1. LAN.zip Driver
2. SetupVCTwin.txt File Contents

SetupVCTwin.txt Driver File Contents (LAN.zip)

(C)Copyright 2003-2006 Marvell(R).
All rights reserved.
===========================================================================

SetupVCTwin.txt created 26-Jan-2006

Readme File for SETUPVCTWIN.exe v2.15.1.3
Marvell Yukon Family Ethernet Controller



This file contains
 1  Overview
 2  Required Files
 3  Installation Instructions
 4  Troubleshooting


===========================================================


1  Overview
===========

The Virtual Cable Tester(TM) installation package contains
the Marvell Virtual Cable Tester(TM) application.

This README file explains how to install the Virtual Cable
Tester(TM) Package on a machine running Windows 2000,
Windows XP, Windows Server 2003 and 64-bit extended Windows.


NOTE:
The Marvell Virtual Cable Tester(TM) can only be used with
Windows 2000, Windows XP, Windows Server 2003 and 64-bit
extended Windows.



2  Required Files
=================

To install the Marvell Virtual Cable Tester(TM), the
following file is required:

    SetupVCTwin.exe


3  Installation Instructions
============================



NOTE:
To install the Marvell Virtual Cable Tester(TM) make sure
that you are logged in as a user with administrative rights.

To install the Marvell Virtual Cable Tester(TM), proceed as
follows:

1. Execute the setup file SetupVCTwin.exe.

2. Follow the instructions of the installation procedure.


***


4  Troubleshooting
==================

If you should encounter any problems with your Marvell
Virtual Cable Tester(TM) Package, please re-read the
instructions above and the documentation supplied with the
operating system carefully.
Additionally refer to your system event log file (using the
Event Viewer) and check it for entries from Marvell Virtual
Cable Tester(TM).

If your particular problem is not listed or the error
persists, please send your system event log file or at least
the event id number and the logging data (as WORDs) of the
entries made by Marvell Virtual Cable Tester(TM) to our
technical support.

For further information please contact support.
*** End of Readme File ***

How To Update Drivers Manually

After your driver has been downloaded, follow these simple steps to install it.

• Expand the archive file (if the download file is in zip or rar format).

• If the expanded file has an .exe extension, double click it and follow the installation instructions.

• Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.

• Find the device and model you want to update in the device list.

• Double-click on it to open the Properties dialog box.

• From the Properties dialog box, select the Driver tab.

• Click the Update Driver button, then follow the instructions.

Very important: You must reboot your system to ensure that any driver updates have taken effect.

For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.