******************************************* USB97C210 Windows 2000 Driver Release Notes ******************************************* Files Included With This Distribution: ______________________________________ smscstor.sys smscstor.inf readme.txt Installation Instructions: ______________________________________ 1. Plug the USB97C210 device into a free USB 1.1 or 2.0 port on the host. 2. Windows 2000 will automatically load it's own mass storage class driver. Once the device has been enumerated, you will only see 1 icon is Windows Explorer. This is because the Windows 2000 native mass storage class driver does not provide support for multiple LUN devices like the USB97C210. 3. Go to the Device Manager and expand the "Universal Serial Bus Controllers" branch by clicking the "+" sign to the left of it. 4. Look for an entry under Universal Serial Bus Controllers called "USB Mass Storage Device". Caution: If you have a USB hard drive, USB floppy drive or some other USB mass storage class device attached to your system, you will see more than one "USB Mass Storage Device" entry. If possible, you should unplug these devices to avoid any confusion. 5. Once you have identified the USB Mass Storage Device entry for the USB97C210 device, double click it to bring up the "Driver Properties" dialog. 6. Click the "Driver" tab at the top, and then click the "Update Driver" button. This will start the "Upgrade Device Driver" wizard. 7. Follow the Update Device Driver wizard, and when asked for the location of the driver, select the "Specify Location" check box and click "Next". 8. Browse to the location of the USB97C210 Windows 2000 installation files, select "OK" and then keep clicking the "Next" button until you get to the "Finish" dialog. Press "Finish" to complete the installation. 9. You can now go to Windows Explorer, and you should see one drive icon for each supported flash media type. Architecture and Capabilities: ______________________________________ 1. WDM based architecture 2. Supports up to 16 LUNs 3. Supports only BULK-ONLY Protocol devices Known Issues: ______________________________________ 1. Driver will not load if Device fails on "GetMaxLun" command 2. Does not handle "IOCTL_SCSI_PASS_THROUGH" and "IOCTL_SCSI_PASS_THROUGH_DIRECT" 3. smscstor.sys file version 1.4.0.0 adds support for the Mode Sense 10 command implemented in the USB97C210 firmware starting with version 0.0.0.57. Previous versions of smscstor.sys will not work with this new firmware, you must upgrade the driver to driver to version 1.4.0.0.Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.