***** BIOS XANA FOXTROT rev. 102 release note *****
BIOS 1.02 is different from preview version due the hardware implementation
of external RTC to solve the problem of internal VIA 586 chip set CMOS part.
This BIOS automatically detect the presence of external or internal RTC and
enable or disable this function.
To do this BIOS 1.02 has some BOOT BLOCK modification due the pin assignament
of VIA 586 chip.
In order to modify the BOOT BLOCK code one utility is made from TRIGEM but un_
furtunatly this utility works fine only in case of NO INTEL FLASH EPROM.
In case of prototype system we should have some motherboards with INTEL FLASH
EPROM so this utility don't have to be used.
In case of rev. B motherboards (samples received from TRIGEM on march 24/97
with ext. RTC) BIOS 1.02 is already implemented and BOOT BLOCK code is modi_
fied.
In case of BA2325 ( first 200 motherboards that we received from TRIGEM) no
INTEL FLASH EPROM are mounted so we can use the BBLOCK batch file that run
the UPDATE utility to modify the BOOT BLOCK code in order to have the right
pin assignment.
In case of prototype we can procedee without BOOT BLOCK modification and in
this way we have the following limitations:
1)we can not change the speaker volume by setup
2)in case of power on/off power supply after shutdown from WIN 95 system does
not powered off also if APM is enabled.
No BOOT BLOCK update are necessary in the future to upgrade BIOS 1.02 to next
revision.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.