" page.
* On systems running a supported Red Hat Linux operating system, some
folders and log files relating to the Remote Access Service were left on the
system’s hard drive after an uninstall of Dell OpenManage software
* Some of the racadm CLI options for "getraclog" were not working correctly.
* The racadm CLI command "omconfig rac snmptraps" was not allowing the
same IP address to be entered multiple times for SNMP traps.
* On systems running a supported Windows operating system, some temporary
files were remaining in the system after a RAC firmware update using Dell
Update Packages.
* Incorrect help pages were linked to some Remote Access Service pages.
**********************************************************************
SERVER ADMINISTRATOR, VERSION 1.5
**********************************************************************
======================================================================
WHAT WAS NEW IN VERSION 1.5 OF SERVER ADMINISTRATOR?
======================================================================
This release adds operating system support for Windows 2000
Service Pack 4.
======================================================================
WHAT WAS FIXED IN VERSION 1.5 OF SERVER ADMINISTRATOR?
======================================================================
----------------------------------------------------------------------
DIAGNOSTIC SERVICE ON WINDOWS OPERATING SYSTEMS
----------------------------------------------------------------------
* On PowerEdge 350 systems, issues with the "Serial Port Data Send
and Receive Test" and the CD diagnostics have been corrected.
* Running "Tape Drive" diagnostics on the DLT VS160 tape failed in the
previous release.
----------------------------------------------------------------------
DIAGNOSTIC SERVICE ON RED HAT LINUX OPERATING SYSTEMS
----------------------------------------------------------------------
* The "CD-RW Read Write Test" failed in the previous release
when running the diagnostic with a CD-RW that was not blank. The
following error was generated: "Error erasing the disc - SCSI Error
2900."
* USB diskette and USB CD drives were not identified properly by the
diagnostics.
* Running the "USB Status Test" in "Run Simultaneously" mode produced
a failed result and sometimes caused the online diagnostics to hang.
----------------------------------------------------------------------
REMOTE ACCESS SERVICE
----------------------------------------------------------------------
* Corrected an issue in which the Server Administrator CLI did not
allow you to set the country code for a RAC modem. The "Country Code"
field has been added. See "DOCUMENTATION NOTES FOR SERVER
ADMINISTRATOR COMMAND LINE INTERFACE USER'S GUIDE" later in this
readme for information about using the "Country Code" field.
* Corrected an issue in which you were unable to use the input field or
"Browse" button to upload a security certificate in Mozilla 1.2.1.
* Corrected an issue in which the Server Administrator CLI output an
incorrect error message when creating a "dialinuser" with a user name
longer than 15 characters.
* Corrected an issue in which the "Upload Certificate" feature for the
"Security" tab in the ERA/O controller may result in the following
error when running NetWare 6.0: "Error! File does not exist in the
path specified." If the signed certificate file exists in the path
specified, it can now be uploaded. If the file does not exist in the
path, an error message displays.
* Corrected an issue found when viewing the details of the RAC SSL
server certificate in Server Administrator or the CLI, in which a RAC
SSL server certificate is falsely identified as a Certificate
Authority (CA) certificate. This correction fixed the following two
issues: "View Server Certificate" links you to the wrong type of
certificate; and in the OMSA CLI, the "omreport rac viewcertificate
type" command output the wrong value for "type".
* Corrected an issue in the Server Administrator GUI in which setting
"Severity Configuration" on SNMP traps caused JavaScript errors.
* Corrected an issue that caused an error stating that the page could
not be displayed when uploading a RAC SSL certificate in Server
Administrator using Internet Explorer on systems running Windows
Server 2003.
* Corrected an issue in which the Server Administrator "RAC Users" page
allowed only 8-character passwords in the text field. The maximum
number of characters allowed in the user password has been increased
from 8 to 63 characters when adding or configuring RAC users in Server
Administrator.
* Corrected an issue in which you were unable to retain a custom message
in the "Alpha-Numeric Paging" settings. The custom message for alphanumeric
pages was limited to 31 characters when adding or configuring RAC users in
Server Administrator.
* Corrected an issue in which the RAC "Generate a New CSR" function of the
Server Administrator Web-based interface did not work when Red Hat Linux 9
runs on the managed system.
* Corrected an issue in which adding a RAC user from the Server
Administrator interface overwrote an existing user if the new user had
the same user name or index as the existing user.
----------------------------------------------------------------------
UPDATE SERVICE ON WINDOWS 2003 OPERATING SYSTEM
----------------------------------------------------------------------
* Corrected an issue that occurred when attempting to validate any
update package. A message indicated that the page could not be
displayed. The message no longer appears, and the validation
process continues properly. If you observe a similar issue, see the
Microsoft Knowledge Base article 822753 for more information.
######################################################################
Information in this document is subject to change without notice.
(C) 2004 Dell Inc. All rights reserved.
Reproduction in any manner whatsoever without the written permission
of Dell Inc. is strictly forbidden.
Trademarks used in this text: "Dell", "PowerEdge", "PowerVault", and
"Dell OpenManage" are trademarks of Dell Inc.; "Microsoft", "Windows",
and "Windows NT" are registered trademarks of Microsoft Corporation;
"Novell" and "NetWare" are registered trademarks of Novell, Inc.;
"Red Hat" is a registered trademark of Red Hat, Inc.
Server Administrator uses the OverLIB JavaScript library. This
library can be obtained from www.bosrup.com.
Other trademarks and trade names may be used in this document to refer
to either the entities claiming the marks and names or their products.
Dell Computer Corporation disclaims any proprietary interest in
trademarks and trade names other than its own.
January 2004
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.