1. pro120b.exe Driver
2. README.TXT File Contents

README.TXT Driver File Contents (pro120b.exe)

                        PCI Fast Ethernet Adapter
                NetWare DOS ODI Workstation Driver 
        for Netware (v3.xx & v4.xx) Installation Guide
=======================================================================     

Installation Procedure:
-----------------------
Before you start with the installation process, make sure that
the adapter is properly installed and configured. Besides, make sure
that your NetWare operating system is properly installed.

1. Execute the following commands in order.

   LSL
   MX32MLID
   IPXODI
   NETX (or VLM)

2. You can now login to the server.

Installation notes: 
-------------------
1. Remember to specify LASTDRIVE=E in the CONFIG.SYS file if using the NETX
   as DOS requester. (specify LASTDRIVE=Z if using the VLM)

2. Since different versions of Netware servers use different default frame type,
   please make sure that both server & workstation are using the same frame. 
   
3. A typical NET.CFG is given below.

        Link SUPPORT
        buffers 8 1514
        mempool 4096

        link driver MX32MLID
        frame Ethernet_802.2  
        frame Ethernet_802.3            
        frame Ethernet_II
        frame Ethernet_snap

4. If you want the driver to be run in a specific mode (Half/Full
   Deplux Mode), what you need to do is to remove the semi-colon in
   front of the corresponing mode (10HD,10FD,100HD or 100FD) in the
   NET.CFG file.

   A typical NET.CFG example to run driver on 100Mbps full deplux mode is
   given below.

        Link SUPPORT
        buffers 8 1514
        mempool 4096

        link driver MX32MLID
        frame Ethernet_802.2  
        frame Ethernet_802.3            
        frame Ethernet_II
        frame Ethernet_snap
        100FD   
         
   The default mode is AUTO. And actual transfer mode will be displayed while
   loading the driver to indicate either FD(Full-Duplex) or HD(Half Duplex).
   

Brand and product names are trademarks of their respective companies.

==End Of File==

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.