1. pro120b.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (pro120b.exe)

           PCI Fast Ethernet Adapters NDIS 3.0 Driver
       For Windows for Workgroups v3.11 Installation Guide
====================================================================

Installation Procedure: 
-----------------------

 1. From the Program Manager, click the "Network" icon.

 2. In the Network window, double-click "Network Setup."

 3. In the Network Setup window, click "Drivers."

 4. In the Network Drivers window, click the "Add Adapter..." button.

 5. When the "Add Network Adpater" window shows up, click the
    "Unlisted or Updated Network Adapter" item for the new driver. Then,
    click the OK button.

 6. Insert the driver diskette into a floppy disk drive A:.

 7. Enter the driver path, "A:\WFW311" or "B:\WFW311", and then click OK. The
    Unlisted or Updated Network Adapter windows will show the name of the
    adpater, and then highlight it. Click OK button.

 8. Close and exit all of the windows. The system will automatically modify
    the CONFIG.SYS, AUTOEXEC.BAT, PROTOCOL.INI, and SYSTEM.INI files.

Setup driver parameters on WFW311:
----------------------------------

    Only one parameter can be set in driver installation & reconfiguration.

    - Media Speed: default is Auto Detection.

      Auto Detection: start NWAY function to perform media speed detection
                      during driver initialization.

      TX 10Mbps     : media speed is set to 10 Mega bits per second.

      TX 10Mbps Full-Duplex :media speed is set to 10Mbps full duplex mode.

      TX 100Mbps    : media speed is set to 100 Mega bits per second.

      TX 100Mbps Full-Duplex :media speed is set to 100Mbps full duplex mode.

Sample Configuration Files
--------------------------

    1. CONFIG.SYS File
       FILES=30
       BUFFERS=30
       LASTDRIVE=Z
       DEVICE=C:\WFW311\HIMEM.SYS
       DEVICE=C:\WFW311\IFSHLP.SYS
       STACKS=9,256

    2. AUTOEXEC.BAT File

       C:\WFW311\SMARTDRV.EXE
       C:\WFW311\net start
       PATH C:\WFW311;
       SET TEMP=C:\WFW311\TEMP

    3. SYSTEM.INI

       [386Enh]
       netcard=mxnicf.386



Brand and product names are trademarks of their respective companies.

==End Of File==