1. de650aui.zip Driver
2. BANYAN.TXT File Contents

BANYAN.TXT Driver File Contents (de650aui.zip)

           D-Link DE-650 Ethernet PC Card Installation
                   for Banyan Vines


 Introduction
 ÍÍÍÍÍÍÍÍÍÍÍÍ
        This installation assumes that the PC Card devices are working
        properly. Please consult INST_DOS.TXT for help with PC Card
        Drivers. Getting Started will describe the installation for
        Banyan.


 Getting Started
 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
    There are two methods of copying files from the Banyan VINES
    workstation to the bootable diskette or subdirectory on the hard
    disk.

    Method 1:
        Execute the 'INSTALL' command included in the diskette labeled
         "VINES MASTER DISK".
        Follow the given instructions for copying files.

    Method 2:
        Execute the 'BAN' command.
        Login to VINES system.
        Execute the 'PCCOPY' command.
        Select the 'NDIS Ethernet' option and follow the instructions
         for copying files.
        Insert the driver diskette in Drive A and the prepared
         bootable diskette in Drive B. Then, copy the appropriate NDIS
         driver file DE65S.DOS from Drive A to Drive B or to the
         subdirectory of the hard disk.
        Create a CONFIG.SYS file with the following statements:

          DEVICE=PROTMAN.DOS /I:A:\
          DEVICE=DE65S.DOS

         NOTE:
         A:\ is the path where Banyan VINES workstation files reside.

       Create a DE65S.NIF file containing the following statements:

         Model = D-Link DE-650 Ethernet PC Card
         Path = A:\
         DeviceDriver = DE65S.DOS
         DeviceName = DE65S$
         Type = NDIS

         NOTE:
         A:\ is the path where Banyan VINES workstation files reside.

      Create a PROTOCOL.INI file with the following lines:

        [PROTOCOL MANAGER]
        drivername = PROTMAN$

        [VINES_XIF]
        drivername = NDISBAN$
        bindings = "DE65S"

        [DE65S]
        drivername = DE65S$

     Execute the 'PCCONFIG' command.

        A "CONFIGURING A PC FOR THE NETWORK" message appears on the
        screen. The program then provides some options you can select.

     Select "1 - Network Card Settings".

        Another screen appears for selecting some options.

     Select "NDIS Ethernet".

     Select the appropriate configuration of the adapter.

     After configuring the adapter, you return to the main screen.
      Select "2 - Login Environment Settings".

     From the next screen, select "NDIS Ethernet".

      The 'PCCONFIG.DB' file will then be created.

     Reboot your computer.

     Login to VINES by executing the 'BAN' command.