smscirda.inf Driver File Contents (R141765.EXE)

; Portions Copyright (c) 1996-2001 National Semiconductor Corp.
; Copyright (c) 1996-2001 Microsoft Corporation.
; Copyright (c) 1996-2006 SMSC

; This INF is designed for installation as part of the NT CD.  To change it to
; floppy based install, comment out any lines ending with "; CD only"
; and uncomment all lines ending with "; floppy only"

[Version]
Signature   = "$Windows NT$"
Provider    = %SMC%
Class       = Infrared
ClassGUID   = {6bdd1fc5-810f-11d0-BEC7-08002BE2092F}
DriverVer   = 10/18/2006, 6.0.4000.1
CatalogFile = smscirda.cat

[SourceDisksNames]		; floppy only
1 = %MediaDescription%,,			; floppy only

[SourceDisksFiles]		; floppy only
smscirda.sys = 1		; floppy only

[DestinationDirs]
;
;  Specify destination directories for groups of files.
;  '12' indicates the Windows drivers directory.
;  '17' indicates the Windows Inf directory.
;
DefaultDestDir=12

[SMC_CopySys]
;
;  This section lists the source and destination names of files that need
;  to be copied to the user's drive.  The destination directory is given
;  in the [DestinationDirs] section above.
;
smscirda.sys,,,2 ; Do not Skip File

[ControlFlags]
ExcludeFromSelect= *SMCF010
ExcludeFromSelect= *SMCF020
ExcludeFromSelect= *SMCF030


[Manufacturer]
;
;  Specify a name and devices section for each supported manufacturer that
;  makes products of this class.
;

;x86 device section(s)
%SMC% = SMC_Devices

[SMC_Devices]
;
;  This section describes the devices of this class made by a particular
;  manufacturer which are supported on the x86 processor architecture
;  The first descriptor, delimited by '%', is a symbolic string whose actual
;  value is given in the [Strings] section below.
;
%SMCF010.DeviceDesc% = SMCF010_ndi,   *SMCF010    ; Generic SMC driver
%SMCF020.DeviceDesc% = SMCF020_ndi,   *SMCF020    ; ATI
%SMCF030.DeviceDesc% = SMCF030_ndi,   *SMCF030    ; Toshiba 

[SMCF010_ndi]
DelReg      = SMC_DelReg
AddReg      = SMC_AddReg,*SMCF010_AddReg,Dongle_Addreg,Speed_Addreg,Mode_Addreg,Turn_Addreg,Help_AddReg
BusType     = 14
Characteristics = 0x84  ; NCF_PHYSICAL | NCF_HAS_UI
CopyFiles   = SMC_CopySys

[SMCF020_ndi]
DelReg      = SMC_DelReg
AddReg      = SMC_AddReg,*SMCF010_AddReg,Dongle_Addreg,Speed_Addreg,Mode_Addreg,Turn_Addreg,Help_AddReg,ForceDRQ_Addreg
BusType     = 14
Characteristics = 0x84  ; NCF_PHYSICAL | NCF_HAS_UI
CopyFiles   = SMC_CopySys

[SMCF030_ndi]
DelReg      = SMC_DelReg
AddReg      = SMC_AddReg,*SMCF030_AddReg,Speed_Addreg,Mode_Addreg,Turn_Addreg,Help_AddReg  ;don't display Xceiver choices
BusType     = 14
Characteristics = 0x84  ; NCF_PHYSICAL | NCF_HAS_UI
CopyFiles   = SMC_CopySys

[SMCF010_ndi.Services]
AddService= SMSCIRDA, 2, SMCIRDA.AddService, common.EventLog

[SMCF020_ndi.Services]
AddService= SMSCIRDA, 2, SMCIRDA.AddService, common.EventLog

[SMCF030_ndi.Services]
AddService= SMSCIRDA, 2, SMCIRDA.AddService, common.EventLog

[SMC_AddReg]
; Interfaces
HKR, Ndi,            Service,       0, %SERVICESTATION%
HKR, NDI\Interfaces, DefUpper,      0, ndisirda
HKR, NDI\Interfaces, UpperRange,    0, ndisirda
HKR, Ndi\Interfaces, DefLower,      0, nolower
HKR, Ndi\Interfaces, LowerRange,    0, nolower
HKR, Ndi,            RequiredAll,   0, %MS_INTERFACE%


[*SMCF010_AddReg]
HKR,,BoardType,0,"3"
HKR,NDI\params\Dongle_A_Type,default,,%SMCF010_DONGLE_A% 
HKR,NDI\params\MaxConnectRate,default,,%SMCF010_MAX_CONNECT%
HKR,NDI\params\Xceiver_Turn,default,,%SMCF010_XCEIVER%
HKR,NDI\params\TurnaroundTime,default,,%SMCF010_TURN%

HKR,,Dongle_A_Type,0,%SMCF010_DONGLE_A%   		; do this to force the value into the main registry key 
HKR,,MaxConnectRate,0,%SMCF010_MAX_CONNECT%
HKR,,Xceiver_Turn,0,%SMCF010_XCEIVER%
HKR,,TurnaroundTime,0,%SMCF010_TURN%


[*SMCF030_AddReg]
HKR,,BoardType,0,"3"
HKR,NDI\params\MaxConnectRate,default,,%SMCF030_MAX_CONNECT%
HKR,NDI\params\Xceiver_Turn,default,,%SMCF030_XCEIVER%
HKR,NDI\params\TurnaroundTime,default,,%SMCF030_TURN%

HKR,,Dongle_A_Type,0,%SMCF030_DONGLE_A% 					;hardwired for HP transceiver
HKR,,MaxConnectRate,0,%SMCF030_MAX_CONNECT% ; do this to force the value into the main registry key 
HKR,,Xceiver_Turn,0,%SMCF030_XCEIVER%
HKR,,TurnaroundTime,0,%SMCF030_TURN%

[Dongle_Addreg]
;
; These entries allow the user to select the Configuration Register
; from the dialog box AFTER INSTALLATION (under the 'Advanced' options).
; The user's selection is recorded in the registry and then read out
; by the smscirda.sys driver at boot time.
;

HKR,NDI\params\Dongle_A_Type,ParamDesc,,%Dongle_A%
HKR,NDI\params\Dongle_A_Type,flag,1,20,00,00,00
HKR,NDI\params\Dongle_A_Type,type,,enum
HKR,NDI\params\Dongle_A_Type\enum,"0",,%DongleType_0%
HKR,NDI\params\Dongle_A_Type\enum,"1",,%DongleType_1%
HKR,NDI\params\Dongle_A_Type\enum,"2",,%DongleType_2%
HKR,NDI\params\Dongle_A_Type\enum,"3",,%DongleType_3%
HKR,NDI\params\Dongle_A_Type\enum,"4",,%DongleType_4%


[Speed_Addreg]
;
; These entries allow the user to select the Configuration Register
; from dialog box AFTER INSTALLATION (under the 'Advanced' options).
; The user's selection is recorded in the registry and then read out
; by the smscirda.sys driver at boot time.
;

HKR,NDI\params\MaxConnectRate,ParamDesc,,%MaxConnectRate%
HKR,NDI\params\MaxConnectRate,type,,enum
HKR,NDI\params\MaxConnectRate\enum,"4000000",,%MaxConnectRate_6%
HKR,NDI\params\MaxConnectRate\enum,"1152000",,%MaxConnectRate_5%
HKR,NDI\params\MaxConnectRate\enum,"115200",,%MaxConnectRate_4%
HKR,NDI\params\MaxConnectRate\enum,"57600",,%MaxConnectRate_3%
HKR,NDI\params\MaxConnectRate\enum,"38400",,%MaxConnectRate_2%
HKR,NDI\params\MaxConnectRate\enum,"19200",,%MaxConnectRate_1%
HKR,NDI\params\MaxConnectRate\enum,"9600",,%MaxConnectRate_0%

[Mode_Addreg]
;
; These entries allow the user to select the Configuration Register
; from the dialog box AFTER INSTALLATION (under the 'Advanced' options).
; The user's selection is recorded in the registry and then read out
; by the smcirda.sys driver at boot time.
;

HKR,NDI\params\Xceiver_Turn,ParamDesc,,%Xceiver_Turn%
HKR,NDI\params\Xceiver_Turn,type,,enum
HKR,NDI\params\Xceiver_Turn\enum,"0",,%HD_200%
HKR,NDI\params\Xceiver_Turn\enum,"1",,%HD_300%
HKR,NDI\params\Xceiver_Turn\enum,"2",,%FD_300%

[Turn_Addreg]
;
; These entries allow the user to select the Configuration Register
; from dialog box AFTER INSTALLATION (under the 'Advanced' options).
; The user's selection is recorded in the registry and then read out
; by the smscirda.sys driver at boot time.
;

HKR,NDI\params\TurnaroundTime,ParamDesc,,%TurnaroundTime%
HKR,NDI\params\TurnaroundTime,type,,enum
HKR,NDI\params\TurnaroundTime\enum,"10000",,%TurnaroundTime_3%
HKR,NDI\params\TurnaroundTime\enum,"5000",,%TurnaroundTime_2%
HKR,NDI\params\TurnaroundTime\enum,"1000",,%TurnaroundTime_1%
HKR,NDI\params\TurnaroundTime\enum,"500",,%TurnaroundTime_0%

[ForceDRQ_Addreg]
HKR,,RxForceDrq,0,"1"    ; Only for ATI chipset.

[Help_Addreg]
HKR,NDI,HelpText,0,%IRMINI_HELP%

[SMC_DelReg]
HKR,,EnumPropPages32
HKR,NDI\params\MaxSpeed
HKR,NDI\params\MinTurnTime
HKR,NDI\params\RxSel
HKR,,AceTimer
HKR,,AceTxTimer
HKR,,DmaSingleMode
HKR,,Dongle_A_Type
HKR,,DuplexMode
HKR,,Environment
HKR,,MaxConnectRate
HKR,,MaxSpeed
HKR,,MinTurnTime
HKR,,RxSel
HKR,,RxForceDrq
HKR,,ShowNegotiationFrames
HKR,,SmcIrdaOptions
HKR,,SpeedEnable
HKR,,StuffFifo
HKR,,TurnaroundTime
HKR,,Xceiver_Turn
HKR,NDI\params\MaxConnectRate	
HKR,NDI\params\Dongle_A_Type
HKR,NDI\params\Xceiver_Turn
HKR,NDI\params\TurnaroundTime


[SMCIRDA.AddService]
DisplayName	    = %SMCIRDA.ServiceDesc%
ServiceType	    = 1 ; %SERVICE_KERNEL_DRIVER%
StartType	    = 3 ; %SERVICE_DEMAND_START%
ErrorControl	= 1 ; %SERVICE_ERROR_NORMAL%
ServiceBinary	= %12%\SMSCirda.sys        ;12=drivers directory
LoadOrderGroup	= NDIS

[common.EventLog]
AddReg = common.AddEventLog.reg

[common.AddEventLog.reg]
HKR, , EventMessageFile, 0x00020000, "%%SystemRoot%%\System32\netevent.dll"
HKR, , TypesSupported,   0x00010001, 7



[Strings]
;
;  This section defines symbolic string constants for use in the rest
;  of the .inf script.  You should create and use symbols for all
;  translatable strings in order to make localization easier.
;  Also, spaces within strings elsewhere in the script confuse infedit.exe;
;  so use symbolic constants for any multi-word strings.
;
MediaDescription = "IrDA miniport install disk"

IRMINI_HELP="The IrDA infrared port.  It can be used to establish wireless serial and network links to other computers."
SMCIRDA.ServiceDesc="SMSC Infrared Device Driver"
SMCF010.DeviceDesc="SMSC Fast Infrared Driver"
SMCF020.DeviceDesc="SMSC Fast Infrared Driver"
SMCF030.DeviceDesc="SMSC Fast Infrared Driver(IR module:HP)"

V_CLASSNAME="Infrared adapters"

SMC="SMSC"
SERVICESTATION = "SMSCIRDA"
MS_INTERFACE = "MS_IrDA"

SMCF010_DONGLE_A = "0"
SMCF010_MAX_CONNECT = "4000000"
SMCF010_TURN = "1000"
SMCF010_XCEIVER = "0"
Dongle_A="Infrared Transceiver Type"
SMCF030_DONGLE_A = "2"
SMCF030_MAX_CONNECT = "4000000"
SMCF030_TURN = "1000"
SMCF030_XCEIVER = "0"


DongleType_0="AUTO [Default]"
DongleType_1="TEMIC"
DongleType_2="HP"
DongleType_3="Sharp"
DongleType_4="VISHAY"

MaxConnectRate_6 ="4 Mbps"
MaxConnectRate_5 ="1.152 Mbps"
MaxConnectRate_4 =" 115.2 kbps"
MaxConnectRate_3 ="  57.6 kbps"
MaxConnectRate_2 ="  38.4 kbps"
MaxConnectRate_1 ="  19.2 kbps"
MaxConnectRate_0 ="   9.6 kbps"

TurnaroundTime_3 = "10.0 ms"
TurnaroundTime_2 = " 5.0 ms"
TurnaroundTime_1 = " 1.0 ms [Default]"
TurnaroundTime_0 = " 0.5 ms"

MaxConnectRate="Maxiumum Connect Rate"
TurnaroundTime="Minimum Turnaround Time"
Xceiver_Turn="Transceiver Turnaround Mode"
HD_200="Mode 1:HD200 [Default]"
HD_300="Mode 2:HD300"
FD_300="Mode 3:FD300"
Download Driver Pack

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

  • Expand the archive file (if the download file is in zip or rar format).

  • If the expanded file has an .exe extension, double click it and follow the installation instructions.

  • Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

  • Find the device and model you want to update in the device list.

  • Double-click on it to open the Properties dialog box.

  • From the Properties dialog box, select the Driver tab.

  • Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.

server: ftp, load: 1.11