1. AMOUSE.zip Driver
2. WINDOWS.TXT File Contents

WINDOWS.TXT Driver File Contents (AMOUSE.zip)

            Mouse Driver Installation for Microsoft Windows 3.x

Contents:

1. Introduction
     Files for Microsoft Windows 3.x in this diskette
2. Set Up This Mouse Under Microsoft Windows 3.x


1. Introduction

        This file is helping you to set up this mouse so you can use it
under Microsoft Windows 3.x environment.  Information in this file is the
latest, so if there is any conflicting to the Mouse User's Manual, you
should believe this file.

              Files for Microsoft Windows 3.x in this diskette

WINDOWS.TXT -- this file.
OEMSETUP.INF -- additional information about file SETUP.INF.
AMOUSE.DRV -- mouse driver for Windows 3.x.  With this driver you can use
              a Microsoft mouse, a Bus mouse or a PS/2 mouse along with your
              computer.

        You may use Microsoft Windows' mouse driver for your mouse
because they are compatible with each other.  However, we would still suggest
you to use our mouse driver.  It would work better that way.


2. Set Up This Mouse Under Microsoft Windows 3.x

A.  Connect your mouse to the computer by doing
        *   Turn off the computer.
        *   Plug your mouse into the mouse port (it is usually in the back
            of the computer).  If the port's pin number does not match the
            mouse connector's hole number, use an adapter.
        *   Turn on the computer.
B.  Go to your Microsoft Windows 3.x directory, then type "setup <enter>".
C.  Insert your mouse driver diskette into the right floppy drive and
    choose 'Other mouse [Requires disk from OEM]...' for 'Mouse: '.
D.  Press <enter> and then choose your mouse driver, which is shown as
    "AMOUSE".
E.  Follow instructions on the computer screen to finish the setup task.
F.  Restart the computer then you are all set!