NW312.TXT Driver File Contents (dfe530tx.zip)

        D-Link DFE-530TX PCI Fast Ethernet Adapter Installation
                  for the NetWare Server 3.12 Driver

    - Compatibility List
    - Getting Started

 Compatibility List
      Because this driver follows Novell ODI Driver Specification
      version 3.3, the NetWare version 3.12 NetWare server must be
      patched to work with this driver. The patching method is
      described as below:

       1. Copy LOADER.EXE and LSWAP.EXE to the NetWare 3.12 server

       2. Execute LSWAP.EXE at MS-DOS prompt from server directory.

          Usage: LSWAP [loaderFilePath [serverFilePath]]
                 Default loaderFilePath = C:\NWSERVER\LOADER.EXE
                 Default serverFilePath = C:\NWSERVER\SERVER.EXE

        PS. Both LSWAP.EXE and LOADER.EXE files provide by Novell.

 Getting Started

    Modifying an existing NetWare 3.12 Server
       1. Make a sub-directory NLMS.OLD under <SRVPATH> directory which
          include SERVER.EXE.

          Ex. <SRVPATH> = SRV312
              >MD \SRV312\NLMs.OLD

       2. Save NBI31X.NLM, MSM31X.NLM and ETHERTSM.NLM to NLMS.OLD

       3. Please insert release driver diskette into floppy disk.

       4. Copy all provided NLM and LAN files into your dos directory
          which include SERVER.EXE.

          Ex. >COPY A:\NETWARE\32BITLAN\NBI31X.NLM   C:\SRV312
              >COPY A:\NETWARE\32BITLAN\MSM31X.NLM   C:\SRV312
              >COPY A:\NETWARE\32BITLAN\DLKFET.LAN   C:\SRV312

       5. Start the NetWare Server.

          > CD \SRV312
          > SERVER

       6. From the Novell Server side, execute "LOAD INSTALL". Type:
          :LOAD INSTALL
           Select <System Option>
           Select <Edit Autoexec.NCF file>

       7. Add below item into the server's AUTOEXEC.NCF file.

          LOAD C:\SRV312\NBI31X.NLM
          LOAD C:\SRV312\MSM31X.NLM

          LOAD C:\SRV312\DLKFET SLOT=1 FRAME=Ethernet_802.3
          BIND IPX DLKFET_1_E83 NET=xxxx

          LOAD C:\SRV312\DLKFET SLOT=1 FRAME=Ethernet_802.2
          BIND IPX DLKFET_1_E82 NET=xxxx

          LOAD C:\SRV312\DLKFET SLOT=1 FRAME=Ethernet_II
          BIND IPX DLKFET_1_EII NET=xxxx

          LOAD C:\SRV312\DLKFET SLOT=1 FRAME=Ethernet_SNAP
          BIND IPX DLKFET_1_ESP NET=xxxx

       8. Restart the server again.

       Parameters supported by the DLKFET.LAN driver

       SLOT     1      - Forces the driver to search for the specified board

       AUTOSENSE       - This keyword configures the adapter to conduct
                         NWay Auto-negotiation to determine the network
                         speed and the duplex mode of the network connection.

       10BASET         - Force driver to 10Mbps half duplex mode.

       10BASETFD       - Force driver to 10Mbps full duplex mode.

       100BASETX       - Force driver to 100Mbps half duplex mode.

       100BASETXFD     - Force driver to 100Mbps full duplex mode.

Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.40