E1.INI Driver File Contents (p36_ennt.exe)

[Setting]
IOBUSType   = 0		// 0:Parallel 1:USB
CalibrateOn = 1
StartPos    = -1
SpeedMode   = -1
LeftLeading = -1
WarmupTime  = 45

[Files]
FileName_LUT1=lut1.tab
FileName_LUT2=lut.plg

[Calibrate]
CalibrateType = 1
DoLineDark    = 1
DoPixelDark   = 0
DoLineGain    = 1
DoPixelGain   = 1
DumpDarkGain  = 0

[G2E_600]
ExposureTime_Max = -1		// default 13800
ExposureTime_Min = -1		// default 2200
MotorSpeed	 = -1		// from 0 to 7, default 7
SkipSteps	 = 100
MotorChange	 = -1		// Motor switch circuit , default 3000
HalforFull	 = -1		// delault 0 , 0:FULL 1:Half Step
ApplyLUT	 = 1		// 1: use external lookup table
BW_Threshold	 = 160		//delault 110
Calib_OneTime	 = 0		//default 0

[G2E_600_BT]
ExposureTime_Max = -1		// default 11400
ExposureTime_Min = -1		// default 1900
MotorSpeed	 = -1		// from 0 to 7, default 7
SkipSteps	 = 100
MotorChange	 = -1		// Motor switch circuit , default 3000
HalforFull	 = -1		// delault 0 , 0:FULL 1:Half Step
ApplyLUT	 = 1		// 1: use external lookup table
BW_Threshold	 = 160		//delault 110
Calib_OneTime	 = 1		//default 0

[G2E_300]
ExposureTime_Max = -1		// default 5610
ExposureTime_Min = -1		// default 2000
MotorSpeed	 = -1		// from 0 to 7, default 2
SkipSteps	 = 56
MotorChange	 = -1		// Motor switch circuit , default 3000
HalforFull	 = 1		// delault 0 , 0:FULL 1:Half Step
ApplyLUT	 = 1		// 1: use external lookup table
BW_Threshold	 = 180		//delault 110
Calib_OneTime	 = 0		//default 0

[G2E_300_OVER]
ExposureTime_Max = -1		// default 5610
ExposureTime_Min = -1		// default 2000
MotorSpeed	 = -1		// from 0 to 7, default 2
SkipSteps	 = 45
MotorChange	 = -1		// Motor switch circuit , default 3000
HalforFull	 = 1		// delault 0 , 0:FULL 1:Half Step
ApplyLUT	 = 1		// 1: use external lookup table
Gray200 	 = 1850
BW_Threshold	 = 180		//delault 110
Calib_OneTime	 = 1		//default 0

[G3_600]
ExposureTime_Max = -1		// default 12000
ExposureTime_Min = -1		// default 2300
MotorSpeed	 = -1		// from 0 to 7, default 7
SkipSteps	 = -1
MotorChange	 = -1		// Motor switch circuit , default 5000
HalforFull	 = 1		// delault 0 , 0:FULL 1:Half Step
ApplyLUT	 = 1		// 1: use external lookup table
BW_Threshold	 = 160		//delault 110
Calib_OneTime	 = 0		//default 0

[G3_300]
ExposureTime_Max = -1		// default 5610
ExposureTime_Min = -1		// default 2500
MotorSpeed	 = -1		// from 0 to 7, default 7
SkipSteps	 = -1
MotorChange	 = -1		// Motor switch circuit , default 5000
HalforFull	 = 1		// delault 0 , 0:FULL 1:Half Step
ApplyLUT	 = 1		// 1: use external lookup table
BW_Threshold	 = 180		//delault 110
Calib_OneTime	 = 0		//default 0

[Runtime]
Pga_TargetCode_Red   = -1
Pga_TargetCode_Green = -1
Pga_TargetCode_Blue  = -1
TargetDark_Red   = 2
TargetDark_Green = 2
TargetDark_Blue  = 2

Dark_Red   = -1		// init Dark Value
Dark_Green = -1
Dark_Blue  = -1

StartPixel = -1
EndPixel   = -1
BackStep   = -1
WaitCycle  = -1

Max_Times = -1
USB_DELAYTIME = 2
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: web4, load: 0.99