- Version Information NewDVR System Ver2.2.3 Build No.161 - Applied Driver Information Driver version: xecap 220.127.116.11, xed 18.104.22.168 - What s New? Ver2.2.3 Build No.161 01. Watchdog error modified. 02. Modified ND error when the system is rebooting. 03. The system schedule works; only every minute. Ver2.2.2 Build No.158 01. When you set up a Display Channel with Drag & Drop, it will not change the Channel position even you use panorama or other set up. 02. Modified malfunction of Drag & drop on submonitor. 03. In NDHooker, we add Thread for Alarm-Out(Sensor-Out) test. (Support VisionRide) 04. Modified the block When Alarm-Out is running through NDHooker. (Support VisionRide) 05. Modified performance of being blacked on display mode when the setup of NTSC / PAL is wrong. 06. Modified error Schedule in System menu. 07. Modified error of not being display of server setup on CMS sub-monitor. Ver2.2.1 Build No.150 01. Adding Quick Search Function on main server(not able to use search mode simultaneously) 02. Adding Color Setting Pop-up Window on main server 03. Deleting modify buttom from setup schedule setting and improve user convenient. 04. Modify the method of transfering video when camera loss happen while capturing screen 05. Send camera loss status to NDhooker(support VisionRide) 06. Modify problem when the language is changed Ver2.2.0 Build No.144 01. NewDVR Included NDHook which has external multi video display (Support VisionRide) 02. Completed compatibilty of senser out between NewDVR and NDHook 03. Modified the method of operating senser function by user(Using On-Off instead of timeselect) 04. Support XeD TV-Out OSD (Work properly after firmware 07,03,01,00 version) Ver2.1.1 Build No.139 01. Add PanTilt Protocol(SPT15RECEIVER) 02. Modified the error back play which can not play previous recorded file. 03. Modified the error can not video play when user move the play bar. 04. Modified the error Apply Screen Division at Start-up in Video Display Option. 05. Add IP Address and Port Number information in Sever set up. 06. Support 0808 NewDIO. Ver2.1.0 Build No.136 01. Modified the error of disable state when specific channel usage is disable 02. Improve video display Ver2.0.9 Build No.134 01. Video frame control bar error enable/disable is completed in setup mode 02. Modified register same IP address in CMS mode Ver2.0.8 Build No.132 01. Modified CMS skin error Ver2.0.7 Build No.131 01. Improve log message process 02. Modified error Pelco-D protocol Ver2.0.6 Build No.129 01. Completed audio volume error 02. Program running time is reduced Ver2.0.5 Build No.126 01. Modified auto switch screen error 02. Modified repartition error in PAL mode 03. Modified SKIN 04. Modified paint image error after exit program Ver2.0.4 Build No.122 01. Modified system down when user setting authority tab 02. Modified multi language error 03. GUI error modified at setup program 04. Application motion detection area and setup motion detection area do not match 05. Modified CMS does not shot down, after using PanTilt 06. Modified error, which DIO board can not control the PanTilt 07. Add PanTilt Protocol(VRX-2101 Receiver) Ver2.0.3 Build No.115 01. Completed error in audio setup Ver2.0.2 Build No.114 01. Fixed a bug that wrong GUI skin loaded 02. Fixed a bug that a cancel button in MD setting did not work 03. CMS can read server DVR version information 04. Advanced the transferring speed with audio in CMS Ver2.0.1 Build No.110 01. Tool-bar Supported on full screen in live. 02. Russian Language Added. Ver2.0.0 Build No.103 01. Panorama export function is added. 02. Master / Slave sensor supported. Ver2.0.0 Build No.100 01. Multi-monitors Support. 02. Single Driver Overwriting Support. 03. Overwriting Video Data per Minute. 04. Bookmark in Search. 05. Panorama Video Display in Live Display and Search. 06. Zoom In/Out in Search. 07. Updated Search Interface. 08. Added Main Display Modes. 09. Color Adjustment for Brightness and Contrast. 10. CMS Management Program.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.