1. 970717.zip Driver
2. DLKTCP.TXT File Contents

DLKTCP.TXT Driver File Contents (970717.zip)

        D-Link DE-650 Ethernet PC Card Installation
                   for D-Link's TCP/IP


 Introduction
 ÍÍÍÍÍÍÍÍÍÍÍÍ
        This installation assumes that the PC Card devices are working
        properly. Please consult INST_DOS.TXT for help with PC Card
        Driver. Getting Started will describe the installation
        instructions.


 Getting Started
 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
        There are two methods of running the D-Link's TCP/IP program.

        METHOD 1:
       ÄÄÄÄÄÄÄÄÄ
        If the DE65SPD.SYS program is used, the following statement must
         be included in your CONFIG.SYS file:

         DEVICE = DE65SPD.SYS [/d] [/w] <packet_int_no>

         <packet_int_no> is the software interrupt vector number used by
                         the packet driver program.  This can be from 96
                         to 128.
         /d              Delay Initial - The driver program will not
                         initialize the network interface card until the
                         packet driver program is accessed by its upper
                         layer program.

         /w              The -w parameter is for use only in the Windows
                         environment.

         See INST_DOS.TXT for addition parameters

            You can place this line anywhere in the CONFIG.SYS file.

        METHOD 2:
        ÄÄÄÄÄÄÄÄÄ
        If the DE65SPD.COM program is used, follow these steps:

        Modify your AUTOEXEC.BAT file to include the following line:

         set HOSTS=<PATH>

        <PATH> here is the directory where the D-Link TCP/IP
        programs reside.

        Execute DE65SPD.COM by typing the following:

        >DE65SPD [/option] <packet_int_no>

        Execute TCPSTART.EXE to start TCP/IP.


How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.