1. de650aui.zip Driver
2. MSCLIENT.TXT File Contents

MSCLIENT.TXT Driver File Contents (de650aui.zip)

           D-Link DE-650 Ethernet PC Card Installation
                   for Microsoft Network Client 3.0 for MS-DOS


 Introduction
 ÍÍÍÍÍÍÍÍÍÍÍÍ
    This installation assumes that the PC Card devices ar working
    properly. Please consult INST_DOS.TXT for help with PC Card driver.
    Getting Started will describe the installation instructions.


 Getting Started
 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
    [Method 1]:
         Please Change to the Microsoft Network Client subdirectory,
          and run SETUP.EXE. (default directory is C:\NET)

         Responds to the screen prompts, selecting "Change Network
          Configuration",then press <Enter>.

         Move the highlight to "Add Adapter", press <Enter>.

         Select "Network adapter not shown on list below ...".

        Insert the driver diskette into the drive A or B

         Please specify the location of the OEM driver
            Ex: A:\NDIS\DOS

         Select "Add Protocol" as you want.

         Follow  screen instructions  to complete the process. Simply
          pressing  <Enter>  for each screen display will select the
          default options. Press  <Enter>  until you reach the display
          prompting you to reboot your system.


    [Method 2]:
         Execute SETUP.EXE from Microsoft Network Client for DOS
          release diskette.

         Specify the <target path> which Microsoft Network Client for
          DOS files will been copy.

         Select "Network adapter not shown on list below ...".

        Insert the driver diskette into the drive A or B.

         Please specify the location of the OEM driver
            Ex: A:\NDIS\DOS

         Select "D-Link DE-650 Ethernet PC Card".

         Select "Change Network Configuration", "Add Protocol" as you
          want.

         Follow  screen instructions  to complete the process. Simply
          pressing  <Enter>  for each screen display will select the
          default options. Press  <Enter>  until you reach the display
          prompting you to reboot your system.


    Sample Configuration Files:
    ---------------------------
    PROTOCOL.INI (install will creates this file)

        [network.setup]
        version=0x3110
        netcard=DE65S,1,DE65S,1
        transport=ms$ndishlp,MS$NDISHLP
        transport=ms$netbeui,MS$NETBEUI
        lana0=DE65S,1,ms$netbeui
        lana1=DE65S,1,ms$ndishlp

        [protman]
        DriverName=PROTMAN$
        PRIORITY=MS$NDISHLP

        [MS$NDISHLP]
        DriverName=ndishlp$
        BINDINGS=DE65S

        [MS$NETBEUI]
        DriverName=netbeui$
        SESSIONS=10
        NCBS=12
        BINDINGS=DE65S
        LANABASE=0

        [DE65S]
        DriverName=DE65S$
        IOADDRESS=300
        INTERRUPT=11F