1. DE-528CT_XP.zip Driver
2. Nw500.txt File Contents

Nw500.txt Driver File Contents (DE-528CT_XP.zip)

   Server Driver for NetWare 5.00

   Introduction:
   -------------
   This document describes the procedure to install the NetWare v5.00
   server driver for D-Link DE-528CT PCI Adapter.

   Location of Driver:     \NWSERVER\500\DE528.LAN


   Installation Procedure:
   -----------------------
      Before you start with the installation process, make sure that
      the Novell NetWare v5.00 server is properly installed.
      Similarly, your adapter should also be properly installed in your
      server.


      A. First time installation from the install menu

        1. Start the NetWare Server.

           > CD \NWSERVER
           > SERVER

        2. Execute "LOAD NWCONFIG" after booting up. Type:

              LOAD NWCONFIG

        3. Select "Driver options", -> "Configure network drivers", and
           -> "Select a driver".

        4. Press <Insert> key to install an unlisted driver.

        5. Please insert release driver diskette into floppy disk.

        6. Press <F3> to specify a different <PATH>. <PATH> is directory
           which include both DE528.LAN and DE528.LDI

              Ex. A:\NWSERVER\500

        7. Select "DE528.LAN ...".

        8. Select "Save parameters and load driver" after configuring adapter
           setting.

        9. NetWare server will loading/binding driver automatically.

       10. After the driver has been loaded, check whether all the frame
           types you want are specified for this driver in AUTOEXEC.NCF.


      B. The other time installation from the install menu

        1. Start the NetWare Server.

           > CD \NWSERVER
           > SERVER

        2. Execute "LOAD NWCONFIG" after booting up. Type:

              LOAD NWCONFIG

        3. Select "Driver options", -> "Configure network drivers", and
           -> "Select a driver".

        4. Select "DE528.LAN ..." in Select a driver window.

        5. Select "Save parameters and load driver" after configuring adapter
           setting.

        6. NetWare server will loading/binding driver automatically.

        7. After the driver has been loaded, check whether all the frame
           types you want are specified for this driver in AUTOEXEC.NCF.


      C. Modifying an existing NetWare 5.00 Server

        1. Insert driver diskette into floppy disk drive.

        2. Copy all provided LAN files into your dos directory
           which include SERVER.EXE.

           Ex. >COPY A:\NWSERVER\500\DE528.LAN C:\NWSERVER
               >COPY A:\NWSERVER\500\DE528.LDI C:\NWSERVER

        3. Start the NetWare Server.

           > CD \NWSERVER
           > SERVER

        4. From the Novell Server side, execute "LOAD NWCONFIG". Type:
          
              LOAD NWCONFIG

           Select <NCF files options>
           Select <Edit AUTOEXEC.NCF file>

        5. Add the following commands into the server's AUTOEXEC.NCF file.

        LOAD C:\NWSERVER\DE528 SLOT=1 FRAME=Ethernet_802.3 NAME=DE528_1_E83
        BIND IPX DE528_1_E83 NET=1111

        LOAD C:\NWSERVER\DE528 SLOT=1 FRAME=Ethernet_802.2 NAME=DE528_1_E82
        BIND IPX DE528_1_E82 NET=1113

        LOAD C:\NWSERVER\DE528 SLOT=1 FRAME=Ethernet_SNAP  NAME=DE528_1_ESP
        BIND IPX DE528_1_ESP NET=1115

        LOAD C:\NWSERVER\DE528 SLOT=1 FRAME=Ethernet_II    NAME=DE528_1_EII
        BIND IPX DE528_1_EII NET=1117

        Note: The SLOT parameter should be set as the number of the PCI slot
              on which the adapter resides.

        6. Restart the server again.

   NOTES:
   ------

      1. Installing Multiple LAN Adapters:

         The keyword "SLOT" is provided for multiple LAN adapters in a
         single server by the driver DE528.LAN. So, add "SLOT" in LOAD
         commands. For example:

         ; adapter #.1
         LOAD DE528 SLOT=1 FRAME=Ethernet_802.2 NAME=LAN_A
         BIND IPX TO LAN_A NET=111
         ; adapter #.2
         LOAD DE528 SLOT=2 FRAME=Ethernet_802.2 NAME=LAN_B
         BIND IPX TO LAN_B NET=222

      2. Installing One LAN adapter with Multiple Frame Types:

         When binding multiple frame types to one adapter, enter a LOAD
         and BIND statement for each frame type. Each LOAD statement will
         use a different network number on the bind statement.
         It is required to supply a name on each load line in order to avoid
         being prompted for which board to bind IPX to. If you do not
         have the name option in the AUTOEXEC.NCF, it will not execute
         completely without user intervention.

         Example:

           LOAD DE528 FRAME=ETHERNET_802.3 NAME=DE528_1_E83
           BIND IPX TO DE528_1_E83 NET=11111

           LOAD DE528 FRAME=ETHERNET_802.2 NAME=DE528_1_E82
           BIND IPX TO DE528_1_E82 NET=33333

           LOAD DE528 FRAME=ETHERNET_SNAP  NAME=DE528_1_ESP
           BIND IPX TO DE528_1_ESP NET=55555

           LOAD DE528 FRAME=ETHERNET_II    NAME=DE528_1_EII
           BIND IPX TO DE528_1_EII NET=77777

   If problems occur during the binding process, your screen will prompt
   you with error messages. Please refer to your NetWare 386 manual for
   details on these messages.