********************************USB DSL TEST GUI********************************
********************************************************************************
* DSL GUI Version : 2.02
* Driver Version : 9.D
* Hardware Version : 500B
* Firmware Version : 0
* Operating System: Microsoft Windows 98 SE
* Number of Processor : 1
* Processor Architecture : INTEL
* Processor Level : 6
* Processor Model : 20
* Processor Stepping : 54
* Memory Usage : 29%
* Total Physical Memory : 267931648
* Available Physical Memory : 138035200
* Total Virtual Memory : 2143289344
* Available Virtual Memory : 2116354048
* Start Time : Saturday, February, 21, 2004 15:6
********************************************************************************
********************************************************************************
DSL TEST CONFIGURATION
INTERFACE TEST CONFIGURATION :
TEST : ENABLED
MODEM TEST CONFIGURATION :
TEST : ENABLED
EXPECTED DSL MODE : G.DMT
DATA MODE TIMEOUT : 60
VPI : 0
VCI : 38
LINE TEST CONFIGURATION :
TEST : ENABLED
OAM_VPI : 0
OAM_VCI : 38
NUMBER OF CELLS TO SEND : 5
OAM LOOPBACK TYPE : F5E2E
NETWORK TEST CONFIGURATION :
TEST : ENABLED
VPI : 0
VCI : 38
EXPECTED DRIVER TYPE : WAN
EXPECTED ENCAPSULATION : BRIDGE_LLC
********************************************************************************
********************************************************************************
DSL TEST RESULTS
1 - INTERFACE TEST RESULTS :
The interface test is passed
2 - MODEM TEST RESULTS :
TEST IS FAILED : The RT modem is failed to get sync
Possible causes :
1 - The line type (DSL mode) does not match with the line type at CO side.
Remedies :
1 - Check the line type (DSL mode) and use correct mode to match with CO side.
------->LINE test is requested but did not proceed because the interface/DSL tests are failed
------->Network test is requested but did not proceed because the interface/DSL tests are failed
********************************************************************************
********************************************************************************
CMV CONFIGURATION
1 - DIAG02 : FFFFFFFF
2 - DIAG03 : 0
3 - DIAG22 : 0
4 - DIAG23 : 0
5 - DIAG25 : 0
6 - DIAG47 : 0
7 - DIAG49 : 0
8 - DIAG51 : 0
9 - DIAG52 : 0
10 - DIAG53 : 0
11 - DIAG54 : 0
12 - INFO10 : 0
13 - INFO08 : 0
14 - INFO14 : 0
15 - OPTN00 : 8002C444
16 - OPTN02 : 0
17 - OPTN04 : 0
17 - OPTN07 : 0
18 - PSDM01 : 0
19 - RATE00 : 0
20 - STAT00 : 80008000
********************************************************************************
********************************************************************************
Download Driver Pack
After your driver has been downloaded, follow these simple steps to install it.
Expand the archive file (if the download file is in zip or rar format).
If the expanded file has an .exe extension, double click it and follow the installation instructions.
Otherwise, open Device Manager by right-clicking the Start menu and selecting Device Manager.
Find the device and model you want to update in the device list.
Double-click on it to open the Properties dialog box.
From the Properties dialog box, select the Driver tab.
Click the Update Driver button, then follow the instructions.
Very important: You must reboot your system to ensure that any driver updates have taken effect.
For more help, visit our Driver Support section for step-by-step videos on how to install drivers for every file type.