D-Link DE-650 Ethernet PC Card Installation
for IBM Lan Support and Lan Services
Introduction
ÍÍÍÍÍÍÍÍÍÍÍÍ
This installation assumes that the PC Card devices are working
properly. Please consult INST_DOS.TXT for help with PC Card
Drivers. Getting Started will describe the installation for Lan
Support/Servers.
Getting Started
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
Installation for IBM Lan Support (see below for Lan Services 4.x)
Please use Method 1 or 2 for this installation
Method 1 -- Using the .NIF file:
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Insert the LAN Support diskette in Drive A.
Run the install program.
A:\> DXMAID [Enter]
The following message then appears:
"Do you have driver diskettes?" [Yes]
Use the Spacebar to switch between "no" and "yes".
After copying LAN Support, insert the driver diskette into
drive A.
specify the drive and path of the DOS NDIS files.
For example: A:\NDIS\DOS [Enter]
The installation procedure terminates after copying the
necessary file.
Method 2 -- Modifying the contents of the CONFIG.SYS and
PROTOCOL.INI files after installing other NICs:
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Copy the DE65S.DOS file to the directory where your IBM LAN
Support program resides.
Modify the NDIS device driver statement in the CONFIG.SYS
as follows:
DEVICE = [drive]:\path\DE65S.DOS
Modify the PROTOCOL.INI file as follows:
BINDINGS = DE65SIBM_NIF
:
:
[DE65SIBM_NIF]
DRIVERNAME = DE65S$
IBM LAN Services v4.x installation instructions
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Execute the installation program from the IBM DOS LAN SERVICES
diskette
Type: >a:\install
From the Network card field, select "Network card not shown in
list below...".
Insert the driver diskette into the drive A or B.
Specify the path for the corresponding oemsetup.inf file of the
OEM driver intended for use. Then, press Enter. The program then
displays the driver name.
Ex: A:\NDIS\DOS
Check that the driver configuration is correct.
Complete the installation, restart your system to use the DOS LAN
Services.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.