NSC DP83815 10/100Mbps MacPhyter3v PCI Adapter Installtion
for Windows 95 OSR2
1.0 Installation Notes For Win95 OSR2 Users
2.0 Advanced Setup
___________________________________________________________________
1.0 Installation Notes For Win95 OSR2 Users
_________________________________________________________
1. Shutdown the computer and plug the DP83815 adapter into the PCI slot.
2. After starting Windows 95 OSR2, the "National Semiconductor
Corp. DP83815 10/100 MacPhyter3v PCI Adapter" will be detected
automatically, then the Update Device Driver Wizard window appears.
3. Click the Next button in the Update Device Driver Wizard window.
Windows will start to search floppy drive A for network driver,
and Windows displays the message
"Windows was unable to locate a driver for this device"
4. Insert the NSC DP83815 10/100 MacPhyter3v PCI Adapter installation
diskette into drive A.
5. Click the "Other Location..." in the Update Device Driver Wizard
window, then the Select Other Location window appears.
6. Type A:\WIN95 and click OK button.
7. Click Finish button, then Windows starts to copy the NSC DP83815 driver
to the user's hard disk.
8. Restart your computer.
2.0 Advanced Setup
__________________
When you need to change the speed and duplex for DP83815 adapter.
The following step will help you to finish the setting.
1. Click on "Control Panel", then click on "Network".
2. Click on the "National Semiconductor Corp. DP83815 10/100 MacPhyter3v
PCI Adapter" selection.
Then, click on "Properties".
3. Click on the "Advanced" in the DP83815 adapter card window.
4. Click on the "Network Media" property selection.
5. Then he system will show the following selections:
Auto Sense
10BaseT
10BaseT Full duplex
100BaseTX
100BaseTX Full duplex
Choose the setting as you needed.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.