D-Link DE-650 Ethernet PC Card Installation
for IBM Warp Server, Lan Server and Comm. Manager 1.x
Introduction
ÍÍÍÍÍÍÍÍÍÍÍÍ
This installation assumes that the PC Card devices are working
properly. Please consult INST_OS2.TXT for help with PC Card
Drivers. Getting Started will describe the installation for Lan
Server.
Getting Started
ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
The following is how to install Lan Server and Comm. Manager. Due
to Lan Server 4.x popularity it's documentation appears first.
Installing the NDIS driver for IBM Warp Server/Warp Connect
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
In the OS/2 Desktop group, double-click on the "LAN Services
and Protocol Services" icon.
Double-Click the "Adapters and Protocol Services" icon to enter
the MPTS configuration process.
Click on the <OK> Button.
Click on the <Configure> button.
Select the "LAN adapters and protocols" option.
Click on the <Configure> button.
Select the "Other adapters ..." option.
Insert the driver diskette into Drive A or B and type the
driver path:
A:\<PATH> Where PATH is the driver directory.
Ex: \NDIS\OS2.V3
Click on the <OK> button.
Select "D-Link DE-650 Ethernet PC Card", and then click
on the <Add> button.
Select "IBM OS/2 NETBIOS", and then click on the <Add> button.
Select "IBM IEEE 802.2", and then click on the <Add> button.
Click OK.
Click Close.
Click Exit.
Click Exit.
Reboot your system.
Installing the NDIS driver for IBM LAN SERVER 4.0
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
In the OS/2 Desktop group, double-click on the LAN Server MPTS
icon.
Click on the <Configure> button.
Select the "LAN adapters and protocols" option.
Click on the <Configure> button.
Select the "Other adapters ..." option.
Insert the driver diskette in Drive A or B and type the
driver path:
A:\<PATH> Where PATH is the driver directory.
Ex: \NDIS\OS2.V3
Click on the <OK> button.
Select "D-Link DE-650 Ethernet PC Card", and then click
on the <Add> button.
Select "IBM OS/2 NETBIOS", and then click on the <Add> button.
Select "IBM IEEE 802.2", and then click on the <Add> button.
Click OK.
Click Close.
Click Exit.
Reboot your system.
Installing the NDIS driver for IBM LAN SERVER 3.0
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Install IBM OS/2 into your system, if not yet installed.
Insert the NTS/2 Adapter & Protocol Support Disk in Drive A.
Execute the LAPs program.
Select "Install", and then specify the target drive.
Select "Install" again and insert the driver diskette 2 in
Drive A.
Select "Configure".
Select "D-Link DE-650 Ethernet PC Card", and then click on the
Add button.
Select "IBM OS/2 NETBIOS", and then click on the Add button.
Select "IEEE 802.2", and then click on the Add button.
Click OK.
Click Exit.
Click Continue.
Reboot your system.
Your CONFIG.SYS and PROTOCOL.INI files should reflect your
card setup:
\CONFIG.SYS
===========
(I) For OS/2 V3.0
:
Device=d:\IBMCOM\MACS\DE65S.OS2
:
(II) For OS/2 V2.x
:
Device=d:<path>\PCIC16.OS2
Device=d:\IBMCOM\MACS\DE65N.OS2
:
\IBMCOM\PROTOCOL.INI
====================
(I) For OS/2 V3.0
:
[DE65SIBM_NIF]
Drivername = DE65S$
(II) For OS/2 V2.x
:
[DE65NIBM_NIF]
Drivername = DE65N$
Install the LAN Server or Requester program. For information,
please refer to your IBM LAN Server "Planning and Installation"
manual.
Installing the NDIS driver for IBM LAN SERVER 2.0
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Assuming that OS/2 2.1 is correctly installed and working
properly, install the LAN SERVER. At this point, no network
adapters must be installed in the computer.
Install LAN SERVER according to the IBM installation procedure.
When prompted for the adapter, select any of the adapters LAN
SERVER supports. For example, "Western Digital EtherCard ..."
Then, continue with the LAN SERVER installation.
After successfully installing LAN SERVER, shut down OS/2 for
system configuration. Do not install any network adapters yet.
The OS/2 system will boot up and bring up the LAN SERVER
services. The system will then display error messages since the
network adapter you selected is not installed. Ignore these
messages and continue with the OS/2 booting procedure.
Insert the driver diskette in Drive A and copy the
following files:
COPY DE65S.OS2 (DE65N.OS2) to C:\IBMCOM\MACS
COPY DE65SIBM.NIF (DE65NIBM.NIF) to
C:\IBMCOM\MACS\DE65SIBM.NIF (DE65NIBM.NIF)
In the OS/2 Desktop group, run the OS/2 system editor. You need
to modify the following files:
C:\CONFIG.SYS
C:\IBMCOM\PROTOCOL.INI
CONFIG.SYS Modifications:
DEVICE=C:\IBMCOM\MACS\MACWD.OS2
to
DEVICE=C:\IBMCOM\MACS\DE65S.OS2 (FOR OS/2 V3.0)
or
DEVICE=C:<path>\PCIC16.OS2
DEVICE=C:\IBMCOM\MACS\DE65N.OS2 (FOR OS/2 V2.X)
PROTOCOL.INI Modifications:
- Under the [IBMLXCFG] section, add the following line:
DE65SIBM_nif = DE65SIBM.nif (or DE65NIBM_nif = DE65NIBM.nif)
- Under the [NETBEUI_nif] section, change the following line:
Bindings = MACWDMC_nif
to
Bindings = DE65SIBM_nif (or DE65NIBM_nif)
- Under the MAC SECTION definitions, add the following section:
(I) For OS/2 V3.0
[DE65SIBM_nif]
DriverName = DE65S$
(II) For OS/2 V2.x
[DE65NIBM_nif]
DriverName = DE65N$
After modifying the two files above, shut down OS/2, and turn
the computer off.
Install the DE-650.
Turn on the system to start OS/2.
After starting OS/2, LAN SERVER services can now successfully
start without causing any errors.
Installing the NDIS driver for IBM Communication Manager
ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ
Install IBM Communication Manager
Copy the DE65S.OS2 (DE65N.OS2) and DE65SIBM.NIF (DE65NIBM.NIF)
in the driver diskette to the C:\IBMCOM\MACS directory
Select the DE-650 adapter
Choose the appropriate protocols
Check that the CONFIG.SYS file includes the following line:
DEVICE = C:\IBMCOM\MACS\DE65S.OS2 (FOR OS/2 V3.0)
or
DEVICE = C:<path>\PCIC16.OS2
DEVICE = C:\IBMCOM\MACS\DE65N.OS2 (FOR OS/2 V2.x)
Shut down your OS/2 system, and then reboot your PC
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.