The firmware E200/U of SD-612F(WindowXP)
** Caution: This firmware applies to only SD-612F or SD-612F/DOM.
You can check it on upper surface of the drive after you disassemble the drive from the PC.
-E200U -> UDMA
-E200 -> DMA
============================================
How to upgrade in Dos mode
(In case of windows2000/ME, make the booting diskette)
1. Download the zip file to your computer.
2. Unzip the zip file and reboot in dos mode.
( While OS passes from BIOS to Hard DISC, please keep pressing F8,
and you can find the START UP MENU -> Dos prompt mode/ command com promptly only.)
3.Go to directory contains the firmware.
4. Check if the DVD-ROM is maser or slave.
Master- type sfdndosm E200.bin sm Enter
Slave- type sfdndosm E200U.bin ss Enter
5.When the FIRMWARE DOWNLOAD is completed, power the PC off.
Boot up the PC again.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.