1. theflop.zip Driver
2. comport.txt File Contents

comport.txt Driver File Contents (theflop.zip)

Changing the COM port settings
------------------------------


More recent versions of Windows recognize more
than four COM (Communications) Ports.  Since 
earlier software packages only recognize four,
you may need to change the COM port in order to
use older communications software.

1.  To change the COM port, click on the START 
button.  Select SETTINGS and choose CONTROL PANEL.

2.  Double-click on the SYSTEM icon and select 
the DEVICE MANAGER.  Select the MODEM tab and 
highlight the modem to reconfigure.  Press 
PROPERTIES.  All the modem properties will be 
displayed.

3.  Select the RESOURCES tab.  The input/output
range and setting display for the modem.  Highlight
the input/output range.

4.  To change the settings, deselect the USE 
AUTOMATIC SETTINGS indicator box, then press 
CHANGE SETTINGS.... The EDIT INPUT/OUTPUT RANGE 
window is displayed.

5.  Select one of the following values that 
correspond to the first four COM ports:

Base I/O	COM Port
03F8		COM 1
02F8		COM 2
O3E8		COM 3
O2E8		COM 4		

Note:  In the lower portion of the window, a 
message will display if there is a conflicting 
device already using the selected COM port.

6.  Press OK to accept the value, then Press 
OK to close the window.  A warning window displays 
to verify you want to create a forced configuration.
Press YES.

Remember to reset your software after making the change!