D-Link DE-650 Ethernet PC Card Installation
for NetWare Server 3.12 Driver
Contents
ÍÍÍÍÍÍÍÍ
Introduction
Getting Started
Introduction
ÍÍÍÍÍÍÍÍÍÍÍÍ
This installation assumes that the PC Card drivers are working
properly. Please consult INST_DOS.TXT for help with PC Card
Drivers. Getting Started will describe the installation
instructions.
Getting Started
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
******************************************************************
* Notes: The PC Card should be enabled by Card service. *
* Please run DCD16.EXE before start server. *
* *
* Content of CONFIG.SYS *
* --------------------- *
* Add below item in CONFIG.SYS *
* *
* DEVICE=<PATH>\DCD16.EXE /iop=300 /irq=11 *
* ; <PATH> is a directory include DCD16.EXE file. *
* ; Please reference INST_DOS.TXT for detail. *
******************************************************************
Modifying an existing NetWare 3.12 Server
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Make a sub-directory NLMS.OLD under <SRVPATH> directory which
include SERVER.EXE.
Ex. <SRVPATH> = SRV312.
>MD \SRV312\NLMs.OLD
Save MSM31X.NLM and ETHERTSM.NLM to NLMS.OLD
sub-directory.
Please insert release driver diskette into floppy disk.
Copy all provided NLM and LAN files into your dos directory
which include SERVER.EXE.
>COPY <PATH>\*.* C:\<SRVPATH>
Ex. >COPY A:\SERVER\NWDE65S.LAN C:\SRV312
>COPY A:\SERVER\MSM31X.NLM C:\SRV312
>COPY A:\SERVER\ETHERTSM.NLM C:\SRV312
<PATH> here is the directory where support NLMs and
NWDE65S.LAN reside.
Start the NetWare Server.
> CD \SRV312
> SERVER
From the Novell Server side, execute "LOAD INSTALL". Type:
:LOAD INSTALL
Select <System Option>
Select <Edit Autoexec.NCF file>
Add below item into the server's AUTOEXEC.NCF file.
LOAD C:\SRV312\MSM31X.NLM
LOAD C:\SRV312\ETHERTSM.NLM
LOAD C:\SRV312\NWDE65S PORT=300 INT=B FRAME=Ethernet_802.3
NAME=NWDE65S_1_E83
BIND IPX NWDE65S_1_E83 NET=xxxx
LOAD C:\SRV312\NWDE65S PORT=300 INT=B FRAME=Ethernet_802.2
NAME=NWDE65S_1_E82
BIND IPX NWDE65S_1_E82 NET=xxxx
LOAD C:\SRV312\NWDE65S PORT=300 INT=B FRAME=Ethernet_II
NAME=NWDE65S_1_EII
BIND IPX NWDE65S_1_EII NET=xxxx
LOAD C:\SRV312\NWDE65S PORT=300 INT=B FRAME=Ethernet_SNAP
NAME=NWDE65S_1_ESP
BIND IPX NWDE65S_1_ESP NET=xxxx
Restart the server again.
******************************************************************
* Notes: The PC Card should be enabled by Card service. *
* Please run DCD16.EXE before start server. *
* *
* > DCD16 /iop=300 /irq=11 *
******************************************************************
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.