This file covers the following topics:
A. Installing the driver for IBM LAN Server 4.0 and OS/2 Requester
B. Installing the driver for IBM LAN Server 4.0 DOS LAN Service
C. Installing the driver for IBM LAN Server 3.0
D. Installing the driver for IBM LAN Server 3.0 DOS Client
Please also refer to the DC21X4.DOC file for how to set the optional
configuration keywords for the system PROTOCOL.INI.
A. Installing the driver for IBM LAN Server 4.0 and OS/2 Requester
------------------------------------------------------------------
1 In IBM LAN server, select or run MPTS (Multi-Protocol Transport Services)
program.
2 Press <Configure> button.
3 From the "Configure" dialog box, select <LAN Adapters and Protocols> option.
4 Press <Configure> button.
5 When "LAPS" dialog box is displayed, remove the current protocols and
adapter from the Current Configuration list box.
6 Since the KF-221FX Fast Ethernet PCI adapter is not in the adapter list, press
<Other adapters> button.
7 Insert the adapter driver diskette into floppy drive A:.
8 Specify the drive and path for the driver as below:
A:\IBMLS\OS2
9 "KF-221FX Fast Ethernet PCI Adapter" will be moved into the adapter
list.
10 Highlight your adapter. Then press <Add> button to add it into the
Current Configuration list.
11 Add the required protocols for the adapter added.
12 Press <OK> button.
13 Press <Close> button.
14 Press <Exit> button to complete MPTS program.
15 The installation of the NDIS 2.01 driver for IBM LAN Server is
complete.
B. Installing the driver for IBM LAN Server 4.0 DOS LAN Service
---------------------------------------------------------------
1 Copy the NDIS 2.01 driver and installation files to the hard disk.
Create the C:\NDIS2 directory on the hard disk for the PCI adapter
and installation files. Insert the driver diskette into the floppy drive
and enter the following commands at the DOS prompt:
MD C:\NDIS2
COPY A:\IBMLS\DOS\*.* C:\NDIS2
2 Install IBM LAN Server 4.0 DOS LAN Services program.
a) Insert "IBM LAN Server DOS LAN Services Disk 1" diskette into the
floppy disk drive and enter the following commands at the DOS prompt:
A:
INSTALL
b) When the installation program asks where the OEMSETUP.INF file
resides, answer with the path name where the driver files were
copied in step 2. In this example, it should be:
C:\NDIS2
c) Then, follow the instructions on the screen and refer to the IBM
LAN Server 4.0 DOS Services Installation Guide, when needed, to
complete the installation procedure.
d) Let the installation program automatically update the CONFIG.SYS
and AUTOEXEC.BAT files to add the necessary commands to invoke the
DOS LAN Services program every time the computer is booted.
3 Reboot the computer.
Reboot the computer to have the changes in the CONFIG.SYS and
AUTOEXEC.BAT take effect.
4 The IBM LAN Server 4.0 DOS LAN Services installation is complete.
C. Installing the driver for IBM LAN Server 3.0
-----------------------------------------------
1 Insert the adapter driver diskette into floppy drive A:.
2 In IBM LAN server, select or run the LAPS (LAN Adapter and Protocol Support)
program.
3 From the IBM LAPS dialog box, choose the <INSTALL> button to install the
PCI adapter for the IBM LAN Server environment.
4 Specify the drive and path, A:\IBMLS\OS2, to your adapter driver diskette.
5 After installing/copying the appropriate NIF files from the driver diskette,
the IBM LAPS dialog box will appear again.
6 Select the <Configure>.
7 Choose the <Configure LAN transports> option and select <Continue>.
8 When Configure Workstation dialog box is displayed, remove the current
configuration from the Current Configuration list box.
9 Choose "KF-221FX Fast Ethernet PCI Adapter" from the list box. Then
choose <Add> to add the adapter to the Current Configuration list box.
10 Highlight the appropriate protocols in the Protocol list box. Then
choose <Add> to add them to the Current Configuration list box.
11 Choose <OK>.
12 The installation of the NDIS 2.01 driver for IBM LAN Server is complete.
D. Installing the driver for IBM LAN Server DOS Client
------------------------------------------------------
1 Use DXMAID to install the protocol and adapter driver
for DOS Requester for the client.
2 Select WD driver as a temporary driver. Later, replace it with KF-221FX
Fast Ethernet PCI Adapter.
3 DXMAID program created a sub-directory \lsp.
4 Copy the NDIS driver dc21x4.dos from directory \IBMLS\DOS in the Driver
Diskette.
5 Edit the CONFIG.SYS to remove WD driver and insert dc21x4.dos driver line
as below:
........
device=\lsp\protman.dos /I:\lsp
NDIS driver -> device=\lsp\dc21x4.dos
device=\lsp\dxma0mod.sys 001
device=\lsp\dxmj0mod.sys
lastdrive=Z
6 Edit the PROTOCOL.INI to remove WD driver section and insert [DC21X4]
driver section. All bindings that refer to WD driver should be updated
to binding to [DC21X4] driver.
*** PROTOCOL.INI ***
[PROTMAN_MOD]
DriverName = PROTMAN$
[DXMJ0MOD_MOD]
DriverName = NETBEUI$
Bind to DC21X4 -> Bindings = DC21X4
NCBS = 15
ADAPTRATE = 1000
WINDOWERROR = 0
PIGGYBACKACKS = 1
DATAGRAMPACKETS = 2
PACKETS = 50
PIPELINE = 20
MAXTRANSMITS = 6
MINTRANSMITS = 2
LANABASE = 0
CHAINX5C = 0
[DC21X4]
Drivername = dc21x4$
SIA_MODE = AUTOSENSE
7 Now, your computer has been configured to use the PCI Adapter for
IBM LAN Server 3.0.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.