1. pro120b.exe Driver
2. LANMAN.TXT File Contents

LANMAN.TXT Driver File Contents (pro120b.exe)

		PCI Fast Ethernet Adapter
        Driver for LAN Manager 2.1 Workstation/Server
		  Installation Guide
=======================================================================

Installation Procedure:
-----------------------

   (1) Introduction:
       ============================================
     This document describes the procedure to setup LAN Manager 2.1
     Workstation/Server driver for the PCI Fast Ethernet Adapter.


   (2) Location of Driver:
       ============================================
      (DOS) \NDIS2\DOS\MXNICF.DOS
      (OS/2)\NDIS2\OS2\MXNICF.OS2


   (3) Sample Configuration Files:
       ============================================
      %%% CONFIG.SYS (for DOS will contain) %%%
          DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /I:C:\LANMAN.DOS
          DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\MXNICF\MXNICF.DOS


      %%% CONFIG.SYS (for OS/2 will contain) %%%
          DEVICE=C:\LANMAN.OS2\DRIVERS\PROTMAN\PROTMAN.OS2 /I:C:\LANMAN.OS2
          DEVICE=C:\LANMAN.OS2\DRIVERS\ETHERNET\MXNICF\MXNICF.OS2


      %%% PROTOCOL.INI (will contain) %%%
         [MXNICF_NIF]
         ; PROTOCOL.INI SAMPLE

           DriverName = MXNICF$

           ;; Range: 0-7.
           ;; Usage: "Board=nn"
           ;------------------
           ; Board = 0

           ;; Options: NWAY, TX10, TX10FD, TX100, TX100FD.
           ;; Usage: "MEDIA_TYPE=xxx"
           ;-------------------------
           MEDIA_TYPE = NWAY

Remark: If you request 10Mbps Full Duplex mode, please change the 
           statement ;;MEDIA_TYPE=NWAY which inside PROTOCOL.INI as 
           ;;MEDIA_TYPE=TX10FD and delete its semi-colon. Please change 
	   corresponding option for another mode.

   (4) NDIS Driver Installation on LAN Manager v2.1
       ============================================
      Before you start with the installation process, make sure that the
      adapter is properly installed and configured. Besides, make sure your
      Microsoft LAN Manager is properly installed too.

      1. Run the appropriate Microsoft LAN Manager SETUP for computer you
         are setting up.(DOS, OS/2 or OS/2 Server). Select "Configuration"
         item since the adapter driver isn't included on the LAN Manager
         disk, insert the adapter driver diskette, select the item
         "PCI Fast Ethernet Adapters NDIS2 MAC Driver" and follow the
         directions.

      2. When completed, reboot your computer.

   (5) NDIS Driver Installation on LAN Manager v2.2
       ============================================

      1. Type setup in the LAN Manager directory and press <Enter>.
         The Microsoft LAN Manager Setup screen should appear.

      2. Choose "Network Drivers" from the "Configuration" field.
         Press <Enter> to confirm your choice.

      3. Choose <Add New Config> and press <Enter> to display a list
         of Network Adapter Drivers.

      4. Choose <Other Driver> and press <Enter>.

      5. Insert the Driver Diskette into drive A: or B: of your PC.
         Indicate the drive location A: or B: of the diskette and select 
	 <OK> to proceed.

      6. Select the appropriate Network Adapter Driver from the list.
         For example, select

          "PRO120(B) PCI Fast Ethernet Adapter"

          Select <OK> to confirm your choice.

      7. Select an appropriate protocol. Use the <Space bar> to mark your
         choice. If you have chosen the TCP/IP protocol, you will be prompted to
         issue the IP address, the subnet mask, and the default gateway (router).
         By the default, the workstation number of NetBIOS session is set to 6.
         Please consult Microsoft LAN Manager Installation Manual for more detail
         or check the online help.

      8. Select <OK> to confirm your choice.  A Configuration Complete messages
         should appear on the screen.

      9. Save the configuration. Select <Save>.

     10. Press <F3> to exit.

Brand and product names are trademarks of their respective companies.

==End Of File==