=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
Exabyte Packetloader Windows 2000/XP/2003 Driver ver1.00.0000.1 (06/14/04)
Copyright(C) Exabyte Corp. 1997-2004
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
This PacketLoader(PL) driver is for use with the Exabyte Packetloader and the
Native backup software on Windows2000, XP, and 2003.
If you use a commercial backup software package that provides
its own driver to support the PacketLoader, please do not install
this driver.
CONTENTS:
Following information is available in this README file:
1. System requirements
2. Windows2000 Driver Installation
3. Known problem with 1394(Firewire) unit on Windows2000
4. WindowsXP / 2003 Driver Installation
5. Modifications
6. Troubleshooting
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
1. SYSTEM REQUIREMENTS
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Operating System:
- Windows2000
- WindowsXP
- Windows2003
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
2. Windows2000 DRIVER INSTALLATION
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
1. Boot the machine to Windows2000.
2. Click on Start / Settings / Control Panel, then double click
the System icon.
3. Click on the Hardware tab then Click on the Device Manager
button.
4. If the PacketLoader is SCSI, you will see a device with the
name of "Unknown Medium Changer" in the "Medium Changers"
category.
If the PacketLoader is 1394(Firewire), you will see a device
with the name of "Exabyte VXA 1x10 1U" in the "Other devices"
category.
5. Right click the device and click Properties.
6. Click the Driver tab on the properties dialog and click
"Update Driver..." button.
7. The Upgrade Device Driver Wizard appears. Click Next.
8. Choose the second radio button, which says "Display a list
of known drivers so that I can choose a specific driver".
Click Next.
9. If the PacketLoader is 1394 (Firewire), the Hardware Type
window will be displayed. Select "Other Devices" from
the hardware type list, and click the Next button to continue.
If the PacketLoader is SCSI, the Hardware Type window will
not be displayed.
10. At the "Select a Device Driver" window, click the HAVE DISK
button.
11. At the "Install from Disk" window, click the BROWSE button.
12. At the "Locate File" window, browse to the directory where
you have downloaded and extracted the driver.
Select the OPEN button and the OK button to confirm the
directory path.
13. At the "Select a Device Driver" window, select the
PacketLoader product name from the list shown. Click the
NEXT button.
14. An "Update Driver Warning" may be displayed. If it is,
select the YES button to continue.
15. At the "Start Device Driver Installation" window, click
the NEXT button to continue with driver installation. Then
click on the FINISH button to close the wizard.
16. The PacketLoader driver is now installed. The Exabyte PacketLoader
should be listed under Medium Changers in the Device Manager window.
17. Reboot the system.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
3. Known problem with 1394(Firewire) unit on Windows2000
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
1. Native Backup software on Windows2000 does not see the device.
Windows2000 does not support 1394 Medium changer devices even if
this driver is loaded.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
4. WindowsXP/2003 DRIVER INSTALLATION
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
1. Boot the machine to WindowsXP/2003.
2. Click on Start / Settings / Control Panel, then double click
the System icon.
3. Click on the Hardware tab then Click on the Device Manager
button.
4. If the PacketLoader is SCSI, you will see a device with the
name of "Unknown Medium Changer" in the "Medium Changers"
category.
If the PacketLoader is 1394(Firewire), you will see a device
with the name of "PowerFile C200" in the "Medium Changers"
category.
5. Right click on the device and select "Update Driver..." from
the drop-down menu.
6. The Upgrade Device Driver Wizard appears.
7. Choose the second radio button, which says
"Install from a list or specific location. (Advanced)".
Click Next.
8. Choose the second radio button, which says
"Don't search. I will choose the driver to install."
Click Next.
9. At the "Select a Device Driver" window, click the HAVE DISK
button.
10. At the "Install from Disk" window, click the BROWSE button.
11. At the "Locate File" window, browse to the directory where
the driver was downloaded and extracted.
Select the OPEN button and the OK button to confirm the
directory path.
12. At the "Select a Device Driver" window, select the
PacketLoader product name from the list shown.
Click the NEXT button.
13. A warning may be displayed indicating that the software has
not passed Windows Logo testing. Click the CONTINUE ANYWAY
button. Click the FINISH button to close the wizard.
14. The PacketLoader driver is now installed. The Exabyte PacketLoader
should be listed under Medium Changers in the Device Manager window.
15. Reboot the system.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
5. MODIFICATIONS
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
3/10/2004 1.00.0000.0 Initial release
Support Scsi 1U
Files exapl.inf(3/10/2004,2:17PM)
exapl32.sys(3/10/2004, 2:23PM)
readme.txt
6/14/2004 1.00.0000.1 Support Windows2000
Support 1394 1U (Firewire)
Files exapl.inf(6/14/2004)
exapl2k.sys(5/06/2004, 5:21PM)
exapl32.sys(3/10/2004, 2:23PM)
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
6. TROUBLE SHOOTING
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
If you encounter any difficulty installing the driver, or if you have more
questions concerning the configuration of your packetloader,
please call Exabyte Technical Support.
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.