1. 970717.zip Driver
2. IBMLAN.TXT File Contents

IBMLAN.TXT Driver File Contents (970717.zip)

           D-Link DE-650 Ethernet PC Card Installation
                   for IBM Lan Support and Lan Services


 Introduction
 ÍÍÍÍÍÍÍÍÍÍÍÍ
        This installation assumes that the PC Card devices are working
        properly. Please consult INST_DOS.TXT for help with PC Card
        Drivers. Getting Started will describe the installation for Lan
        Support/Servers.


 Getting Started
 ÍÍÍÍÍÍÍÍÍÍÍÍÍÍÍ
    Installation for IBM Lan Support (see below for Lan Services 4.x)
    Please use Method 1 or 2 for this installation

    Method 1 -- Using the .NIF file:
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

        Insert the LAN Support diskette in Drive A.
        Run the install program.

                 A:\> DXMAID [Enter]

        The following message then appears:

                 "Do you have driver diskettes?"  [Yes]

        Use the Spacebar to switch between "no" and "yes".

        After copying LAN Support, insert the driver diskette into
         drive A.

        specify the drive and path of the DOS NDIS files.

         For example: A:\NDIS\DOS [Enter]

        The installation procedure terminates after copying the
         necessary file.


    Method 2 -- Modifying the contents of the CONFIG.SYS and
    PROTOCOL.INI files after installing other NICs:
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

        Copy the DE65S.DOS file to the directory where your IBM LAN
         Support program resides.

        Modify the NDIS device driver statement in the CONFIG.SYS
         as follows:

          DEVICE = [drive]:\path\DE65S.DOS

        Modify the PROTOCOL.INI file as follows:

           BINDINGS = DE65SIBM_NIF
                     :
                     :
          [DE65SIBM_NIF]
          DRIVERNAME = DE65S$


    IBM LAN Services v4.x installation instructions
    ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ

        Execute the installation program from the IBM DOS LAN SERVICES
         diskette

                Type: >a:\install

        From the Network card field, select "Network card not shown in
         list below...".

        Insert the driver diskette into the drive A or B.

        Specify the path for the corresponding oemsetup.inf file of the
         OEM driver intended for use.  Then, press Enter. The program then
         displays the driver name.

         Ex:    A:\NDIS\DOS

        Check that the driver configuration is correct.

        Complete the installation, restart your system to use the DOS LAN
         Services.



How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.