D-Link DE-650CT PC Card Installation Hints for OS/2
Contents
ÍÍÍÍÍÍÍÍ
Introduction
Getting Started
Introduction
ÍÍÍÍÍÍÍÍÍÍÍÍ
The ODI DOS driver, NDIS DOS driver, and NDIS OS/2 driver are the only
network operating system drivers that support an On-Line Hot-Swap
function. Hot-swap allows the card to be removed and re-inserted with
out reloading the driver. Eventhough the driver supports Hot-Swap your
NOS may not support hot-swap.
DCD16.OS2:
DCD16.OS2 and DCDOPEN.OS2 are client drivers for IBM OS/2 Warp.
It is based on the OS/2 Card Service PCMCIA.SYS.
PCIC16.OS2:
PCIC16.OS2 is an enabler for OS/2 before version 2.1 that hasn't
to install Card Service. PCIC16.OS2 only support Intel 82365SL
compatible PCMCIA controller.
The PCMCIA.SYS is the card service of OS/2 system which is provided
by the IBM above the OS/2 version 2.1.
For the OS/2 system which does not install card service, the
PCIC16.OS2 must be run before the network driver loaded.
For the usage of PCIC16.OS2 see below for detail.
Getting Started
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
I. For NDIS.OS2 Driver
OS/2 Warp Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Install OS/2 Warp
Example of CONFIG.SYS as follow.
.
.
BASEDEV=PCMCIA.SYS ÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄ Card Services
DEVICE=C:\OS2\MDOS\VPCMCIA.SYS ÄÄÄÄÄÄÄÄÄÄÄÙ
.
.
BASEDEV=IBM2SS01.SYS /s0=2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Socket Services
.
.
DEVICE=C:\IBMCOM\MACS\DE65S.OS2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ DE-650 driver
Shutdown your computer and restart it.
IBM OS/2 below the version 2.1 and MS OS/2 which does not have
the PCMCIA Card Service
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
This PCIC16.OS2 program is used to open an I/O window mapping and
IRQ of PCIC(82365SL) or compatible PCMCIA chipset. The network
drivers will need to match those specified by PCIC16.OS2.
Install PCIC16.OS2:
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
In OS/2 config.sys add:
:
DEVICE=C:\path\PCIC16.OS2 [/iop:P0] [/irq:P1] [/slt:P2]
DEVICE=C:\IBMCOM\MAC\DE65N.OS2 ÄÄÄÄ> D-Link Network Driver
:
Optional Parameter Description:
/iop :I/O base
/irq :IRQ value
/slt :Slot number
P0 :The selectable window I/O base with 0x20 range.
The default value is 0x300.
P1 :The selectable irq value.
The default value is 0x11.
P2 :The selectable slot number.
The default number is 0.
II.For ODI.OS2 Driver
PCIC16.OS2 for OS/2 2.x (See below for IBM Thinkpad and Warp Install)
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
This PCIC16.OS2 program is used to open an I/O window mapping and
IRQ of PCIC(82365SL) or compatible PCMCIA chipset. The network
drivers will need to match those specified by PCIC16.OS2.
Install PCIC16.OS2:
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
In OS/2 config.sys add:
:
DEVICE=C:\path\PCIC16.EXE [/iop:P0] [/irq:P1] [/slt:P2]
DEVICE=C:\NETWARE\DE65SODI.SYS ÄÄÄÄ> D-Link Network Driver
:
Optional Parameter Description:
/iop :I/O base
/irq :IRQ value
/slt :Slot number
P0 :The selectable window I/O base with 0x20 range.
The default value is 0x300.
P1 :The selectable irq value.
The default value is 0x11.
P2 :The selectable slot number.
The default number is 0.
IBM Thinkpads using OS/2 v2.x
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Install IBM PCMCIA software into your system.
Add DCD16.OS2 and DCDOPEN.OS2 to CONFIG.SYS
Sample CONFIG.SYS file: (Thinkpad 750/750C)
:
DEVICE=C:\OS2\APM.SYS
:
DEVICE=C:\OS2\PCMCIA.SYS
DEVICE=C:\OS2\MDOS\VPCMCIA.SYS
:
DEVICE=C:\path\DCD16.OS2 ÄÄÂÄÄ D-Link Client Drivers
DEVICE=C:\path\DCDOPEN.OS2 ÄÄÙ
:
DEVICE=C:\THINKPAD\$ICPMOS2.SYS
DEVICE=C:\THINKPAD\IBM2SS01.SYS /S0=2
DEVICE=C:\THINKPAD\ICRMU01.SYS
:
Shutdown your computer and restart it.
Install network driver.
Warning:
Please note that the parameters of DCD16.OS2 must match the
NDIS for OS/2 or ODI for OS/2 drivers,
Insert DE-650CT card before boot OS/2 system because OS/2
will load the client drivers and network driver when it
brings up the system. A missing card may cause the OS/2
system to fail.
The default driver parameters are I/O=300 and IRQ=11.
OS/2 v3.0 Warp Installation
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Install OS/2 v3.0 Warp
Edit CONFIG.SYS as follow.
IFS=C:\OS2\HPFS.IFS /CACHE:512 /CRECL:4 /AUTOCHECK:C
PROTSHELL=C:\OS2\PMSHELL.EXE
SET USER_INI=C:\OS2\OS2.INI
SET SYSTEM_INI=C:\OS2\OS2SYS.INI
SET OS2_SHELL=C:\OS2\CMD.EXE
SET AUTOSTART=PROGRAMS,TASKLIST,FOLDERS,CONNECTIONS,LAUNCHPAD
SET RUNWORKPLACE=C:\OS2\PMSHELL.EXE
SET COMSPEC=C:\OS2\CMD.EXE
LIBPATH=.;C:\OS2\DLL;C:\OS2\MDOS;C:\;C:\OS2\APPS\DLL;C:\MMOS2\DLL;
C:\NETWARE;
SET PATH=C:\OS2;C:\OS2\SYSTEM;C:\OS2\INSTALL;C:\;C:\OS2\MDOS;
C:\MMOS2;C:\NETWARE;L:\OS2;P:\OS2;L:\NLS;P:\NLS;
SET DPATH=C:\OS2;C:\OS2\SYSTEM;C:\OS2\INSTALL;C:\;C:\OS2\BITMAP;
C:\OS2\MDOS;C:\OS2\APPS;C:\MMOS2;C:\MMOS2\INSTALL;
C:\NETWARE;L:\OS2; P:\OS2;L:\NLS;P:\NLS;
SET PROMPT=$i[$p]
SET HELP=C:\OS2\HELP;C:\OS2\HELP\TUTORIAL;C:\MMOS2\HELP;
SET GLOSSARY=C:\OS2\HELP\GLOSS;
SET IPF_KEYS=SBCS
PRIORITY_DISK_IO=YES
FILES=20
BASEDEV=IBMKBD.SYS
DEVICE=C:\OS2\BOOT\TESTCFG.SYS
DEVICE=C:\OS2\BOOT\DOS.SYS
DEVICE=C:\OS2\BOOT\PMDD.SYS
BUFFERS=90
IOPL=YES
DISKCACHE=D,LW
MAXWAIT=3
MEMMAN=SWAP,PROTECT
SWAPPATH=C:\OS2\SYSTEM 2048 4096
BREAK=OFF
THREADS=256
PRINTMONBUFSIZE=134,134,134
COUNTRY=001,C:\OS2\SYSTEM\COUNTRY.SYS
SET KEYS=ON
SET BOOKSHELF=C:\OS2\BOOK;C:\MMOS2;
SET SOMIR=C:\OS2\ETC\SOM.IR;C:\OS2\ETC\WPSH.IR;C:\OS2\ETC\WPDSERV.IR
SET SOMDDIR=C:\OS2\ETC\DSOM
REM SET DELDIR=C:\DELETE,512;
BASEDEV=PRINT01.SYS
BASEDEV=IBM1FLPY.ADD
BASEDEV=IBM2FLPY.ADD
BASEDEV=IBM1S506.ADD
BASEDEV=XDFLOPPY.FLT
BASEDEV=OS2DASD.DMD
SET EPMPATH=C:\OS2\APPS;
PROTECTONLY=NO
SHELL=C:\OS2\MDOS\COMMAND.COM C:\OS2\MDOS
FCBS=16,8
RMSIZE=640
DEVICE=C:\OS2\MDOS\VEMM.SYS
DOS=LOW,NOUMB
DEVICE=C:\OS2\MDOS\VXMS.SYS /UMB
DEVICE=C:\OS2\MDOS\VDPMI.SYS
DEVICE=C:\OS2\MDOS\VDPX.SYS
DEVICE=C:\OS2\BOOT\APM.SYS
DEVICE=C:\OS2\MDOS\VAPM.SYS
DEVICE=C:\OS2\MDOS\VMOUSE.SYS
DEVICE=C:\OS2\BOOT\POINTDD.SYS
DEVICE=C:\OS2\BOOT\MOUSE.SYS
CODEPAGE=437,850
DEVINFO=KBD,US,C:\OS2\KEYBOARD.DCP
BASEDEV=PCMCIA.SYS ÄÄÄÄÄÄÄÄÄÄÄÂÄÄÄÄ Card Services
DEVICE=C:\OS2\MDOS\VPCMCIA.SYS ÄÄÄÄÄÄÄÄÄÄÄÙ
DEVICE=C:\OS2\BOOT\COM.SYS
DEVICE=C:\OS2\MDOS\VCOM.SYS
DEVICE=C:\OS2\BOOT\AUTODRV2.SYS C:\OS2\AUTODRV2.INI
******************************************************
ADD
DEVICE=C:\path\DCD16.OS2 /IOP:320 /IRQ:11 ÄÄÂÄÄ Client Drivers
DEVICE=C:\path\DCDOPEN.OS2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ here
******************************************************
BASEDEV=IBM2SS01.SYS /s0=2 ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Socket Services
DEVINFO=SCR,VGA,C:\OS2\BOOT\VIOTBL.DCP
SET VIDEO_DEVICES=VIO_SVGA
SET VIO_SVGA=DEVICE(BVHVGA,BVHSVGA)
DEVICE=C:\OS2\MDOS\VSVGA.SYS
DEVICE=C:\MMOS2\CS4231.SYS N:BSAUD1$
DEVICE=C:\MMOS2\VCS4231.SYS BSAUD1$
SET MMBASE=C:\MMOS2;
SET DSPPATH=C:\MMOS2\DSP;
SET NCDEBUG=4000
DEVICE=C:\MMOS2\SSMDD.SYS
DEVICE=C:\MMOS2\R0STUB.SYS
REM --- NetWare Requester statements BEGIN ---
SET NWLANGUAGE=ENGLISH
DEVICE=C:\NETWARE\LSL.SYS
RUN=C:\NETWARE\DDAEMON.EXE
REM -- ODI-Driver Files BEGIN --
DEVICE=C:\NETWARE\DE65SODI.SYS ÄÄÄÄÄÄÄÄÄÄÄ> ODI Driver
rem DEVICE=C:\NETWARE\NE2000.SYS
REM DEVICE=C:\NETWARE\ROUTE.SYS
REM -- ODI-Driver Files END --
DEVICE=C:\NETWARE\IPX.SYS
DEVICE=C:\NETWARE\SPX.SYS
RUN=C:\NETWARE\SPDAEMON.EXE
DEVICE=C:\NETWARE\NMPIPE.SYS
rem DEVICE=C:\NETWARE\NPSERVER.SYS
RUN=C:\NETWARE\NPDAEMON.EXE
DEVICE=C:\NETWARE\NWREQ.SYS
IFS=C:\NETWARE\NWIFS.IFS
RUN=C:\NETWARE\NWDAEMON.EXE
DEVICE=C:\NETWARE\NETBIOS.SYS
RUN=C:\NETWARE\NBDAEMON.EXE
DEVICE=C:\NETWARE\VIPX.SYS
DEVICE=C:\NETWARE\VSHELL.SYS PRIVATE
REM --- NetWare Requester statements END ---
Shutdown your computer and restart it.
Install network driver.
Please be careful that:
Please note that the parameters of DCD16.OS2 must match the
NDIS for OS/2 or ODI for OS/2 drivers,
Insert DE-650CT card before boot OS/2 system because OS/2
will load the client drivers and network driver when it
brings up the system. A missing card may cause the OS/2
system to fail.
The default driver parameters are I/O=300 and IRQ=11.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.