D-Link DE-650 Ethernet PC Card Installation for SCO UNIX LLI Driver Introduction ÍÍÍÍÍÍÍÍÍÍÍÍ Getting Started will describe the installation instructions. Because the UNIX does not support the PCMCIA Card Service, so the adapter driver will enable the PCMCIA controller directly. It only supports the Intel PCIC compatible chipset. Getting Started ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ This installation procedure applies to SCO UNIX LLI drivers with TCP/IP v.1.2x. NOTE: Commands in UNIX are case-sensitive, thus, those in upper-case will be treated differently from those in lower-case. Login to the UNIX as super user. Login: root Password: xxxxxx ( keyin the password of root ) Insert the driver diskette in Drive A or Drive B and use the doscp command to copy the SCOUNIX Driver into the UNIX directory. Type: # cd / # doscp a:/scounix/setup65s /setup65s (or # doscp b:/scounix/setup65s /setup65s) # chmod +x /setup65s # ./setup65s a: (or # ./setup65s b:) Add a chain by executing the following command: #netconfig A menu similar to the following appears on the screen: 1) Add a chain 2) Remove a chain 3) Reconfigure an element in a chain q) Quit Select option 1 "Add a chain". The following prompt appears on the screen: Select top level of chain to Add or q to quit: Type sco_tcp for SCO TCP/IP for UNIX. The following message appears: Select next level of chain to Add or q to quit: Select d65e0. This value varies according to the card number. The following prompt appears: Add chain sco_tcp->d65e0 (y/n): Type "y" for yes. Installing the driver into the link kit The Message display: .Enter IRQ (3,4,5,9,10,11,15) [5] or 'q' to quit: .Enter I/O base address (300..360) [300] or 'q' to quit: .Enter RAM base address (c0000..ec000) [d0000] or 'q' to quit: .Enter PCMCIA Slot Number (0,1) [0] or 'q' to quit: Answer the question accordingly. Type [Enter] means using default This message then appears: Enter the internet address of this interface: Specify the internet address of the interface. The following message appears: Enter the netmask for this interface: Specify the subnet mask for the interface. Default mask is 255.255.255.0. The following message appears on the screen: Does the interface use a broadcast address of all 1's (y/n): Answer this question accordingly. Default is "y". The following then appears: Enter the broadcast address for this interface: Type in the broadcast address for the interface. The program asks: Are these values correct ? (y/n) If you think all values specified are correct, type "y". Otherwise, answer "n" and repeat the process. The following message appears on the screen: XX Pseudo ttys are currently configured, do you want to: 1) Add Pseudo ttys 2) Remove Pseudo ttys Select an option or enter q to quit [q] Type "q". The main menu reappears on the screen: 1) Add a chain 2) Remove a chain 3) Reconfigure a element in a chain q) Quit Select option: Select "q". The following message appears on the screen: Do you want to relink to kernel now ? Type "y" for yes. The following appears: Do you want this kernel to boot by default (y/n) Type "y" for yes. The following message appears on the screen: Do you want the kernel environment rebuilt (y/n) Type "y" for yes. Reboot UNIX by typing the following: # shutdown -y -g0 Further Information ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ You can retrieve statistical information via the #netstat -i command. Executing this command displays a screen similar to the following: Name Mtu Network Address Ipkts Ierrs Opkts Oerrs Collis d65e0 1500 192.9.200 unix2 423 0 423 0 0 lo0 2048 170.23 localhost 180 0 180 0 0Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.