D-Link DE-650 Ethernet PC Card Installation
for SUN PC-NFS V5.0
Introduction
ÍÍÍÍÍÍÍÍÍÍÍÍ
This installation assumes that the PCMCIA drivers are working
properly. Please consult INST_DOS.TXT for help with PCMCIA
Drivers. Getting Started will describe the installation for
PCNFS.
Getting Started
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
Note: If an NDIS driver is preferred please see
\NDIS\PCNFS.TXT or a packet driver \PKTDRV\PCNFS.TXT.
ODI Driver
ÄÄÄÄÄÄÄÄÄÄ
When using PC-NFS concurrently with NetWare 3.1x/4.0, select the
"ODI" option from the PC-NFS installation screen. This option
works with the ODI driver included in the provided driver diskette
. Copy the files listed below into the \NFS directory of your
hard disk. These files will be used in the installation.
File Description
------------ -----------------------------------------
NFSODI.SYS PC-NFS driver program
DE65SODI.COM ODI driver program
LSL.COM NetWare Link Support Layer
IPXODI.COM NetWare IPX/SPX Protocol
NETX.EXE NetWare Workstation Shell
The following lists the contents of the configuration files:
CONFIG.SYS AUTOEXEC.BAT
ÄÄÄÄÄÄÄÄÄÄ ÄÄÄÄÄÄÄÄÄÄÄÄ
SWITCHES=/F SET TZ=EST5EDT
DEVICE=C:\HIMEM.SYS C:\DOS\SMARTDRV.EXE
DEVICE=C:\EMM386.EXE NOEMS X=D000-D7FF @PROMPT $p$g
DOS=HIGH,UMB PATH=C:\NFS;C:\WINDOWS;
BUFFERS=10,0 SET TEMP=C:\DOS
FILES=40 SET NFSDRIVE=C
STACKS=0,0 SET NFSPATH=C:\NFS
LASTDRIVE=G SET TN_DIR=C:\NFS\TELNET
SHELL=C:\DOS\COMMAND.COM C:\DOS /P LSL
DEVICE=C:\NFS\PCNFS.SYS /l40 DE65SODI
DEVICE=C:\NFS\SOCKDRV.SYS C:\NFS\PRT *
DEVICE=C:\NFS\NFSODI.SYS /b2 C:\NFS\NET INIT
IPXODI
NETX
NET.CFG
ÄÄÄÄÄÄÄ
Link driver DE65SODI
Frame Ethernet_802.3
Frame Ethernet_II
Protocol IPX 0 Ethernet_802.3
If your Novell FILE SERVER is configured to use the
Ethernet_802.3 frame type, add a /b2 switch to the line
DEVICE=C:\NFS\NFSODI.SYS in your CONFIG.SYS file and add
an entry in your NET.CFG file defining the two frames types.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.