1. 970717.zip Driver
2. NCSA.TXT File Contents

NCSA.TXT Driver File Contents (970717.zip)

           D-Link DE-650 Ethernet PC Card Installation
                   for NCSA


 Introduction
 ÍÍÍÍÍÍÍÍÍÍÍÍ
    This installation assumes that the PC Card devices are working
    properly. Please consult README.TXT for help with setup of the PC
    Card. Getting Started will describe the installation instructions.


 Getting Started
 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
    The First Step :

    Loading driver via two methods :

    METHOD 1:
    ÄÄÄÄÄÄÄÄ
     If the DE65SPD.SYS program is used, the following statement must
      be included in your CONFIG.SYS file:

       DEVICE = DE65SPD.SYS [/option] <packet_int_no>

      See README.TXT for addition parameters

      You can place this line anywhere in the CONFIG.SYS file.

    METHOD 2:
    ÄÄÄÄÄÄÄÄÄ
     If the DE65SPD.COM program is used, follow these steps:

     Execute DE65SPD.COM by typing:

          >DE65SPD [/option] <packet_int_no>

      See README.TXT for addition parameters

    The Secondry Step:

     First, you need to install NCSA TCP/IP distributions into your
      machines.

      See also NCSA TCP/IP distributions \INSTALL for detail informations

     Please set correct values in CONFIG.TEL which is included in NCSA
      TCP/IP distributions as followings:

      in CONFIG.TEL
            :
            :
         hardware    = packet
         ioaddr      = <iobase>
         interrupt   = <irq>
            :
            :

      These values must the same as driver's parameters.

     NCSA TCP/IP associated programs are ready to used

      See also NCSA TCP/IP distributions \INSTALL for detail informations

    Examples:

      > DE65SPD.COM 0x62

      > EDIT CONFIG.TEL
            :
        hardware     = packet
        ioaddr       = <iobase>
        interrupt    = <irq>
            :

      > TELNET <IP_ADDRESS>



How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.