1. Netgear_EA201__Zipped_.zip Driver
2. NT40.TXT File Contents

NT40.TXT Driver File Contents (Netgear_EA201__Zipped_.zip)

\HELP\WINNT\NT40.TXT

                      NETGEAR EA201 Ethernet Card
                      ---------------------------
               Driver Installation for Microsoft Windows NT 4.0
               ------------------------------------------------

  Installation Procedure
  ----------------------
  1.  The Windows NT CD-ROM or diskettes are needed for the following
      procedure.

  2.  Insert the EA201 network adapter into your computer and start your
      Windows NT 4.0 system normally.

  3.  Open "My Computer" -> "Control Panel" -> "Networks" icons.

  4.  Select "Adapters" -> "Add" -> "Have disk".  Enter the drive leter
      where the Drivers and Diagnostics disk is inserted.

        eg. > A:\

      Select the "NETGEAR EA201 Ethernet Card".

  5.  Windows NT will copy the driver files from the EA201 directory. It
      also will pop up with the configuration window.  You can assign the
      "I/O Port:", "IRQ Number:", "Duplex Mode:", and "Network Address"
      here.

      For "I/O Port:", choose the right I/O address (Please reference
      SETUP.EXE of release driver diskette root directory)

      For "IRQ Number:", choose the right Interrupt (Please reference
      SETUP.EXE of release driver diskette root directory)

      For "Duplex Mode:", choose the "Half Duplex" option, when card
      connect to 10M Hub device (Half Duplex is default). Choose the
      "Full Duplex" option, when card connect to switch device that
      support 10M full duplex mode.

      Caution: Unless necessary, do not modify the NetworkAddress field.
      The driver will use the default unique Ethernet address contained in
      the serial ROM on the adapter.

  6.  After completing the file copy process, Windows NT will prompt you for
      reboot the PC.  Select YES to restart the system.